Philips SRU 5010/87 Manuel utilisateur

SRU 5010/87

Instructions for use 4

Instruzioni per l'uso 10

Instrucciones

de manejo 16

Manual de utilização 22

Od  28

Инструкции по

использованию 34

Návod k použití 40

Instrukcja obsługi 46

Quick, Clean & Easy Setup

www.philips.com/urc

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Restoring the original functions of your remote control . . . . . . . . . . . . . 8

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 52-60

Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

1. Introduction

Congratulations on your purchase of the Philips SRU 5010 universal remote

control. After installing the remote control it can operate the most-used

functions of almost any brand of TV.

You can find information about how to prepare this remote control for use in

the chapter ‘Installing the remote control’.

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in

the direction of the arrow.

2Place two AAA type batteries into the

battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Note: If the LED blinks four times after every key press, the remote control is indicating

that its batteries are running low. Replace the old batteries with two new AAA

batteries.

Testing the remote control

The remote control has been programmed to operate the most-used

functions of almost any brand of TV. Because the SRU 5010 may use different

signals for each make and even for different models of the same brand, it is

advisable to test whether your TV responds to the SRU 5010.

The example below instructs you how to do this.

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Check whether all the keys are working

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU 5010 is ready for use.

• If the TV does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Instructions for use

English

Instructions for use

English

Setting the remote control

This is only necessary if your TV does not respond to the SRU 5010.

If that is the case, the SRU 5010 does not recognize the brand and/or model

of your TV and you need to program the remote control to do so.

You can set the remote control either automatically or manually.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRU 5010 emits the ‘switch off TV’ signal for all models of TV that

are stored in the memory.

2Then keep keys 1 and 3 on the SRU 5010

pressed simultaneously for three seconds,

until the LED flashes twice and then remains

lit.

3Press and hold the Standby key

of the SRU 5010.

– The SRU 5010 now starts emitting all known

‘TV off’ signals, one by one.

Each time a code is sent, the LED

lights up

4When your TV switches off (stand-by), release

the Standby key of the SRU 5010 immediately.

– The SRU 5010 has now found a code that works on your TV.

5Check if you can operate all functions on your TV with the SRU 5010.

• If this is not the case, you can redo the automatic setting.

The SRU 5010 will then search for a code that works better.

– After the SRU 5010 has run through all the known codes,

the search will stop automatically and the LED will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

Manually setting the remote control

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the

code list at the back of this manual. One or

more four-figure codes are shown for each

brand. Note the first code.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

3Keep keys 1 and 3 pressed simultaneously

for three seconds until the LED

flashes twice and then remains lit

4Then enter the code noted in step 2 using the

digit keys.

– The LED will now flash twice and then remains lit.

The code has now been stored in the memory of the SRU 5010.

If the LED flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

5Point the SRU 5010 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRU 5010 is ready

for use. Do not forget to note your code.

• If the TV does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

Instructions for use

English

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby. . . . . . . . . switches the TV on or off.

2. . . - teletext on/off ( );

- text mix ( );

- text off ( );

- wide screen TV ( );

- enlarge ( );

- text hold ( ).

3MENU . . . . . . . . . . . . turns the menu on and off.

4Cursor keys. . . . . . . cursor up, down, left, right in a menu.

5A/V . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

6s. . . . . . . . . . . . . . . . . mutes the sound of the TV.

7- VOL + . . . . . . . . . . . adjusts the TV volume.

8Digit keys . . . . . . . . . direct choice of channels and other functions.

9SHIFT . . . . . . . . . . . . for extra functions. When pressed at the same

time as a second key, the second key will get

another function. All blue labelled keys can be used

together with SHIFT. For example:

SHIFT + INSTALLinstalls your TV

SHIFT + STORE . . stores TV settings

Try out other combinations with the SHIFT-key on your TV in order to find

out which functions are available.

Only functions featured on the original remote control are available.

0Red,green,yellow and blue teletext keys

!/. . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

@22. . . . . . . . . . . . . . . . selects previous programme/channel.

#- PROG + . . . . . . . . . selects a previous or following channel.

$OK . . . . . . . . . . . . . . . confirms your selection.

%BACK. . . . . . . . . . . . . jumps back one level in the menu or turns off the

menu.

^LED

• If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’. It is possible that you must enter another code for the

device.

Instructions for use

English

4. Extra possibilities

Adding a function to the remote control

If you want to add a function to the SRU 5010, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code

for the extra function.

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the SRU 5010

pressed simultaneously for three seconds,

until the LED flashes twice and then remains

lit.

2Press keys 9, 8 and 1, in that order

– The LED flashes twice.

All original functions have now been restored

and any extra functions have been deleted.

5. Troubleshooting

• Problem

– Solution

•

The LED blinks four times after every key press.

–

The remote control is indicating that its batteries are running low. Replace the old

batteries with two new

1.5 Volt,

AAA batteries.

• The TV does not respond and the LED does not flash when you press a

key.

– Replace the old batteries with two new 1.5 Volt,AAA batteries.

• The TV does not respond but the LED does flash when a key is pressed.

– Point the SRU 5010 at the device and make sure that there are no

obstructions between the SRU 5010 and the device.

• The SRU 5010 does not respond properly to commands.

– Maybe you are using the wrong code.Try programming the SRU 5010 again

using another code, which is mentioned under the brand of your device, or

reset for automatic search to find the right code.

If the TV still does not respond, call our helpline.

• The Teletext keys do not work.

– Find out whether your TV is equipped with Teletext.

• You have difficulties operating all of the functions on your device.

– Maybe the SRU 5010 has to be adapted to the model of the device.

Call our helpline for details.

• Your brand of device is not in the code list.

– Try to set the SRU 5010 automatically.

See ‘Automatically setting the remote control’.

• None of the codes works during manual setting of the remote control.

– If that is the case, follow the instructions under

‘Automatically setting the remote control’.

Instructions for use

English

6. Need help?

If you have any questions about the SRU 5010, you can always contact us.

You will find our contact details after the code list at the back of this manual.

Read this manual carefully before you make a call.You can solve most of the

problems yourself. If you cannot find any answers to your problems, write

down the details of your device shown in the code list at the back of this

manual.This will help our operators to assist you better and more quickly.

Look up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make sure

the device is to hand so that our operators can help you determine whether

your remote control is working properly.

The model number of your Philips universal remote control is SRU 5010/87.

Date of purchase: ......../......../........

(day/month/year)

Instructions for use

English

Instruzioni per l’uso

Italiano

Sommario

1. Introduzione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2. Installazione del telecomando . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12

Inserimento delle batterie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Collaudo del telecomando . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Configurazione del telecomando . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3. Tasti e funzioni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4. Funzioni aggiuntive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Aggiungere una funzione al telecomando . . . . . . . . . . . . . . . . . . . . . . . . 14

Ripristino delle funzioni originali del telecomando . . . . . . . . . . . . . . . . . 14

5. Risoluzione di problemi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6. Problemi? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Lista dei codici per tutte le marche / apparecchi . . . . . . . . . . . . . . . 52-60

Informazioni per il consumatore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

1. Introduzione

Congratulazioni per l’acquisto del telecomando universale Philips SRU 5010.

Dopo la configurazione, il telecomando potrà controllare le funzioni

maggiormente utilizzate dei TV di qualsiasi marca.

Nel capitolo ‘Installazione del telecomando’ troverete le informazioni

necessarie per preparare il telecomando all’uso.

2. Installazione del telecomando

Inserimento delle batterie

1Premete sul coperchio e fatelo scorrere

nella direzione della freccia.

2Inserite due batterie AAA nel vano batterie,

come illustrato.

3Richiudete il coperchio

(scatta in posizione con un clic).

Nota: Se il LED lampeggia quattro volte dopo ogni volta che si preme un tasto, il

telecomando indica che le batterie si stanno scaricando. Sostituite le batterie con

due nuove del tipo AAA.

Collaudo del telecomando

Il telecomando è stato programmato per controllare le funzioni maggiormente

utilizzate dei TV di qualsiasi marca. Poiché l’SRU 5010 potrebbe utilizzare

segnali differenti per ciascuna marca e modello, è opportuno verificare se il

TV risponde ai comandi inviati dall’SRU 5010. L’esempio che segue descrive la

procedura per il collaudo.

1Accendete il televisore direttamente o tramite il suo telecomando

originale. Sintonizzate il canale 1.

2Controllate se funzionano tutti i tasti.

Per una panoramica sui tasti e le relative

funzioni, consultate ‘3.Tasti e funzioni’.

– Se il TV risponde correttamente a tutti i

comandi abbinati ai tasti, l’SRU 5010 è pronto

per l’uso.

Instruzioni per l’uso

Italiano

• Se l’apparecchio non risponde del tutto od ignora alcuni

comandi, passate alle istruzioni descritte in ‘Configurazione del

telecomando’, oppure per l’impostazione in linea andate al sito:

www.philips.com/urc.

Configurazione del telecomando

Questa procedura va svolta solo se il TV non risponde ai comandi inviati

dall’SRU 5010. Se ciò accade significa che l’SRU 5010 non riconosce la marca

e/o il modello di TV ed è quindi necessario programmare il telecomando in

base alle specifiche dell’apparecchio. Potete programmare il telecomando sia

automaticamente che manualmente.

Impostazione automatica del telecomando

Il telecomando ora effettuerà la ricerca automatica del corretto codice per il

vostro apparecchio.

Assicuratevi che il TV sia acceso e selezionate un canale mediante il suo

telecomando originale, od i tasti del pannello del televisore (ad esempio il

canale 1). L’SRU 5010 procederà con l’invio del segnale di ‘spegnimento TV’

di tutti i modelli di televisore presenti nella sua memoria.

2Quindi tenete i tasti 1 e 3 sull’SRU 5010

premuti contemporaneamente per tre

secondi fino a quando il LED lampeggia due

volte e poi rimane acceso.

3Premete e tenete premuto il tasto

dell’SRU 5010.

– L’SRU 5010 inizia ad inviare tutti i segnali noti

di ‘spegnimento TV’, uno alla volta.

Ogni volta che viene inviato un codice, il LED

si illumina.

4Quando il televisore si spegne (standby),

rilasciate immediatamente il tasto standby del telecomando SRU 5010.

– L’SRU 5010 ha quindi trovato un codice adatto al vostro TV.

5Verificate se l’SRU 5010 è in grado di controllare tutte le funzioni del

televisore.

• Nel caso contrario, potete ripetere l’impostazione.

L’SRU 5010 quindi ricercherà un codice che funziona meglio.

– Quando l’SRU 5010 ha inviato tutti i codici noti, la ricerca si arresta

automaticamente ed il LED cessa di lampeggiare.

– La programmazione automatica di un TV richiede fino a 5 minuti.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Télécommande

Philips

Philips Perfect replacement SRC3036WM Manuel utilisateur

Philips

Philips 29PT8403/32 Manuel utilisateur

Philips

Philips Perfect replacement SRU5108/27 Guide de l'administrateur

Philips

Philips TV Remote Control Manuel utilisateur

Philips

Philips PMDVR8 Manuel utilisateur

Philips

Philips SRU5130/87 Manuel utilisateur

Philips

Philips Pronto TSU9200 Manuel utilisateur

Philips

Philips SRU 1010 Manuel utilisateur

Philips

Philips Pronto SBCRU930 Manuel utilisateur

Philips

Philips SBC RU 930 Instructions d'utilisation

Philips

Philips SRU 5170/86 Manuel utilisateur

Philips

Philips SRP9263C/27 Manuel utilisateur

Philips

Philips SRU7060/10 Manuel utilisateur

Philips

Philips SRU 740/10 Manuel utilisateur

Philips

Philips Prestigo SRU8015 Manuel utilisateur

Philips

Philips TSU500 Manuel utilisateur

Philips

Philips 22AV1125 Manuel utilisateur

Philips

Philips PM525S - Phlips 5 Device Universal Remote... Manuel utilisateur

Philips

Philips SRP4040 Manuel utilisateur

Philips

Philips Perfect replacement SRU5108 Manuel utilisateur

Philips

Philips TSU9600/93 Guide de sécurité

Philips

Philips SRP9488C/27 Manuel utilisateur

Philips

Philips SRP4319S-27 Manuel utilisateur

Philips

Philips SRU2103S Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation