Philips BT25 Manuel utilisateur

www.philips.com/support

BT50

BT25

User manual

Always there to help you

Question?

Contact

Philips

1EN

Contents

1 Important 2

2 Your portable speaker 3

Introduction 3

What's in the box 3

Overview of the speaker 3

3 Get started 4

Charge the built-in battery 4

Turn on/off 4

4 Play from Bluetooth devices 5

Connect a device 5

Disconnect a device 5

Reconnect a device 6

5 Play from external devices 7

6 Product information 8

Amplier 8

Speaker 8

Bluetooth 8

General information 8

7 Troubleshooting 9

General 9

About Bluetooth device 9

8 Notice 10

Compliance 10

Care of the environment 10

Trademark notice 10

2EN

1 Important

Warning

• Never remove the casing of this product.

• Never lubricate any part of this product.

• Never place this product on other electrical equipment.

• Keep this product away from direct sunlight, naked

amesorheat.

• Read these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or

otherapparatus(includingampliers)that

produce heat.

• Onlyuseattachments/accessoriesspecied

by the manufacturer.

• Referallservicingtoqualiedservice

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

• The battery shall not be exposed to

excessiveheatsuchassunshine,reorthe

like.

• Apparatus shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

apparatus(e.g.liquidlledobjects,lighted

candles).

Note

• The type plate is located on the bottom of the

apparatus.

3EN

2 Your portable

speaker

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this speaker, you can enjoy audio from

Bluetooth-enabled devices or other external

devices.

What's in the box

Check and identify the contents of your

package:

• Speaker

• USB cable for charging

• Short user manual

• Safety&noticeleaet

Overview of the speaker

a LED indicator

• Indicate battery or Bluetooth

connection status.

b Source selector (OFF/AUDIO IN/ )

• Select Bluetooth or AUDIO IN source.

• Turn the speaker off.

c PAIRING

• Enter Bluetooth pairing mode.

• Disconnect Bluetooth connection.

d DC IN

• Recharge the built-in battery.

e AUDIO IN

• Connect an external audio device.

4EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Charge the built-in battery

The speaker is powered by a built-in

rechargeable battery.

Note

• Before use, fully charge the built-in battery.

• The micro USB socket is for charging only.

• It takes you approximately two hours to fully charge

the battery.

• Rechargeable battery has a limited number of charge

cycles. Battery life and number of charge cycles vary by

use and settings.

Connect the USB cable between

• the DC IN socket on the speaker, and

• a USB socket on a computer.

The LED indicator indicates the battery status.

Under charging Fully charged

"OFF"

mode

Flashing white Off

"AUDIO

IN" mode

Flashing white Solid white

"Bluetooth"

mode

Flashing blue

or solid blue

(depending

on Bluetooth

connection

status)

Flashing blue

or solid blue

(depending

on Bluetooth

connection

status)

Turn on/off

• To turn the speaker on, slide the source

selector to AUDIO IN or .

• To turn the speaker off, slide the source

selector to OFF.

Switch to standby mode

The speaker switches to standby mode

automatically in the following situations:

• In Bluetooth mode, the connection with

Bluetooth device is invalid for 15 minutes;

• In AUDIO IN mode, no audio input cable

is connected for 15 minutes.

5EN

4 Play from

Bluetooth

devices

With this speaker, you can listen to audio from

Bluetooth-enabled devices.

Note

• The speaker can memorize a maximum of four paired

devices.Thefthpaireddevicewillreplacetherstone.

• Any obstacle between this speaker and a Bluetooth

device can reduce the operational range.

• Keep away from any other electronic device that may

cause interference.

• The operational range between this speaker and a

Bluetoothdeviceisapproximately10meters(30feet).

• Make sure that no audio input cable is connected to

the AUDIO IN socket.

Connect a device

1 Slide the source selector to .

» TheLEDindicatorashesblue.

2 On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

that can be paired (refer to the user

manualofthedevice).

3 Select [Philips BT50] or [Philips BT25]

displayed on your device for pairing and

connection. If necessary, input “0000” as

the pairing password.

» After successful pairing and connection,

the speaker beeps twice, and the LED

indicator turns solid blue.

• Ifyoucannotnd[Philips BT50] or

[Philips BT25] on your device, press

and hold PAIRING for more than

three seconds until you hear triple

beeps.

4 Play audio on the Bluetooth device.

Tip

• You can use your Bluetooth device to control play.

LED indicator (blue)

Indicator Bluetooth connection status

Fastashing(2Hz) Pairing

Slowashing(1Hz) Connecting

Solid blue Connected

Disconnect a device

• Press and hold PAIRING for more than

three seconds;

» The speaker beeps for three times.

• Disable Bluetooth on your device; or

• Move the device beyond the

communication range.

» The speaker beeps twice, and the LED

indicatorashesblue.

Note

• Before connecting another Bluetooth device, disconnect

thecurrentdevicerst.

6EN

Reconnect a device

When you turn on the speaker, it will reconnect

the last connected device automatically; If not,

select [Philips BT50] or [Philips BT25] on your

Bluetooth device to start connection.

7EN

5 Play from

external devices

With this speaker, you can also listen to an

external audio device such as an MP3 player.

Note

• Make sure that music playback through Bluetooth is

stopped.

1 Connect an audio input cable (not

supplied)witha3.5mmconnectoron

both ends to

• the AUDIO IN socket on this speaker,

and

• the headphone socket on the external

device.

2 Slide the source selector to AUDIO IN.

» The LED indicator turns white.

3 Play audio on the external device (refer to

itsusermanual).

8EN

6 Product

information

Note

• Product information is subject to change without prior

notice.

Amplier

Rated Output Power 2W RMS

Frequency Response 100 -16000 Hz, ±3dB

Signal to Noise Ratio > 70 dBA

Audio-in Input 300mV(typical)–

1600mV(Max.)RMS

Speaker

Speaker Impedance 4 ohm

Speaker Driver 4cm full range

Sensitivity >82dB/m/W± 3dB/

m/W

Bluetooth

Bluetooth Version V2.1 + EDR

Bluetoothprole A2DP

Frequency band/Output

power

2.400GHz -

2.483GHz ISM Band

/≤4dBm(Class2)

Bluetooth Range 10m(Freespace)

General information

Power Supply (through

microUSBsocket)

5 V, 0.5 A

Built-in Li-polymer

Battery

3.7 V, 365 mAh

Dimensions - Main Unit

(WxHxD)

61 x 76 x 61 mm

Weight - Main Unit 0.1 kg

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Intervenants

Philips

Philips TANX20 Manuel utilisateur

Philips

Philips SBM110 Manuel utilisateur

Philips

Philips SPA4355 Manuel utilisateur

Philips

Philips HTL3140B/79 Manuel utilisateur

Philips

Philips fidelio b8 Manuel utilisateur

Philips

Philips BT3500 Fiche d'information produit

Philips

Philips GS26G/05 Fiche d'information produit

Philips

Philips HTL5120 Manuel utilisateur

Philips

Philips HTL1170B Mode d’emploi

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips AD7000W/37 Manuel utilisateur

Philips

Philips SBT75RED/37 Manuel utilisateur

Philips

Philips TAS4807 Manuel utilisateur

Philips

Philips TAB7305 Manuel utilisateur

Philips

Philips Fidelio HTL7180 Manuel utilisateur

Philips

Philips BLAST BT Manuel utilisateur

Philips

Philips NTX800 Manuel utilisateur

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips HTL1030 Manuel utilisateur

Philips

Philips BT3500 Fiche d'information produit

Philips

Philips CSP251/00 Manuel utilisateur

Philips

Philips HTL2163B Manuel utilisateur

Philips

Philips HTL2153B Manuel utilisateur

Philips

Philips BT2500 Fiche d'information produit

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur