Pentair Keystone Figure 952 NPS 2 Instructions d'installation

KEYSTONE FIGURE 952 KNIFE GATE VALVES

NPS 2 - 24 DiSaSSembly iNStructioNS

Removal, disassembly and inspection instructions.

RISING SPINDLE VALVES

•Ensureallpartsarecleanandfreeofforeign

material, particularly the chest area between

the gland and valve bore.

•Foroptimumleak-freeservice,gatefaces

andedgesmustbesmooth,andfreeof

gallingorburring.Repairorreplaceif

excessively worn or damaged.

•Seatingfacesinvalveboremustbesmooth

andundamagedotherwiseleakageislikely

tooccur.Replaceifnecessary.

•Checkglandsealingfacesontopof

valve body. They should be smooth and

undamaged.Repairifnecessary.

•Checkthreadsonspindlesandbolts-

repair/replaceifnecessary.

•Replacelocknutsifthreadsarestripped

orweakened.Theseareusedasprotection

against vibration.

•Checkandreplacegateguides(13)ifnecessary.

NOTE:

NPS2-8F952valveillustrated

NOTE:

NPS10-24F952valveillustrated

www.pentair.com/valves PPLBE-0004-US 14/07

REMOVAL AND DISASSEMBLY

1. Ensure pipeline is not pressurized and that

any hazardous medium is drained away.

2.Largevalvesneedachainblockorcraneto

assist.Iflarge,heavycylindersarefitted,they

canberemovedfirstiffeltnecessary:

 •Disconnectactuatorairlinesandpower

supplies etc.

 •Supportactuator,disconnectactuatorrod

fromvalvegate,undobridgeboltsorhold

downbolts,removeactuatorfromvalve.

3.Supportvalvebodyandremoveallflange

bolts.

4.Removevalveandgasketsfromthepipeline.

For NPS 2-8 valves

 •Loosenglandboxnuts(10)toendofpillar

(9)threads.Removeclevisfastener(15).

Removebothbridgenuts(13).

 •Removehandwheel(oractuatorassembly.

Unscrewbothpillars(9)andremove.

For NPS 10-24 valves

 •Removeglandboxnuts(10)andwashers

(11,12).Removeclevisfasteners(19,20).

 •Removeuprightbolts(14)andwashers(15)

atvalvebody(1).Removepillarnut(23)and

washer(22).

5.Withdrawglandbox(3)andgate(2)assembly.

6.Removegateguides(13)fromvalvebody(1).

KEYSTONE FIGURE 952 KNIFE GATE VALVES

NPS 2 - 24 DiSaSSembly iNStructioNS

NON - RISING SPINDLE VALVES

•Ensureallpartsarecleanandfreeofforeignmaterial,particularlythechestareabetweenthe

gland and valve bore.

•Foroptimumleak-freeservice,gatefacesandedgesmustbesmooth,andfreeofgallingor

burring.Repairorreplaceifexcessivelywornordamaged.

•Seatingfacesinvalveboremustbesmoothandundamagedotherwiseleakageislikelytooccur.

Replaceifnecessary.

•Checkglandsealingfacesontopofvalvebody.Theyshouldbesmoothandundamaged.Repair

ifnecessary.

•Checkthreadsonspindlesandbolts-repair/replaceifnecessary.

•ReplaceNylocnutsifthreadsarestrippedorweakened.Theseareusedasprotectionagainst

vibration.

•Checkandreplacegateguides(11)ifnecessary.

REMOVAL AND DISASSEMBLY

1. Ensure pipeline is not pressurized and that any hazardous medium is drained away.

2. Largevalvesneedachainblockorcranetoassist.Iflarge,heavycylindersarefitted,theycan

beremovedfirstiffeltnecessary:

•Disconnectactuatorairlinesandpowersuppliesetc.

 •Supportactuator,disconnectrodfromvalvegate,undobridgeboltsorholddownbolts,

removeactuatorfromvalve.

3. Supportvalvebodyandremoveallflangebolts.

4. Removevalveandgasketsfromthepipeline.

 •Removeglandboxnuts(8)andwashers(21,10).Removeclevisfasteners(13)andwashers

(22).

 •Removeuprightmountingbolts(12)andwashers(14)atvalvebody(1).Removepillarnut(19)

andwasher(9).

5. Withdrawglandbox(3)andgate(2)assembly.

6. Removegateguides(11)fromvalvebody(1).

NOTE:

NPS10-24F952non-risingspindlevalveillustrated.

PENTAIR VALVES & CONTROLS

www.pentair.com/valves

AllPentairtrademarksandlogosareownedbyPentairLtd.Allotherbrandorproductnamesaretrademarksorregisteredmarksoftheirrespectiveowners.

Becausewearecontinuouslyimprovingourproductsandservices,Pentairreservestherighttochangeproductdesignsandspecificationswithoutnotice.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pentair Unité de contrôle

Pentair

Pentair AUTOTROL 363 Manuel utilisateur

Pentair

Pentair Fleck 2850 Manuel utilisateur

Pentair

Pentair Sapag 1100 Instructions d'installation et d'utilisation

Pentair

Pentair AUTOTROL LOGIX 742 Manuel utilisateur

Pentair

Pentair TRACETEK TTDM-128 Manuel de service

Pentair

Pentair FLECK3150 DOWNFLOW Manuel utilisateur

Pentair

Pentair AUTOTROL 742 Series Manuel utilisateur

Pentair

Pentair FLECK 125 Manuel utilisateur

Pentair

Pentair AUTOTROL Performa 263 Guide de l'utilisateur

Pentair

Pentair Fleck7000SXT Manuel utilisateur

Pentair

Pentair AUTOTROL 740 Manuel utilisateur

Pentair

Pentair Fleck 2850 Manuel utilisateur

Pentair

Pentair 2510 Manuel utilisateur

Pentair

Pentair Fleck 4600 MECH Manuel utilisateur

Pentair

Pentair FLECK 2750 NXT Guide de l'utilisateur

Pentair

Pentair KEYSTONE OM3 Manuel utilisateur

Pentair

Pentair AUTOTROL 368 Manuel utilisateur

Pentair

Pentair FLECK 3150 NXT Guide de l'utilisateur

Pentair

Pentair Fleck 2510 ECONOMINDER Manuel utilisateur

Pentair

Pentair HI-FLOW 261049 Manuel utilisateur

Pentair

Pentair Fleck 9000-SXT Manuel utilisateur

Pentair

Pentair E-Box MAESTRO Mode d'emploi

Pentair

Pentair AURORA CBV-S5 Manuel utilisateur

Pentair

Pentair SIATA V132-SFE Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur