Pelonis NT15-13L Manuel utilisateur

PLEASE READ AND SAVE THESE INSTRUCTIONS

OWNER’S MANUAL

Oscillating Ceramic Heater

MODEL: NT15-13L

IMPORTANT INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the

risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.

If provided, use handles when moving this heater. Keep combustible materials, such

as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from

the front of the heater and keep them away from the sides and rear.

3. Extreme caution is necessary when any heater is used by or near children or invalids

and whenever the heater is left operating and unattended.

4. Always unplug heater when not in use.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas and similar indoor

locations. Never locate heater where it may fall into bathtub or other water container.

9. To disconnect heater, first turn controls to off, then remove plug from outlet.

10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this

may cause an electric shock or fire, or damage the heater.

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not

use on soft surfaces, like a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where

gasoline, paint, or flammable liquids are used or stored.

13. Use this heater only as described in this manual. Any other use not recommended by

the manufacturer may cause fire, electric shock, or injury to persons.

14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension

cord or relocatable power tap (outlet/power strip).

15. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do

not plug the heater into a circuit that already has other appliances working.

16. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC

outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact

a qualified electrician to replace loose or worn outlet.

17. The output of this heater may vary and its temperature may become intense enough to

burn exposed skin. Use of this heater is not recommended for persons with reduced

sensitivity to heat or an inability to react to avoid burns.

18.

19.

To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft

surfaces, like a bed, where openings may become blocked.

“SAVE THESE INSTRUCTIONS”

Do not operate any heater with a damaged cord or plug or after the heater malfunctions,

has been dropped or damaged in any manner. Discard heater or return heater to

authorized service facility forexamination, electrical or mechanical adjustment, or repair.

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar

coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic

area and where it will not be tripped over.

Control Panel Functions

Power and Setting Control Power Indicator Light

Thermostat Control

OPERATION INSTRUCTIONS

• Place the heater on a firm level surface that is free of obstructions, and at least 3’

3 ft. (0.9m) away from all walls and other objects such as furniture, curtains, plants or

combustible material.

• With the Power and Setting Control “A” in the “OFF” position, plug the heater into

a grounded 120V outlet.

• Turn the heater “ON” by turning the Power and Setting Control “A” clockwise to

the desired power setting (LOW, HIGH, LOW & OSC or HIGH & OSC). The Power

Indicator Light “B” will illuminate. The power settings operate as follows:

LOW: The Fan and heating elements operate at LOW setting.

HIGH: The Fan and heating elements operate at 1500W.

LOW&OSC: The Fan and heating elements operate at LOW setting with oscillation.

HIGH&OSC: The Fan and heating elements operate at 1500W with oscillation.

• Turn the Thermostat Control “C” to the desired setting between “MIN” and “MAX.”

Tip-over switch: As a safety measure, the unit will shut off automatically if it is

knocked over. Should this occur, simply turn the heater off and stand it back up to a

regular upright position, then switch it back on.

IMPORTANT!

Your heater is equipped with a

polarized alternating current line plug

(a plug having one blade wider than

the other). This plug will fit into the

power outlet only one way. This is a

safety feature. If you are unable to

insert the plug fully into the outlet, try

reversing the plug. If the plug still fails

to fit, contact your electrician to

replace your outlet. DO NOT defeat

the safety purpose of the polarized

plug.

TROUBLESHOOTING

CLEANING AND STORAGE

Model No.: NT15-13L

Voltage: 120V, 60Hz

Current: Maximum continuous draw: 12.5 Amps

Output: 5200 BTUs

Power: LOW=900 Watts, HIGH=1500 Watts

Tolerances on all specifications:Approximately +5%,-10%

SPECIFICATIONS

CAUTION: This heater includes a thermal cut-off that shuts the heater off if it overheats due to

abnormal conditions. If this occurs, turn the heater “off,” unplug it, and inspect and remove any

objects on or adjacent to the heater. Allow it to cool for a few minutes, and then plug it back in

and resume normal operation.

If your heater fails to operate, please follow these instructions:

•Ensure that your circuit breaker or fuse is working properly.

•Be sure the heater is plugged in and that the electrical outlet is working properly.

•Check for any obstruction. If you find an obstruction, turn the heater “OFF.” Unplug

the heater and wait a few minutes for it to cool down. Carefully remove the

obstruction. Plug the heater in and turn it on again by referring to the OPERATING

INSTRUCTIONS.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE WARRANTY

INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE

HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR

PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO

THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.

It is recommended that the heater be cleaned at least one time during the operating season in

order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF

AND UNPLUG THE HEATER BEFORE CLEANING.Be sure to save the box for off-season storage

•Turn the heater “OFF,” unplug it and wait for the heater to cool down.

•Use a dry cloth to clean only external surfaces of the heater.

•Do not use any cleaning agents or detergents.

•Never immerse the heater in water.

•Pack the heater in the original carton and store it in a cool and dry place.

SERVICE & SUPPORT

In the event of a warranty claim or if service is required for this heater, please contact us at the

following:

Toll Free: 1-866-646-4332

Email us at: [email protected]

For questions or comments, please write to:

For your records, staple your sales receipt to this manual and record the following:

DATE OF PURCHASE: ________________________________

PLACE OF PURCHASE: ________________________________

(STAPLE SALES RECEIPT HERE)

NOTE: PROOF OF PURCHASE IS REQUIRED FOR ALL

WARRANTY CLAIMS

PRINTED IN CHINA

Midea America Corporation

Medley, FL 33178

Customer Care Center

11800 NW 100th Rd., Suite 4

ONE (1) YEAR LIMITED WARRANTY

Please read all instructions before attempting to use this product.

Please return the Warranty Registration card within fifteen (15) days from the date of

purchasing this product.

PELONIS warrants as limited herein to the original purchaser of retail that each new Pelonis

heater, shall be free of defects in material and workmanship for a period of one (1) year from

the date of original purchase. This one (1) year warranty is limited to the heating elements,

motor, and electric control circuit board.

In the event of malfunctions or failure of your Pelonis heater, simply deliver or send the heater,

postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1) year,

to PELONIS. PELONIS reserves the right to inspect the claimed defective part or parts to determine

if the defect or malfunction complaint is covered by this warranty. PELONIS shall, within sixty (60)

days after receipt of the product, at its option, repair and/or replace the defective part or parts

free of charge. This warranty shall only cover defects arising from normal usage. PELONIS

assumes no responsibility whatsoever if the heater should fail during the warranty period by

reason of:

Misuse, negligence, physical damage or accidents.

Lack of maintenance (see instructions for proper maintenance).

Repair by any unauthorized party during the warranty period.

Damage caused by connection to an improper input voltage (see specification label on

your heater).

PELONIS makes no further warranties or representations, express or implied except those

contained herein. No representative or dealer is authorized to assume any other liability regarding

the heater. The duration of the implied warranty granted under State law, including warranties

of merchantability and fitness for particular purpose are limited in duration should the duration

of the express warranty grant it hereunder. PELONIS shall in no event be liable for direct,

indirect, special or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts, and/or the above

limitations or exclusion may not apply to you. This warranty gives you specific legal rights and

you may have other rights which vary from state to state.

Table des matières

Autres manuels Pelonis Chauffage

Pelonis

Pelonis PSH700 Manuel utilisateur

Pelonis

Pelonis PSH750R Manuel utilisateur

Pelonis

Pelonis PSH08F1ABBC Manuel utilisateur

Pelonis

Pelonis CH1001 Manuel utilisateur

Pelonis

Pelonis HO-202C Manuel utilisateur

Pelonis

Pelonis HO-158E Manuel utilisateur

Pelonis

Pelonis Safe-T FURNACE HC-445 Manuel utilisateur

Pelonis

Pelonis HC-451 Manuel utilisateur

Pelonis

Pelonis NY1506-18SRA Manuel utilisateur

Pelonis

Pelonis HC-0119A Manuel utilisateur

Pelonis

Pelonis PSHF2022EOC Manuel utilisateur

Pelonis

Pelonis NTH15-17MR Manuel utilisateur

Pelonis

Pelonis NT20-12D Manuel utilisateur

Pelonis

Pelonis HF-0063 Manuel utilisateur

Pelonis

Pelonis HF-0063 Manuel utilisateur

Pelonis

Pelonis NF15-9BMB Manuel utilisateur

Pelonis

Pelonis HC-0113 Manuel utilisateur

Pelonis

Pelonis HC-350 Manuel utilisateur

Pelonis

Pelonis PSH700R Manuel utilisateur

Pelonis

Pelonis HF-0055 Manuel utilisateur

Pelonis

Pelonis HC-1010 Manuel utilisateur

Pelonis

Pelonis HB-215T Manuel utilisateur

Pelonis

Pelonis PFH15A2BGB Manuel utilisateur

Pelonis

Pelonis PSH700G Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur