Philips LWL2 Series Manuel utilisateur

LWL2 Series

VANDAL-RESISTANT WET/DAMP LOCATION LED EXIT

Page 1 of 2

Job Information Type:

Job Name:

Cat. No.:

Notes:

Features

Illumination: Illumination

of the exit stencil face is

accomplished with long lasting,

high-output LEDs. Hot spots

and striations are eliminated

by the internal light chamber,

which is specially designed

around the high-performance

LED array. Average illumination

levels are in excess of 25fl

(79 cd/m2).

Housing: Die-cast aluminum

housing with premium impact-

resistant injection molded

polycarbonate covers. Housing

is powder coated and back

cover is molded in color to

match. Front cover is clear.

Stencil is provided with field

selectable chevrons and is

contained inside the fully

gasketed housing. All exposed

hardware is both vandal-

resistant and anti-corrosion

coated. Universal knockouts on

backplate allow wall mounting

directly to standard junction

boxes. Die-cast aluminum

canopy is provided for top/side

mounting and is powder coated

to match housing.

Operating Temperature

Range: Wet/Damp Location

-40°F (-40°C) to 113°F (45°C)

Diagnostic Electronics

(standard): 120/277 VAC

dual voltage input with surge

protection is standard on all

AC models. For emergency

operation, the charging system

is microprocessor driven with

software embedded diagnostic

routine and temperature

compensation. 120/277 VAC

input, surge protection,

brownout, AC lockout and low

voltage disconnect features are

standard.

Self-Testing Diagnostics

(standard): The diagnostic/

charging platform with self-

testing mode automatically

runs a one-minute self-test

every 30 days and a 30-minute

test on the sixth and twelfth

month. A one-minute or

90-minute test may be initiated

via the push to test switch on

the unit or by activating the

appropriate test command on

the optional IR test device.

Electrical Specifications:

AC Only Red:

3.8 W (120 VAC), PF 0.96

3.8 W (277 VAC), PF 0.91

AC Only Green:

4.0 W (120 VAC), PF 0.95

4.0 W (277 VAC), PF 0.90

Self-Powered Red:

4.7 W (120 VAC), PF 0.95

4.8 W (277 VAC), PF 0.97

Self-Powered Green:

4.7 W (120 VAC), PF 0.95

4.7 W (277 VAC), PF 0.99

Code Compliance

UL 924 and UL wet/damp

location listed. NFPA 101,

NEC, BOCA, OSHA and IBC

illumination standards. Meets

ADA specifications for wall

mounted lighting fixtures. IEC

61951-1 Life Testing (batteries).

Certified to the California

Energy Commission in

accordance with California law.

NEMA Premium certified.

Warranty

Five-year full electronics and

five-year full plus five-year

prorated battery warranty.

4.5"

(11.43 cm)

8.85"

(22.48 cm)

LWL2NURBSD2T

13.8"

(35.26 cm)

4.5"

(11.43 cm)

2.4"

(6.1 cm)

LWL2 Series

VANDAL-RESISTANT WET/DAMP LOCATION LED EXIT

Page 2 of 2

Philips Lightolier

e: [email protected]

t: (508) 679-8131

w: www.lightolier.com

LWL2 Series August 8, 2011

Specifications are subject to change without notice.

Job Information Type:

Ordering Information

Series

LWL2 = Wet/

Damp Location

LED Exit

Blank = AC Only

SD2T = Self-

Testing Diagnostic

Electronics

(required with

nickel cadmium

models)

Model Designator

Note

1) Some options may impact UL listing. Consult factory for specifics.

2) Must specify “PM” option for compatibility with pendant kit.

A= Audible Diagnostics

BF = Buzzer/Flasher (self-powered units only)

BZ = DC Buzzer

DC = 12-48 VDC Input (AC only models)

EX = Special Input Transformer (consult

factory)1

FA = 24 VDC Fire Alarm Interface

FL = Emergency Flasher (self-powered units

only)

PM = Pendant Mount Only (must order

pendant kit accessory)2

SW = Special Wording (consult factory)

2CKT1 = 120 VAC Two Circuit (AC only

models)

2CKT2 = 277 VAC Two Circuit (AC only

models)

Factory Installed Options

Accessories (order as a separate item)

SDREMOTE = Infrared Remote Test Device

T15TPTOOL = Tamperproof Tool

TPKITB = Pendant Kit, 12” Stem, Black

TPKITW = Pendant Kit, 12” Stem, White

A= AC Only

N= Nickel

Cadmium

Battery Type

W= White Housing and White

Stencil

B= Black Housing and Black

Stencil

G= Gray Housing and Gray

Stencil

WA = White Housing and

Brushed Aluminum Stencil

BA = Black Housing and Brushed

Aluminum Stencil

GA = Gray Housing and Brushed

Aluminum Stencil

Stencil Face/Housing Color

LWL2

1= Single

U= Universal

Single/Double

Face

Face Options

R= Red

G= Green

Letter Color

8.85"

(22.48 cm)

13.8"

(35.26 cm)

5.5"

(13.97 cm)

2.4"

(6.1 cm)

Pendant Kit

Ce manuel convient aux modèles suivants

Autres manuels Philips Luminaire

Philips

Philips Calculite 8046 Manuel utilisateur

Philips

Philips XP Series Manuel utilisateur

Philips

Philips HF3471/01 Manuel utilisateur

Philips

Philips 1050SQ_3D Manuel utilisateur

Philips

Philips Selecon Aurora Manuel utilisateur

Philips

Philips C3 Series Manuel utilisateur

Philips

Philips Lytespan 8108 Manuel utilisateur

Philips

Philips SL111A2 Manuel utilisateur

Philips

Philips Lightolier MJ5 Manuel utilisateur

Philips

Philips Lytecaster 1001 Manuel utilisateur

Philips

Philips GreenSpace Accent Elbow Manuel utilisateur

Philips

Philips Lightolier IS-CWL270612 Manuel utilisateur

Philips

Philips FS01 Manuel utilisateur

Philips

Philips 6911231PH Manuel

Philips

Philips Lytecaster 1000ICV Manuel utilisateur

Philips

Philips Lytecaster 1021 Manuel utilisateur

Philips

Philips Lytecaster 1101HSW Manuel utilisateur

Philips

Philips LUMINAIRES TRACK SYSTEM MINI HID CYLINDERS Manuel utilisateur

Philips

Philips 1001FRD Manuel utilisateur

Philips

Philips iColor Accent Powercore Manuel utilisateur

Philips

Philips ALETTA AL1T5 Manuel utilisateur

Philips

Philips 6910860PU Manuel

Philips

Philips ColorBlast 6 Manuel utilisateur

Philips

Philips Lytespan 8106 Manuel utilisateur

Manuels Luminaire populaires d'autres marques

Emos

Emos CLASSIC ZY1431T Manuel utilisateur

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuel utilisateur

Hedler

Hedler C 12 silent Manuel utilisateur

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuel utilisateur

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuel utilisateur

Lightmaxx

Lightmaxx Shaft 5R Manuel utilisateur

Triarch

Triarch 31083 Manuel utilisateur

IKEA

IKEA TIVED Manuel utilisateur

Lightolier

Lightolier LP200 Manuel utilisateur

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuel utilisateur

Martin

Martin MAC 250 Krypton Manuel utilisateur

Cooper Lighting

Cooper Lighting Halo L3232E Manuel utilisateur

Stageline

Stageline ODW-2410RGBW Manuel utilisateur

Light Sky

Light Sky Tornado Series Manuel utilisateur

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuel utilisateur

Lightolier

Lightolier Lytespan 83ED17S Manuel utilisateur

Lightolier

Lightolier Calculite CS8226 Manuel utilisateur

ArtFox

ArtFox Beam 15R extreme Manuel utilisateur