Philips HTL1190B/96 Manuel utilisateur

HTL1190B

www.philips.com/support

User manual

Always there to help you

Question?

Contact

Philips

1EN

Contents

1 Important 2

Help and support 2

Safety 2

Care for your product 3

Care of the environment 3

2 Your SoundBar 4

Main unit 4

Remote control 4

Connectors 5

3 Connect 6

Placement 6

Connect audio from TV and other devices 6

4 Use your SoundBar 7

Adjust the volume 7

Choose your sound 7

MP3 player 8

USB storage devices 9

Play audio through Bluetooth 9

Auto standby 10

Apply factory settings 10

Update software 10

5 Wall mount 10

6 Productspecications 11

7 Troubleshooting 12

2EN

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• nd answers to frequently answered

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

Safety

Riskofelectricshockorre!

• Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Batteries (battery pack or batteries

installed) shall not be exposed to excessive

heat such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• For identication and supply ratings, see

the type plate at the back or bottom of

the product.

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothisproduct!

• For wall mounting, this product must be

securely attached to the wall in accordance

with the installation instructions. Use

only the supplied wall mount bracket (if

available). Improper wall mounting may

result in accident, injury or damage. If you

have any query, contact Consumer Care in

your country.

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

3EN

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• Danger of explosion if batteries are

incorrectly replaced. Replace only with the

same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

Do not throw away the product with the

normal household waste at the end of its life,

but hand it in at an ofcial collection point or

recycling. By doing this, you help to preserve the

environment.

4EN

2 Your SoundBar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your

SoundBar at www.philips.com/welcome.

Main unit

This section includes an overview of the main

unit.

Switch the SoundBar on or to standby.

b SOURCE

Select an input source for the SoundBar.

c Volume+/-

Increase or decrease volume.

d LED indicators

• STANDBY: Lights up when the

SoundBar is in standby.

• COAXIAL: Lights up when you switch

to coaxial input source.

• OPTICAL: Lights up when you switch

to optical input source.

• AUX: Lights up when you switch to

analog input source.

ab c d

• AUDIO IN: Lights up when you switch

to audio input source (3.5mm jack).

• USB: Lights up you switch to USB

source.

•

Lights up when you switch to

Bluetooth mode and Bluetooth devices

are paired.

Blinks when you switch to Bluetooth

mode and Bluetooth devices are not

paired.

Remote control

This section includes an overview of the

remote control.

a (Standby-On)

Switch the SoundBar on or to standby.

b Source buttons

• COAX: Switch your audio source to

the coaxial connection.

5EN

• OPT: Switch your audio source to the

optical connection.

• AUX: Switch your audio source to the

AUX connection.

• AUDIO IN: Switch your audio source

to the MP3 connection (3.5mm jack).

• : Switch to Bluetooth mode.

• USB: Switch your audio source to the

USB connection.

c +/- (Volume)

• Increase or decrease volume.

Mute or restore volume.

e BASS +/-

Increase or decrease bass.

f NIGHT

Turn night mode on or off.

g TREBLE +/-

Increase or decrease treble.

h SURR

Toggle between stereo and virtual

surround sound.Virtual surround is

applicable for the audio codecs, such as

MP3, PCM and MPEG (except Dolby

Digital).

i AUDIO SYNC +/-

Applicable to COAXIAL (COAX) and

OPTICAL (OPT) sources only. Increase or

decrease audio delay.

j Play buttons

• : Play, pause or resume play in USB

mode and Bluetooth mode (only for

AVRCP-supported Bluetooth devices).

• / : Skip to the previous or next

track in USB mode and Bluetooth

mode (only for AVRCP-supported

Bluetooth devices).

Connectors

This section includes an overview of the

connectors available on your SoundBar.

a DIGITAL IN-OPTICAL

Connect to an optical audio output on the

TV or a digital device.

b AUX

Connect to an analog audio output on the

TV or an analog device.

c COAXIAL

Connect to a coaxial audio output on the

TV or a digital device.

Audio input from a USB storage device.

e AUDIO IN

Audio input from, for example, an

MP3 player (3.5mm jack).

f AC MAINS~

Connect to the power supply.

6EN

3 Connect

This section helps you connect your SoundBar

to a TV and other devices.

For information about the basic connections of

your SoundBar and accessories, see the quick

start guide.

Note

• For identication and supply ratings, refer to the type

plate at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Placement

Place your Soundbar as shown below.

Connect audio from TV and

other devices

Play audio fromTV or other devices through

your Soundbar.

Use the best quality connection available on

yourTV and other devices.

Option 1: Connect audio through a

digital optical cable

Best quality audio

1 Using an optical cable, connect the

OPTICAL connector on your SoundBar to

the OPTICAL OUT connector on the TV

or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a

digital coaxial cable

Best quality audio

1 Using a coaxial cable, connect the

COAXIAL connector on your SoundBar

to the COAXIAL/DIGITAL OUT

connector on the TV or other device.

• The digital coaxial connector might be

labeled DIGITAL AUDIO OUT.

7EN

Option 3: Connect audio through

analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your SoundBar to the

AUDIO OUT connectors on the TV or

other device.

DVD

4 Use your

SoundBar

This section helps you use the SoundBar to play

audio from connected devices.

Before you start

• Make the necessary connections

described in the Quick Start Guide

or download the User Manual from

www.philips.com/support.

• Switch the SoundBar to the correct source

for other devices.

Adjust the volume

1 Press +/- (Volume) to increase or decrease

a volume level.

• To mute sound, press .

• To restore the sound, press again or

press +/- (Volume).

Volume indicator

• The higher volume level you change to, the

more LED indicators light up. If you do not

press the volume button for three seconds,

the volume indicators light off.

• All the LED indicators blink three

times when a volume level is set to the

maximum or minimum.

• When sound is muted, the current source

indicator blinks.

Choose your sound

This section helps you choose the ideal sound

for your video or music.

Surround sound mode

Experience an immersive audio experience with

surround sound modes.

8EN

1 Press SURR to turn surround mode on

or off.

• On: Create a surround listening

experience.

• Off:Two-channel stereo sound. Ideal

for listening to music.

Sound mode indicator

• If surround mode is turned on, all the LED

indicators light up one by one, with all the

LED indicators on for three seconds. Finally

the current source indicator stays on.

• If surround mode is turned off, all the LED

indicators light up, then light off one by

one. Finally the current source indicator

stays on.

Note

• Virtual surround is applicable for the audio codecs, such

as MP3, PCM and MPEG (except Dolby Digital).

Equalizer

Change the high frequency (treble) and low

frequency (bass) settings of the SoundBar.

1 Press TREBLE +/- or BASS +/- to change

the treble or bass.

Treble/bass indicator

• The more treble/bass you change to, the

more LED indicators light up. If you do

not press the treble/bass button for three

seconds, the treble/bass indicators light off.

• All the LED indicators blink three times

when treble or bass is set to the maximum

or minimum value.

Synchronize video and sound

If the audio and video are not synchronized,

delay the audio to match the video.

1 Press AUDIO SYNC +/- to synchronize

the audio with the video.

• AUDIO SYNC + increases the sound

delay, and AUDIO SYNC - decreases

the sound delay.

Sound delay indicator

• The more delay you change to, the more

LED indicators light up. If you do not press

the sound delay button for three seconds,

the sound delay indicators light off.

Note

• This feature is only applicable to COAXIAL (COAX)

and OPTICAL (OPT) sources.

Night mode

For quiet listening, night mode decreases the

volume of loud sounds when audio is played.

Night mode is only available for Dolby Digital

soundtracks.

1 Press NIGHT to turn night mode on or

off.

Night mode indicator

• If night mode is turned on, all the LED

indicators light up one by one, with all the

LED indicators on for three seconds. Finally

the current source indicator stays on.

• If night mode is turned off, all the LED

indicators light up, then light off one by

one. Finally the current source indicator

stays on.

MP3 player

Connect your MP3 player to play your audio

les or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable,

connect the MP3 player to the AUDIO IN

connector on your SoundBar.

2 Press AUDIO IN on the remote control.

3 Press the buttons on the MP3 player to

select and play audio les or music.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips HTL2111A Manuel utilisateur

Philips

Philips CSS5530B Manuel utilisateur

Philips

Philips 4000 series Manuel utilisateur

Philips

Philips audio players Manuel utilisateur

Philips

Philips HTL3140B/51 Manuel utilisateur

Philips

Philips HTL3110B Manuel utilisateur

Philips

Philips HTB3520X Manuel utilisateur

Philips

Philips FB206W/01 Manuel utilisateur

Philips

Philips TAB8507B/10 Manuel utilisateur

Philips

Philips FB209W Manuel utilisateur

Philips

Philips MMS460 - MMS 460 5.1-CH PC Multimedia Home Theater Speaker... Manuel utilisateur

Philips

Philips SPA1312 Manuel utilisateur

Philips

Philips MMS 430 Manuel utilisateur

Philips

Philips SGC5101BD/27 Manuel utilisateur

Philips

Philips Active Speaker System Manuel utilisateur

Philips

Philips HTL1193B/98 Manuel utilisateur

Philips

Philips FWM185/05 Manuel utilisateur

Philips

Philips everplay BT6900 Manuel utilisateur

Philips

Philips HTL2100/77 Manuel utilisateur

Philips

Philips Fidelio Manuel utilisateur

Philips

Philips HTL2101B Manuel utilisateur

Philips

Philips HTL3120/77 Manuel utilisateur

Philips

Philips DS7550 Manuel utilisateur

Philips

Philips HTL6140S Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur