Philips SBC RU 252 Manuel utilisateur

Universal

SBC RU 252

Instructions for use

English 4

Mode d'emploi

Français 8

Bedienungsanleitung

Deutsch 12

Gebruiksaanwijzing

Nederlands 16

Instrucciones de manejo

Español 20

Manual de utilização

Português 24

Instruzioni per l'uso

Italiano 28

Ïäçãßåò ×ñÞóçò

ÅëëçíéêÜ 32

Bruksanvisning

Svenska 36

Brugsanvisning

Dansk 40

Bruksanvisning

Norsk 44

Käyttöohje

Suomi 48

Instrukcja u ytkowania

Polski 52

www.philips.com/welcome

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 1

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 2

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 3

Contents

1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Inserting the batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . 56-67

Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

1. Introduction

Congratulations on your purchase of the Philips SBC RU252 universal remote

control. After installing the remote control you can operate a maximum of

2 different appliances with it:TV and VCR/DVD players/recorders.

You can find information about how to prepare this remote control for use in

the chapter ‘Installing the remote control’.

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2Place two R03, UM4 or AAA type batteries

into the battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Testing the remote control

The remote control has been programmed to operate most Philips

appliances. Because the RU252 may use different signals for each make and

even for different models of the same make, it is advisable to test whether

your appliance responds to the RU252.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other appliances (VCR/DVD players/recorders) which you

want to operate using the RU252.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

2Press the RU252’s TV key to select TV.

3Check whether all the keys are working. For

an overview of the keys and their functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the key commands the RU252 is

ready for use.

• If the device does not respond at all or not to all of the key

commands, follow the instructions under ‘Setting the remote

control’.

Instructions for use

English

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 4

English

Instructions for use

Setting the remote control

This is only necessary if your appliance does not respond to the RU252.

If that is the case, the RU252 does not recognize the brand and/or model of

your appliance and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other appliances (VCR/DVD players/recorders) which you

want to operate using the RU252.

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the code list at the back of this manual.

One or more four-figure codes are shown for each brand.

Note the first code.

Be careful! There are separate tables for TV,VCR and DVD.

Make sure you use the codes from the correct table.

3Keep the TV Key pressed for 3 seconds until

the green indicator light remains lit.

4Then enter the code noted in step 2 using

the digital keys.

– The green indicator light will now flash twice.

If the light flashes once for an extended period,

the code has not been entered properly or

the wrong code has been entered. Start again

from step 2.

5Point the RU252 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the RU252 is ready for

use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 5

Automatically setting the remote control

If you cannot find the right code for your brand device, the remote control

can automatically search for the right code.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The RU252 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

• If the device is a DVD-player or video recorder,

insert a disk or tape and start playback.

2Then keep the TV Key pressed for 3 seconds

until the green indicator light remains lit.

3Press again the the Standby key and Keep it

pressed

– The RU252 now starts emitting all known ‘TV off ’ signals, one by one.

Each time a code is sent, the green indicator

light flashes.

4When your TV switches of (standby mode)

immediately release the standby key of the

RU252

-The RU252 has now found a code that works

on your TV

5Check if you can operate all functions on your TV with the RU252.

• If this is not the case, you can redo the automatic setting.The

RU252 will then search for a code that perhaps works better.

– After the RU252 has run through all the known codes, the search will

stop automatically and the green light will stop flashing.

– Automatic programming of a TV takes a maximum of 5 minutes.

For VCR/DVD this time is 6 minutes

Instructions for use

English

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 6

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . . switches TV,VCR or DVD mode on or off.

2Indicator light . . . . . - lights up green when an IR signal is being sent.

- flashes green when a code is being entered and

when automatically setting the remote control.

3TV - VCR/DVD. . . . . select the device you want to operate:

TV,VCR or DVD.

4s(Mute) . . . . . . . . . . mutes the sound of the TV.

5- PROG + . . . . . . . . . . selects a previous or following channel.

6(Menu) . . . . . . . . Wide screen:TV

Menu on/off:VCR/DVD

7Digital keys . . . . . . . . direct choice of channels and other functions.

8SHIFT . . . . . . . . . . . . . for extra functions. When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + PROG+: . . 'menu up'

SHIFT + PROG-: . . 'menu down'

SHIFT + VOL+: . . . . 'menu right'

SHIFT + VOL-: . . . . 'menu left'

SHIFT + . . . . . . Menu on/off

Try out other combinations with the Shift-key on your appliance in order to

find out which functions are available. Only functions featured on the original

remote control are available.

9. . . . . . . . . . . . . . . . switches teletext on.

05. . . . . . . . . . . . . . . . . . - red teletext key

- rewind (VCR/DVD)

9. . . . . . . . . . . . . . . . . . - green teletext key

- stop (VCR/DVD)

0. . . . . . . . . . . . . . . . . . record (VCR/DVD)

;. . . . . . . . . . . . . . . . . . . - yellow teletext key

- pause (VCR/DVD)

6. . . . . . . . . . . . . . . . . . - blue teletext key

- wind (VCR/DVD)

2. . . . . . . . . . . . . . . . . . - white teletext key

- play (VCR/DVD)

!. . . . . . . . . . . . . . . . switches teletext off.

@-/-- . . . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

#OK . . . . . . . . . . . . . . . . confirms your selection.

$- VOL + . . . . . . . . . . . . adjusts the TV volume.

%AV. . . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

Note! The VOL – /VOL + and s(Mute) keys give direct access to the TV volume

even if you are operating your VCR or DVD equipment.

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

Instructions for use

English

RU252ok.qxd:RU252.qxd 17/08/07 15:56 Page 7

Autres manuels pour SBC RU 252

Table des matières

Autres manuels Philips Télécommande

Philips

Philips SBC RU 098 Manuel utilisateur

Philips

Philips Omni Remotes RC3441507/01BR Manuel utilisateur

Philips

Philips SBCRU631/00 Manuel utilisateur

Philips

Philips ProntoTSU9800 Manuel utilisateur

Philips

Philips Perfect replacement SRC2063WM Manuel utilisateur

Philips

Philips SRC3036 Manuel utilisateur

Philips

Philips Perfect replacement SRP5107WM/17 Manuel utilisateur

Philips

Philips US2-PMDVD6T Manuel utilisateur

Philips

Philips 22AV1104 Manuel utilisateur

Philips

Philips SRU4007/27 Manuel utilisateur

Philips

Philips Prestigo SRT8215/10 Manuel utilisateur

Philips

Philips SBCRU510/00B Manuel utilisateur

Philips

Philips SRP5004/87 Manuel utilisateur

Philips

Philips srp3014 Manuel utilisateur

Philips

Philips SRU5130/53 Manuel utilisateur

Philips

Philips SBCRU410/00 Manuel utilisateur

Philips

Philips SRU5100/27 Guide de l'administrateur

Philips

Philips SRU1060/10 Manuel utilisateur

Philips

Philips Prestigo SRU8015 Manuel utilisateur

Philips

Philips SRP2006/55 Manuel utilisateur

Philips

Philips TSU7000 Manuel utilisateur

Philips

Philips SRU3003 Manuel utilisateur

Philips

Philips SRU3003WM - Universal Remote Control Manuel utilisateur

Philips

Philips YKF314001 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation