Pegatron IPMTB-GS Manuel utilisateur
IPMTB-GS
Motherboard Reference Guide
2IPMTB-GS Motherboard Reference Guide
Contents
Contents....................................................................................2
Notices.......................................................................................3
Safety information....................................................................4
Specications summary ..........................................................5
Hardware Installation
1 Before you proceed............................................................................... 6
Package contents.........................................................................6
2 Motherboard layout ............................................................................... 7
Top view .......................................................................................7
Rear panel connectors .................................................................7
3 Central Processing Unit (CPU) ............................................................. 8
Installling the CPU........................................................................8
Installling the CPU heatsink and fan ..........................................10
Uninstalling the CPU heatsink and fan....................................... 11
4 System memory................................................................................... 12
Memory types.............................................................................12
Memory module rules and congurations ..................................12
Installing a DIMM........................................................................14
Removing a DIMM......................................................................14
5 Expansion slots ................................................................................... 15
Installing an expansion card.......................................................15
6 Selectors............................................................................................... 16
7 Connectors........................................................................................... 17
8 BIOS Setup reference.......................................................................... 23
Main............................................................................................23
Advanced ...................................................................................24
Power .........................................................................................25
Security ......................................................................................26
Boot............................................................................................28
Exit .............................................................................................29
IPMTB-GS Motherboard Reference Guide 3
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
4IPMTB-GS Motherboard Reference Guide
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add
a device.
• Before connecting or removing signal cables from the motherboard, ensure
that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your area. If
you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all
the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in
any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied
service technician or your retailer.
IMPORTANT: This symbol of the crossed out wheeled bin indicates that
the product (electrical and electronic equipment) should not be placed
in municipal waste. Check local regulations for disposal of electronic
products.
IPMTB-GS Motherboard Reference Guide 5
CPU Socket : Intel LGA1366
Supports : Bloomeld
FSB : Intel QPI
Chipset North bridge : Intel X58 IOH
South bridge : Intel ICH10R
Memory Triple channels, 6 slots, ECC, 240-pin DDR3,
Max. 24GB
Types: 800/PC3-6400, 1066/PC3-8500
Expansion
slots
2x PCI express slots (x16)
1x PCI express slot (x4)
1x PCI express slot (x1)
Audio Realtek ALC888S CODEC (8 Channels)
LAN Intel 82567-V Gigabit LAN
Storage 4x SATA ports (4 onboad headers) SATA300/150
2x eSATA ports
USB 10x USB 2.0 ports (6 onboard, 4 on rear panel)
1394 Via VT6315N
Rear panel
I/O ports
1x SPDIF output port
2x eSATA ports (optional)
1x 1394 port + 2x USB ports
1x LAN port + 2x USB ports
6x Audio ports
Internal
connectors
1x ATX power connector
1x ATX +12V power connector
1x CPU fan connector
1x System fan connector
1x Chassis fan connector
1x Line-In connector (optional)
1x Front panel audio connector
1x SPDIF output connector
1x IEEE1394 connector
3x USB2.0 connectors
1x ROM recovery connector
1x Front panel connector
BIOS AMI 8Mb SPI
Form factor microATX: 9.6 in. x 9.6 in.
Specications summary
*The specications are subject to change without notice.
6IPMTB-GS Motherboard Reference Guide
1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any
component.
• Use a grounded wrist strap or touch a safely grounded object or
to a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power
supply is switched off or the power cord is detached from the power
supply. Failure to do so may cause severe damage to the motherboard,
peripherals, and/or components.
• Before you install the motherboard, study the conguration of your
chassis to ensure that the motherboard ts into it.
• Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
Package contents
Check your package for the following items.
Motherboard 1x IPMTB-GS
Cables
Accessories 1x I/O shield
Support disc 1x Drivers & Utilities
Documentation 1x This Motherboad Reference Guide
Hardware Installation
IPMTB-GS Motherboard Reference Guide 7
2 Motherboard layout
USB
connectors
Audio
connectors
SAT A
connectors
ROM
recovery
connector
Front panel
connector
Memory
sockets
Front panel
audio connector
CPU fan
connector
PCIE1
connector
PCIE16
connector
PCIE4
connector
PCIE16
connector
AT X power
connector
AT X CPU power
connector
ATX_CPU
CHASSIS_FAN
Chassis fan
connector
eSAT A
ports
SPDIF_OUT1
eSAT A
System fan
connector
SYS_FAN
1394 & USB
connectors
LAN & USB
connectors
LAN+USB
1394+USB
AUDIO
SPDIF_OUT2
CPU_FAN
F_AUDIOF_LINE_IN
BATTERY
BUZZER
USB
connector
CMOS+PW
IEEE1394
connector
F_1394
intel
LGA1366
CPU Socket
North Bridge
Clear CMOS
& password
Audio line in
connector
(optional)
ROM_RECOVERY
F_PA NEL
F_USB3 F_USB2
F_USB4
SATA4(top) (top)
(bottom)SATA3
SATA2
(bottom) SATA1
ATXPWR
SAT A
connectors
PCIE X16 SLOT1
PCIE X16 SLOT2
DIMM2
DIMM1
DIMM4
DIMM3
DIMM6
DIMM5
South Bridge
Internal SPDIF
connector
PCIE X1 SLOT
PCIE X4 SLOT
SPDIF output
port
Rear panel connectors
Top view
USB 2.0 ports
IEEE1394
port
SPDIF
output port
LAN (RJ-45)
port
eSATA ports
Blue: Line input
Black: Rear Surround L/R output
Orange: Center/ Subwoofer output
Lime: Front L/R output
Pink: Microphone input
Gray: Side surround L/R output
8IPMTB-GS Motherboard Reference Guide
A
B
3 Central Processing Unit (CPU)
The motherboard comes with a surface mount socket designed for various
processors.
NOTE: Your boxed processor package should come with installation instructions
for the CPU, fan and heatsink assembly. If the instructions in this section do not
match the CPU documentation, follow the latter.
NOTE: Upon purchase of the motherboard, make sure that the socket cap is on
the socket and the socket pins are not bent. Contact your retailer immediately
if the socket cap is missing, or if you see any damage to the socket cap/socket
pins/motherboard components.
NOTE: Keep the cap after installing the motherboard. It is required for product
returns or repairs.
NOTE: The product warranty does not cover damage to the socket pins resulting
from incorrect CPU installation/removal, or misplacement/loss/incorrect removal
of the socket cap.
Installling the CPU
1. Locate the CPU socket on the
motherboard.
NOTE: To prevent damage to the socket pins, do not remove the socket cap
unless you are installing a CPU.
Socket cap
3. Move it to the left (B) until it is
released from the retention tab.
This side of the cam box
should face you.
Retention tab
Load lever
2. Press the load lever with
your thumb (A).
IPMTB-GS Motherboard Reference Guide 9
NOTE: The CPU ts in only one correct orientation. DO NOT force the CPU into
the socket to prevent damaging the delicate CPU!
Alignment key
Gold triangle mark
7. Position the CPU over the socket
as shown.
B
A
8. Close the load plate (A), then push the load lever (B)
until it snaps into the retention tab.
Alignment key
Gold triangle mark
4. Lift the load lever in the direction of the arrow (A).
Load plate
A
B
C
5. Lift the load plate with your
thumb and forenger (B).
6. Remove the socket cap
from the CPU socket (C).
3 Central Processing Unit (CPU)
10 IPMTB-GS Motherboard Reference Guide
3 Central Processing Unit (CPU)
CPU FAN
Installling the CPU heatsink and fan
The processor require a specially designed heatsink and fan assembly to ensure
optimum thermal condition and performance. When you buy a boxed processor,
the package includes the CPU fan and heatsink assembly.
NOTE: Install the motherboard to the chassis before you install the CPU fan and
heatsink assembly
NOTE: If you buy a CPU separately, make sure that you use only Intel®-certied
multi-directional heatsink and fan and make sure that a Thermal Interface
Material is properly applied to the CPU heatsink or CPU before you install the
heatsink and fan assembly.
NOTE: Make sure each fastener
is oriented as shown, with the
narrow groove directed outward.
Fastener
Motherboard hole
3. When the fan and heatsink assembly is in place, connect the CPU fan
cable to the connector on the motherboard.
2. Push down two fasteners at a time in a
diagonal sequence to secure the heatsink
and fan assembly in place.
A
B
B
A
1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the
motherboard.
GND
+12V
FAN_TACH
FAN_PWM
Table des matières
Autres manuels Pegatron Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
