Philips QT4085 Manuel utilisateur

QT4085

ENGLISH 6

DANSK 15

DEUTSCH 24

 34

ESPAÑOL 45

SUOMI 55

FRANÇAIS 64

ITALIANO 74

NEDERLANDS 84

NORSK 94

PORTUGUÊS 103

SVENSKA 113

TÜRKÇE 122

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet

from the support that Philips offers, register your product at www.philips.

com/welcome.

This maintenance-free Philips vacuum beard trimmer combines innovative

technology and outstanding comfort of use.

The integrated vacuum mechanism absorbs cut-off hairs during use and

guarantees a clean washbasin after use.

The contour-following comb attachment, the self-sharpening cutting unit

and the adjustment ring for selecting hair lengths of 1.5 to 18mm ensure

excellent cutting results and time-saving operation.The high-quality

precision trimmer guarantees a precise and dened cut and the

ergonomic shape of the appliance allows pleasant and comfortable

handling.

This Philips vacuum beard trimmer is excellently suited for cutting and

contouring your beard and sideburns.

General description (Fig. 1)

AComb attachment

BDetachable cutting unit

CFlexible hair guide

D Hair-collection chamber & lter

EAdjustment ring (Precision Zoom Lock `)

FTurbo button

GOn/off button

HGreen charging light with battery-full indication

IRed battery-low light

JSocket for appliance plug

KPrecision trimmer

LAdapter (2.5V/1500mA)

MCleaning brush

Important

Read this user manual carefully before you use the appliance and save it

for future reference.

ENGLISH

Danger

- Make sure the adapter does not get wet.

Warning

- Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

- The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do not play with

the appliance.

Caution

- Charge, use and store the appliance at a temperature between 15°C

and 35°C.

- Do not charge the appliance in a pouch or cassette.

- Do not immerse the appliance in water or any other liquid, nor rinse

it under the tap.

- Only use the adapter supplied.

- If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

- The adapter transforms 220-240 volts to a safe low voltage of less

than 24 volts.

- Do not use the appliance if the cutting element or the appliance itself

is damaged or broken, as this may cause injury.

- This appliance is only intended for trimming the human beard. Do

not use it for any other purpose.



- This Philips appliance complies with all standards regarding

electromagnetic elds (EMF). If handled properly and according to the

instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.

ENGLISH 7

Charging

Charge the appliance fully before you use it for the rst time and after a

long period of disuse.

Charging takes about 70 minutes if the appliance is completely empty.

1 Switch off the appliance.

2 Insert the appliance plug into the appliance and put the adapter in

the wall socket.

,The charging light goes on to indicate that the appliance is

charging. (Fig. 2)

Charge indications

- The green charging light lights up continuously during charging.

- The green charging light starts ashing when the battery is fully

charged.

- If the red battery-low light ashes when you switch off the appliance

after cordless use, the battery is low and needs to be charged.

- If the red battery-low light ashes and the motor does not start

running when you press the on/off button, the battery is empty and

needs to be charged.

Preparing for use

Always comb your beard or moustache with a ne comb before you

start trimming.

Using the appliance

Corded trimming

Do not run the appliance from the mains when the battery is fully

charged.

Note: If the battery is low, you can also use the appliance from the mains:

1 Switch off the trimmer, connect it to the mains and wait a few

seconds before you switch it on.

ENGLISH8

2 If the battery is completely empty, wait a few minutes before you

switch on the appliance.

Turbo function

You can use the turbo function for greater suction power and increased

cutting speed.

1 Switch on the appliance (Fig. 3).

2 Press the turbo button (Fig. 4).

When you switch off the appliance, the turbo function is deactivated

automatically.

Absorbing cut hairs

The suction mechanism is activated automatically as soon as you switch

on the appliance. It absorbs cut hairs during every kind of use, i.e.

trimming with and without comb attachment and contouring. The exible

hair guide follows the contours of the face and directs cut hairs towards

the nozzle of the vacuum mechanism.

We advise you to empty the hair-collection chamber after each trimming

session.When trimming long, dense beards, it may also be necessary to

empty the hair-collection chamber during the trimming session in order

to maintain optimal suction performance (see chapter ‘Cleaning’, section

‘Hair-collection chamber’).

Note:To ensure optimal functioning of the vacuum system, do not cut off

more than approx. 7mm of your overall beard length at a time. If you want to

cut your beard shorter, repeat the process one or more times.

Trimming with comb attachment

1 Turn the adjustment ring (Precision Zoom Lock `) to the desired

hair length setting (see table). (Fig. 5)

,The setting appears in the window below the adjustment ring

(Precision Zoom Lock `).

ENGLISH 9

Hair length settings

Setting Resulting hair length

1 1.5mm

2 2.5mm

3 4mm

4 5.5mm

5 7.5mm

6 9.5mm

7 12mm

8 15mm

9 18mm

If you trim for the rst time, start with the maximum hair length setting

(9).

2 Switch on the appliance (Fig. 3).

- During trimming, you can use the turbo function for extra suction

power (Fig. 4).

3 To trim most effectively, move the trimmer against the direction of

hair growth. (Fig. 6)

Note: Make smooth and gentle movements and make sure the surface of the

comb attachment always stays in contact with the skin.

Note: Do not move the trimmer too fast.

4 Switch off the appliance after use and clean it (see chapter

‘Cleaning’).

Trimming at the unique ‘stubble look’ setting

- Use the trimmer with the comb attachment set to hair length setting

1.This allows you to create a ‘stubble look’ (Fig. 7).

ENGLISH10

Autres manuels pour QT4085

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Rasoir électrique

Philips

Philips PQ228 Manuel utilisateur

Philips

Philips PQ205 Manuel utilisateur

Philips

Philips SensoTouch 3D RQ1250/16 Manuel utilisateur

Philips

Philips Speed-XL HQ8170CC Manuel utilisateur

Philips

Philips Lumea SC2009 Manuel utilisateur

Philips

Philips Ecomoods 40235/31/16 Manuel utilisateur

Philips

Philips Norelco QC5580 Manuel utilisateur

Philips

Philips 7000 series Manuel utilisateur

Philips

Philips Ladyshave HP6301/00 Manuel utilisateur

Philips

Philips HQ7617/16 Manuel utilisateur

Philips

Philips HQ9160 Manuel utilisateur

Philips

Philips SensoTouch RQ1168/30 Manuel utilisateur

Philips

Philips PT729CC Manuel utilisateur

Philips

Philips HQ7743/17 Manuel utilisateur

Philips

Philips S7882 Manuel utilisateur

Philips

Philips RQ1187/16 Manuel utilisateur

Philips

Philips S7000 series Manuel utilisateur

Philips

Philips HQ7120 Manuel utilisateur

Philips

Philips HQ7140 Manuel utilisateur

Philips

Philips S3590 Manuel utilisateur

Philips

Philips QS6140 Manuel utilisateur

Philips

Philips HP6479 Manuel utilisateur

Philips

Philips 7140XL Manuel utilisateur

Philips

Philips HQ9 Manuel utilisateur

Manuels Rasoir électrique populaires d'autres marques

Norelco

Norelco Quadra 7610X Manuel utilisateur

Braun

Braun WaterFlex WF2s Manuel utilisateur

Daga

Daga MT-400 Manuel

Remington

Remington BHT100 Manuel utilisateur

Kompernass

Kompernass KH 5537 Manuel utilisateur

Remington

Remington BHT6100 Manuel utilisateur

MIA

MIA Aqua Body Manuel utilisateur

Matheo

Matheo MLR 15 Manuel utilisateur

CTC Union

CTC Union Clatronic HSM 3441 NE Manuel utilisateur

Remington

Remington XR7000 Manuel utilisateur

Eldom

Eldom G47 Manuel utilisateur

Braun

Braun silk-epil 5 Manuel utilisateur

SEVERIN

SEVERIN SÉRIE E700 0533 Guide de l'utilisateur

Remington

Remington PR1355 Manuel utilisateur

Aurora

Aurora AU 3543 Manuel utilisateur

Braun

Braun InterFace 3614 Manuel utilisateur

Wahl

Wahl 8061 5-STAR Manuel utilisateur

Norelco

Norelco 4404LC Manuel utilisateur