Philips 6000 Series Manuel utilisateur

www.philips.com/support

User manual

6000 series

TAB6305

English

Contents

1 Important 2

Help and support 2

Safety 2

Care for your product 3

Care of the environment 3

Caution FCC and IC statement for

Users (USA and Canada only) 4

Compliance 4

What’s in the Box 5

2 Your Soundbar 6

Main unit 6

Connectors 6

Wireless subwoofer 7

Remote control 7

Prepare the Remote Control 8

Placement 8

3 Connect 9

Connect to HDMI ARC Socket 9

Connect to Optical Socket 9

Connect to AUX Socket 9

Connect the IR pass-through cable 10

Connect to Power 10

Pair up with the subwoofer 11

4 Use your Soundbar 12

Turn ON and OFF 12

Select Modes 12

Select Equalizer (EQ) Eect 12

Adjust theVolume 13

Bluetooth Operation 13

AUX / OPTICAL / HDMI ARC Operation14

USB Operation 14

5 Wall mount 15

6 Product speciﬁcations 16

7 Troubleshooting 17

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Help and support

For extensive online support, visit

www.philips.com/support to:

•download the user manual and the quick

start guide

•watch video tutorials (available only for

selected models)

•ﬁnd answers to frequently answered

questions (FAQs)

•email us a question

•chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product.You can ﬁnd this information on the

back or bottom of your product.

Safety

Risk of electric shock or ﬁre!

•Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

•Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

near naked ﬂames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Battery (battery pack or batteries installed)

shall not be exposed to excessive heat such

as sunshine, ﬁre or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Risk of short circuit or ﬁre!

• For identiﬁcation and supply ratings, see

the type plate at the back or bottom of the

product.

•Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is dierent.

Risk of injury or damage to this product!

• For wall mounting, this product must be

securely attached to the wall in accordance

with the installation instructions. Use

only the supplied wall mount bracket (if

available). Improper wall mounting may

result in accident, injury or damage. If you

have any query, contact Consumer Care in

your country.

•Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

English

Risk of overheating!

•Never install this product in a conﬁned

space.Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Risk of contamination!

•Do not mix batteries (old and new or

carbon and alkaine, etc.).

• CAUTION: Danger of explosion if

batteries are incorrectly replaced. Replace

only with the same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

Risk of swallowing batteries!

•The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double insulation,

and no protective earth provided.

Care for your product

Use only microﬁber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured with

high quality materials and components, which

can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see battery

installation section.

Caution FCC and IC

statement for Users

(USA and Canada only)

FCC INFORMATION

Warning:

•This equipment should be installed and

operated with minimum distance 20cm

between the radiator & your body.

•Changes or modiﬁcations to this unit not

expressly approved by the party responsible

for compliance could void the user’s authority

to operate the equipment. ”

NOTE: This equipment has been tested

and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of

the FCC Rules.These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

•Reorient or relocate the receiving

antenna.

•Increase the separation between the

equipment and receiver.

•Connect the equipment into an outlet on

a circuit dierent from that to which the

receiver is connected.

•Consult the dealer or an experienced

radio /TV technician for help.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference,

including interference that may cause

undesired operation of the device.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby,TPVision Europe B.V. declares that this

product is in compliance with the essential

requirements and other relevant provisions of

Directive 2014/53/EU.

You can ﬁnd the Declaration of Conformity on

www.p4c.philips.com.

English

What’s in the Box

Check and identify the items in the package:

• Soundbar x 1

• Wireless Subwoofer x 1

• Remote Control x 1

(AAA Batteries x 2)

• Power Cord (for Subwoofer) x 3

• DC Adapter (for Soundbar) x 3

• IR pass-through Cable x 1

• IR Bracket x 1

• Wall Mount kit x 1

(Wall Brackets x2, Screws x2, Dowels x2)

• Quick Start Guide / Warranty Card /

Safety Sheet x 1

Wireless Subwoofer Remote Control

(AAA Batteries x 2)

Power Cord *

(for subwoofer)

DC adapter *

IR pass-through

Cable

IR Bracket Wall Bracket

Gum Cover

Screws (for wall)

Quick start guide

Warranty Card

Safety Sheet

* Power cord quantity and plug type vary by regions.

2 Your Soundbar

Congratulations on your purchase, and welcome

to Philips!To fully beneﬁt from the support

that Philips oers, register your Soundbar at

www.philips.com/support.

Main unit

This section includes an overview of the main

unit.

Remote Control Sensor

Soundbar’s LED indicator

Switch the playback source and the front

indicator lights up accordingly.You may

refer to the text on the right for the

corresponding source.

Status LED State

Standby [Standby] Solid red

AUX [AUX/USB] Solid white

USB [AUX/USB] Blinking white

BT (Bluetooth)

• Connected

• Connection

[BT] Solid white

[BT] Blinking white

OPTICAL [OPTICAL] Solid white

HDMI ARC [HDMI ARC] Solid white

(Standby-On)

Switch the Soundbar On or to Standby.

(Source)

Select an input source for the Soundbar.

+/- (Volume)

Increase or decrease volume.

Connectors

This section includes an overview of the

connectors available on your Soundbar.

DC 24V

Connect to adapter.

USB

• Audio input from a USB storage device.

• Upgrade software of this product.

AUX

Audio input from, for example, an

MP3 player (3.5mm jack).

IR OUT

IR pass-through cable connector.

OPTICAL

Connect to an optical audio output on the

TV or a digital device.

HDMI ARC

Connect to the HDMI input on the TV.

Wall Bracket Screws

English

Wireless subwoofer

This section includes an overview of the

Wireless subwoofer.

abc

AC~ Socket

Connect to the power supply.

Pair button

Press and hold to enter the pairing mode

for the subwoofer.

Subwoofer indicator

Determine the status based on the wireless

subwoofer indicator.

LED State Status

Fast blink Subwoofer in pairing mode

Constant on Connected / Pairing successful

Slow blink Connection / Pairing Failed

Remote control

This section includes an overview of the remote

control.

(Standby-On)

Switch the Soundbar on or to standby.

Source buttons

AUX: Switch your audio source to the

AUX connection (3.5mm jack).

BT / Pair: Switch to Bluetooth mode.

Press and hold to activate the pairing

function in Bluetooth mode or disconnect

the existing paired Bluetooth device.

OPTICAL: Switch your audio source to

the optical connection.

HDMI ARC: Switch your source to HDMI

ARC connection.

USB: Switch to USB mode.

+/- (Soundbar’s Volume)

Increase / decrease the soundbar’s volume.

Select Equalizer (EQ) eect.

/ (Previous/Next)

Skip to the previous or next track in USB/

BT mode.

(Play/Pause)

Start, pause or resume play in USB/BT mode.

(Mute)

Mute or restore volume.

+/- (Subwoofer’s Volume)

Increase / decrease the subwoofer’s volume.

Prepare the Remote

Control

•The provided Remote Control allows the

unit to be operated from a distance.

•Even if the Remote Control is operated

within the eective range 19.7 feet

(6m), remote control operation may

be impossible if there are any obstacles

between the unit and the remote control.

•If the Remote Control is operated near

other products which generate infrared

rays, or if other remote control devices

using infra-red rays are used near the unit,

it may operate incorrectly. Conversely, the

other products may operate incorrectly.

Replace the Remote Control

Battery

1 Press and slide the back cover to open

the battery compartment of the remote

control.

2 Insert two AAA size batteries (included).

Make sure the (+) and (–) ends of the

batteries match the (+) and (–) ends

indicated in the battery compartment.

3 Close the battery compartment cover.

Precautions Concerning

Batteries

•Be sure to insert the batteries with correct

positive “ ” and negative “ ” polarities.

•Use batteries of the same type. Never use

different types of batteries together.

•Either rechargeable or non-rechargeable

batteries can be used. Refer to the

precautions on their labels.

•Be aware of your fingernails when removing

the battery cover and the battery.

•Do not drop the remote control.

•Do not allow anything to impact the

remote control.

•Do not spill water or any liquid on the

remote control.

•Do not place the remote control on a wet

object.

•Do not place the remote control under

direct sunlight or near sources of excessive

heat.

•Remove the battery from the remote

control when not in use for a long period

of time, as corrosion or battery leakage

may occur and result in physical injury, and/

or property damage, and/or fire.

•Do not use any batteries other than those

specified.

•Do not mix new batteries with old ones.

•Never recharge a battery unless it is

confirmed to be a rechargeable type.

Placement

Place the subwoofer at least 1 meter (3 feet)

away from your Soundbar, and ten centimeters

away from the wall.

For best results, place your subwoofer as shown

below.

10 cm/4"

1 m/3 ft

Autres manuels pour 6000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips RH567 Manuel utilisateur

Philips

Philips HTL6140B Manuel utilisateur

Philips

Philips Fidelio DS6800W Manuel utilisateur

Philips

Philips MMS460 - MMS 460 5.1-CH PC Multimedia Home Theater Speaker... Manuel utilisateur

Philips

Philips TAB4208 Manuel utilisateur

Philips

Philips HTL3160B Manuel utilisateur

Philips

Philips HTL1190B/96 Manuel utilisateur

Philips

Philips HTL2193B Manuel utilisateur

Philips

Philips SPA4355/37 Manuel utilisateur

Philips

Philips amBX SGC6101BD Manuel utilisateur

Philips

Philips HTS3111/05 Manuel utilisateur

Philips

Philips TAB8505 Manuel utilisateur

Philips

Philips 8000 Series Manuel utilisateur

Philips

Philips TAB8405 Manuel utilisateur

Philips

Philips HTL2193B Manuel utilisateur

Philips

Philips A3.610/05 Guide de référence

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips HTL1193B/98 Manuel utilisateur

Philips

Philips A 2.300 Compact Power Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Philips

Philips HTL1180B/96 Manuel utilisateur

Philips

Philips Fidelio HTL7180 Manuel utilisateur

Philips

Philips Fidelio CSS7235Y Manuel utilisateur

Philips

Philips Fidelio Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur