Philips HTL2111A/61 Manuel utilisateur

HTL2111A

www.philips.com/support

User manual

Always there to help you

Question?

Contact

Philips

1EN

Contents

1 Important 2

Help and support 2

Safety 2

Care for your product 3

Care of the environment 3

2 Your SoundBar 3

Main unit 3

Remote control 4

Connectors 4

3 Connect 5

Placement 5

Connect audio from TV and other devices 6

4 Use your SoundBar 7

Adjust the volume 7

Choose your sound 7

MP3 player 7

USB storage devices 7

Play audio through Bluetooth 8

Apply factory settings 8

Update software 8

5 Wall mount 9

6 Productspecications 9

7 Troubleshooting 10

2EN

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• ndanswerstofrequentlyanswered

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product.Youcanndthisinformationonthe

back or bottom of your product.

Safety

Riskofelectricshockorre!

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

nearnakedamesorotherheatsources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothisproduct!

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of glass.

Handle with care to avoid injury and damage.

Riskofoverheating!

• Neverinstallthisproductinaconned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• Danger of explosion if batteries are

incorrectly replaced. Replace only with the

same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

3EN

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

Useonlymicroberclothtocleantheproduct.

Care of the environment

Disposal of your old product

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Do not throw away the product with the

normal household waste at the end of its life,

buthanditinatanofcialcollectionpointor

recycling. By doing this, you help to preserve the

environment.

2 Your SoundBar

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfrom

the support that Philips offers, register your

SoundBar at www.philips.com/welcome.

Main unit

This section includes an overview of the main

unit.

a SURR indicator

Lights up when you selectVirtual Surround

sound.

b Source indicators

• OPTICAL: Lights up when you switch

to optical input source.

• AUX: Lights up when you switch to

analog input source.

• COAXIAL / AUDIO IN

Lights up when you switch to coaxial

input source.

Lights up when you switch to audio

input source (3.5mm jack).

• Bluetooth

Lights up when you switch to

Bluetooth mode and Bluetooth devices

are paired.

Blinks when you switch to Bluetooth

mode and Bluetooth devices are not

paired.

4EN

Remote control

This section includes an overview of the

remote control.

a (Standby-On)

Switch the SoundBar on or to standby.

b Source buttons

• AUX: Switch your audio source to the

AUX connection.

• USB: Switch your audio source to the

USB connection.

• COAX: Switch your audio source to

the coaxial connection.

• AUDIO-IN: Switch your audio source

to audio in connection.

• Bluetooth: Switch to Bluetooth mode.

• OPTICAL: Switch your audio source

to the optical connection.

Start or resume play.

Pause play.

e /

Skip to the previous or next track in USB

mode.

Mute or restore volume.

g BASS +/-

Increase or decrease bass.

h VOLUME +/-

Increase or decrease volume.

i SURR OFF/ON

Turn off or on the virtual surround sound.

j TREBLE +/-

Increase or decrease treble.

Connectors

This section includes an overview of the

connectors available on your SoundBar.

Side right

a (USB)

Audio input from a USB storage device.

b AUDIO IN

Audio input from an MP3 player (3.5mm

jack).

a b

5EN

Rear connectors

a AUDIO IN-AUX

Connect to an analog audio output on the

TV or an analog device.

b DIGITAL IN-OPTICAL

Connect to an optical audio output on the

TV or a digital device.

c DIGITAL IN-COAXIAL

Connect to a coaxial audio output on the

TV or a digital device.

d AC MAINS~

Connect to the power supply.

bac d

3 Connect

This section helps you connect your SoundBar

to a TV and other devices.

For information about the basic connections of

your SoundBar and accessories, see the quick

start guide.

Note

•Foridenticationandsupplyratings,refertothetype

plate at the back or bottom of the product.

•Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Placement

Place your Soundbar as shown below.

6EN

Connect audio from TV and

other devices

Play audio fromTV or other devices through

your Soundbar.

Use the best quality connection available on

yourTV and other devices.

Option 1: Connect audio through a

digital optical cable

Best quality audio

1 Using an optical cable, connect the

OPTICAL connector on your SoundBar to

the OPTICAL OUT connector on the TV

or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a

digital coaxial cable

Good quality audio

1 Using a coaxial cable, connect the

COAXIAL connector on your SoundBar

to the COAXIAL/DIGITAL OUT

connector on the TV or other device.

• The digital coaxial connector might be

labeled DIGITAL AUDIO OUT.

Option 3: Connect audio through

analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your SoundBar to the

AUDIO OUT connectors on the TV or

other device.

DVD

7EN

4 Use your

SoundBar

This section helps you use the SoundBar to play

audio from connected devices.

Before you start

• Make the necessary connections

described in the Quick Start Guide

or download the User Manual from

www.philips.com/support.

• Switch the SoundBar to the correct source

for other devices.

Adjust the volume

1 Press VOLUME +/- to increase or

decrease a volume level.

• To mute sound, press (MUTE).

• To restore the sound, press (MUTE)

again or press VOLUME +/-.

» All Source indicators on the main unit

blink twice when a volume is set to the

maximum or minimum value.

Choose your sound

This section helps you choose the ideal sound

for your video or music.

Surround sound mode

Experience an immersive audio experience with

surround sound modes.

1 Press SURR OFF/ON to turn surround

mode on or off.

• On: Create a surround listening

experience.

• Off:Two-channel stereo sound. Ideal

for listening to music.

Equalizer

Change the high frequency (treble) and low

frequency (bass) settings of the SoundBar.

1 Press TREBLE +/- or BASS +/- to change

the frequency.

» All Source indicators on the main unit

blink twice when treble or bass is set

to the maximum or minimum value.

MP3 player

Connect your MP3 player to play your audio

lesormusic.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable,

connect the MP3 player to the AUDIO IN

connector on your SoundBar.

2 Press AUDIO-IN.

3 Press the buttons on the MP3 player to

selectandplayaudiolesormusic.

USB storage devices

Enjoy audio on a USB storage device, such as an

MP3playerandUSBashmemory,etc.

What you need

• A USB storage device that is formatted

forFATlesystems,andcomplieswiththe

Mass Storage Class.

• AnMP3orWMAleonaUSBstorage

device

1 Connect a USB storage device to the

SoundBar.

2 Press USB on the remote control.

3 Use the remote control to control play.

8EN

Button Action

Start or resume play.

Pause play.

/ Skip to the previous or next track.

Note

•This product may not be compatible with certain types

of USB storage device.

•If you use a USB extension cable, USB HUB, or USB

multi-reader, the USB storage device may not be

recognized.

•Digital camera PTP protocols are not supported.

•Do not remove the USB storage device while it is

being read.

•DRM-protectedmusicles(MP3,WMA)arenot

supported.

•Support a USB port: 5V , 500mA.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with

your Bluetooth device (such as an iPad, iPhone,

iPod touch, Android phone, or laptop), and then

youcanlistentotheaudiolesstoredonthe

device through your SoundBar speakers.

What you need

• A Bluetooth device which supports

BluetoothproleA2DP,andwithBluetooth

version as 2.1 + EDR.

• The operational range between the

SoundBar and a Bluetooth device is

approximately 10 meters (30 feet).

1 Press Bluetooth on the remote control

to switch the SoundBar to Bluetooth

mode.

» The Bluetooth indicator blinks at a fast

rate.

2 On the Bluetooth device, switch on

Bluetooth, search for and select PHILIPS

HTL2111A to start connection (see the

user manual of the Bluetooth device on

how to enable Bluetooth).

• When prompted for a password, enter

"0000".

» During connection, the Bluetooth

indicator blinks at a lower rate.

3 Wait until the Bluetooth lights up.

» If the connection fails, the Bluetooth

indicator blinks continually at a lower

rate.

4 Selectandplayaudiolesormusicon

your Bluetooth device.

• During play, if a call is coming, music

play is paused. Play resumes when the

call ends.

5 To exit Bluetooth, select other source.

• When your switch back to Bluetooth

mode, Bluetooth connection remains

active.

Note

•The music streaming may be interrupted by obstacles

between the device and SoundBar, such as wall, metallic

casing that covers the device, or other devices nearby

that operate in the same frequency.

•If you want to connect your SoundBar with another

Bluetooth device, disable the currently connected

Bluetooth device.

Apply factory settings

You can reset your SoundBar to the default

setting mode.

1 In mute mode, quickly press AUX twice.

» The factory settings is restored.

Update software

To continually improve the product, software

upgrade may be offered.Visit ww.philips.com/

support to check if the latest software version

is available.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips 6000 Series Manuel utilisateur

Philips

Philips css2133b Manuel utilisateur

Philips

Philips MMS222/00 Guide de référence

Philips

Philips HTL2183B/12 Manuel utilisateur

Philips

Philips MMS460 - MMS 460 5.1-CH PC Multimedia Home Theater Speaker... Manuel utilisateur

Philips

Philips Fidelio FB1 Manuel utilisateur

Philips

Philips htl1193b Manuel utilisateur

Philips

Philips HTL2193B/98 Manuel utilisateur

Philips

Philips SBCBC730/00 Manuel utilisateur

Philips

Philips HTL3160S Manuel utilisateur

Philips

Philips HTL3110B/12 Manuel utilisateur

Philips

Philips FWD876 Manuel utilisateur

Philips

Philips HTS5110 Manuel utilisateur

Philips

Philips NTX600 Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Philips

Philips 7000 series Manuel utilisateur

Philips

Philips SPA8000B Manuel utilisateur

Philips

Philips HTL2100/77 Manuel utilisateur

Philips

Philips HTL6140S Manuel utilisateur

Philips

Philips A5.600 Manuel utilisateur

Philips

Philips SPA4270BT Manuel utilisateur

Philips

Philips A5.600 Seismic Power 600/MMS 506 Manuel utilisateur

Philips

Philips TAB8805 Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur