Pelonis HF-0021 Manuel utilisateur

OWNER’S

MANUAL

Fan Forced

Area

Heater

PLEASE READ AND SAVE THESE INSTRUCTIONS

Model HF-0021

IMPORTANT INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce

the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.

If provided, use handles when moving this heater. Keep combustible materials, such

as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from

the front of the heater and keep them away from the sides and rear.

3. Extreme caution is necessary when any heater is used by or near children or invalids

and whenever the heater is left operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord or plug or after the heater

malfunctions, has been dropped or damaged in any manner. Return heater to

authorized service facility for examination, electrical or mechanical adjustment, or

repair.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. Never locate heater where it may fall into bathtub or other water container.

8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar

coverings. Arrange cord away from traffic area and where it will not be tripped over.

9. To disconnect heater, first turn controls to off, then remove plug from outlet.

10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this

may cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not

use on soft surfaces, like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where

gasoline, paint, or flammable liquids are used or stored.

13. Use this heater only as described in this manual. Any other use not recommended by

the manufacturer may cause fire, electric shock, or injury to persons.

14. Avoid the use of an extension cord because the extension cord may overheat and

cause a risk of fire. However, if you have to use an extension cord, the cord shall be

No. 14 AWG minimum size and rated not less than 1875 watts.

15. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do

not plug the heater into a circuit that already has other appliances working.

16. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC

outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact

a qualified electrician to replace loose or worn outlet.

17. The output of this heater may vary and its temperature may become intense enough to

burn exposed skin. Use of this heater is not recommended for persons with reduced

sensitivity to heat or an inability to react to avoid burns.

18.“SAVE THESE INSTRUCTIONS”

OPERATING INSTRUCTIONS

•Place the heater on a firm level surface free from obstructions, and at least 3 ft. away

from any wall and any other objects such as furniture, curtains, plants or combustible

material.

•With the Power and Setting Control “A” in the ”OFF” position, plug the heater into a

grounded 120V outlet.

•Turn the heater ”ON” by turning the Power and Setting Control “A” clockwise to your

desired power setting (FAN, LOW, MED, or HIGH). The Power Indicator Light “B”

will illuminate. The power settings operate as follows:

FAN: The Fan circulates room air only. The heating elements are “OFF”.

LOW: The Fan and heating elements operate at 600 Watts.

MED: The Fan and heating elements operate at 900 Watts.

HIGH: The Fan and heating elements operate at 1500 Watts.

CAUTION: This heater includes a Thermal Cut-Off Overheat Protection System that shuts

the heater off if it overheats due to abnormal conditions. If this occurs, turn the heater

”OFF”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it

to cool for a few minutes, plug it back in, and resume normal operation.

ADDITIONAL FEATURES

This heater has additional features:

•Internal Safety Fuse - acts as back up protection to the Thermal Cut-Off Protection

System.

TROUBLESHOOTING

If your heater fails to operate, please follow these instructions:

•Ensure that your circuit breaker or fuse is working properly.

•Be sure the heater is plugged in and that the electrical outlet is working properly.

•Check for any obstruction. If you find any obstruction, turn the heater “OFF”. Unplug

the heater and wait a few minutes for it to cool down. Carefully remove the

obstruction. Plug the heater in and turn it on again by referring to the OPERATING

INSTRUCTIONS.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE

WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN

OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND

COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,

PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON

THE FOLLOWING PAGE.

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least one time during the operating season in

order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH

OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for off-

season storage.

•Turn the heater “OFF”, unplug it and wait for the heater to cool down.

•Use a dry cloth to clean only external surfaces of the heater.

•Do not use any cleaning agents or detergents.

•Never immerse the heater in water.

•Pack the heater in the original carton and store it in a cool and dry place.

SPECIFICATIONS

Model No.: HF-0021

Voltage: 120V, 60Hz

Current: Maximum continuous draw: 12.5 Amps.

Output: 5200 BTUs

Power: LOW = 600 Watts, MED = 900 Watts, HIGH = 1500 Watts

Tolerances on all specifications: Approximately +5%, -10%.

IMPORTANT!

Your heater is equipped with a

polarized alternating current line plug

(a plug having one blade wider than

the other). This plug will fit into the

power outlet only one way. This is a

safety feature. If you are unable to

insert the plug fully into the outlet, try

reversing the plug. If the plug should

still fail to fit, contact your electrician to

replace your outlet. DO NOT defeat

the safety purpose of the polarized

plug.

Control Panel Functions

Power and Setting Control Power Indicator Light

SERVICE & SUPPORT

In the event of a warranty claim or if service is required for this heater, please contact us at the

following:

Tel: 866-876-4332

Email us at: MideaUSA@aol.com

For questions or comments, please write to:

PELONIS.

2617 North Great Southwest Parkway

Grand Prairie, TX 75050, USA

For your records, staple your sales receipt to this manual and record the following:

DATE OF PURCHASE: _________________________________________________________________

PLACE OF PURCHASE:________________________________________________________________

SERIAL NUMBER: ____________________________________________________________________

(STAPLE SALES RECEIPT HERE)

NOTE: PROOF OF PURCHASE IS REQUIRED FOR

ALL WARRANTY CLAIMS

ONE (1) YEAR LIMITED WARRANTY

•Please read all instructions before attempting to use this product.

•Please return the Warranty Registration card within fifteen (15) days from the date of

purchasing this product.

PELONIS warrants as limited herein to the original purchaser of retail that each new Pelonis

Fan Forced heater, shall be free of defects in material and workmanship for a period of one (1)

year from the date of original purchase. This one (1) year warranty is limited to the heating

elements, motor, and electric control circuit board.

In the event of malfunctions or failure of your Pelonis Fan Forced heater, simply deliver or send

the heater, postage prepaid along with PROOF OF PURCHASE, within the warranty period of

one (1) year, to PELONIS. PELONIS reserves the right to inspect the claimed defective part or

parts to determine if the defect or malfunction complaint is covered by this warranty. PELONIS

shall, within sixty (60) days after receipt of the product, at its option, repair and/or replace the

defective part or parts free of charge. This warranty shall only cover defects arising from normal

usage. PELONIS assumes no responsibility whatsoever if the Fan Forced heater should fail

during the warranty period by reason of:

•Misuse, negligence, physical damage or accidents.

•Lack of maintenance (see instructions for proper maintenance).

•Repair by any unauthorized party during the warranty period.

•Damage caused by connection to an improper input voltage (see specification label on

your heater).

PELONIS makes no further warranties or representations, express or implied except those

contained herein. No representative or dealer is authorized to assume any other liability

regarding the Fan Forced heater. The duration of the implied warranty granted under State law,

including warranties of merchantability and fitness for particular purpose are limited in duration

should the duration of the express warranty grant it hereunder. PELONIS shall in no event be

liable for direct, indirect, special or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts, and/or the above

limitations or exclusion may not apply to you. This warranty gives you specific legal rights and

you may have other rights which vary from state to state.

Autres manuels Pelonis Chauffage

Pelonis

Pelonis HF-0063 Manuel utilisateur

Pelonis

Pelonis HC-451 Manuel utilisateur

Pelonis

Pelonis HF-0063 Manuel utilisateur

Pelonis

Pelonis PHTPU1501 Manuel utilisateur

Pelonis

Pelonis PSH20Q3ABB Manuel utilisateur

Pelonis

Pelonis NTH15-17MR Manuel utilisateur

Pelonis

Pelonis NY1506-18SRA Manuel utilisateur

Pelonis

Pelonis NT20-12D Manuel utilisateur

Pelonis

Pelonis HC-0113 Manuel utilisateur

Pelonis

Pelonis NT15-13L Manuel utilisateur

Pelonis

Pelonis HO-201 Manuel utilisateur

Pelonis

Pelonis PSH700R Manuel utilisateur

Pelonis

Pelonis HC-0155M Manuel utilisateur

Pelonis

Pelonis PSH08F1ABBC Manuel utilisateur

Pelonis

Pelonis PSH700 Manuel utilisateur

Pelonis

Pelonis PHTPU1501WC Manuel utilisateur

Pelonis

Pelonis PTH15A2BGB Manuel utilisateur

Pelonis

Pelonis NY1507-14A Manuel utilisateur

Pelonis

Pelonis PSH700G Manuel utilisateur

Pelonis

Pelonis PSHF2022EOC Manuel utilisateur

Pelonis

Pelonis HT-0605 Manuel utilisateur

Pelonis

Pelonis HO-202C Manuel utilisateur

Pelonis

Pelonis HF-0055 Manuel utilisateur

Pelonis

Pelonis PHT30D7BBC Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur