PCE Instruments PCE-360 Manuel utilisateur

HVAC Meter

PCE-360

INSTRUCTION MANUAL

TES ELECTRICAL ELECTRONIC CORP.

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

[email protected]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

[email protected]

CONTENTS

Title Page

1. SAFETY INFORMATION ....................................................................................... 1

2. INTRODUCTION FEATURE .................................................................................. 4

3. SPECIFICATIONS ................................................................................................... 4

3-1 Environment Conditions....................................................................................... 4

3-2 Safety Specifications............................................................................................. 5

3-3 General Specification............................................................................................ 5

3-4 Electrical Specification......................................................................................... 7

4. PARTS & CONTROLS ......................................................................................... 10

4-1 Description of Parts & Control keys................................................................... 10

4-2 Description of Display........................................................................................ 14

5. OPERATING INSTRUCTION .............................................................................. 18

5-1 AC Current Adaptor............................................................................................ 18

5-2 Single-Phase 2-Wire (1P2W) Power System Measurement ............................... 20

5-3 Single-Phase 3-Wire (1P3W) Power System Measurement ............................... 23

5-4 Three-Phase 3-Wire (3P3W2M) Power System Measurement........................... 26

5-5 Three-Phase 3-Wire (3P3W3M) Power System Measurement........................... 29

5-6 Three-Phase 4-Wire (3P4W) Power System Measurement ................................ 32

5-7 Only One Current I4 Measurement..................................................................... 35

5-8 Manual Data Memory and Read Function Operation......................................... 35

5-9 Auto Datalogging Function Operation................................................................ 36

5-10 Phase Sequence Measurement.......................................................................... 37

5-11 Voltage, Current Waveform and Harmonic Analyzer........................................ 38

5-12 Enable Auto Power Off Function...................................................................... 38

6. MAINTENANCE .................................................................................................... 39

6-1 General Maintenance.......................................................................................... 39

6-2 Battery Replacement........................................................................................... 39

7. SOFTWARE INSTALLATION and OPERATION ............................................. 39

※

1. SAFETY INFORMATION

This Instruction Manual provides information and warnings essential for operating

this meter in a safe manner and for maintaining it in safe operating condition. Before

using this meter, be sure to carefully read the following safety information.

DANGER

•During high voltage measurement, incorrect measurement procedures could

result in injury or death, as well as damage to the meter. Please read this

manual carefully and be sure that you understand its contents before using the

meter.

DANGER

•Do not use the meter or test leads if they look damaged.

•Use extreme caution when working around bare conductors or bus bars,

Accidental contact with the conductor could result in electric shock.

•To avoid damages to the meter, do not exceed the maximum limits of the input

values shown in the specifications.

•Use the meter only as specified in this manual, otherwise, the protection

provided by the meter may be impaired.

SAFETY SYMBOLS

•Caution refer to this manual before using the meter.

•

This symbol is affixed to the meter where the operator should consult

corresponding topics before using relevant functions of the meter.

•

This mark indicates explanation, which is particularly important that the

user should read before using the meter.

Dangerous voltages.

Meter is protected throughout by double insulation or reinforced insulation.

When servicing, use only specified replacement parts.

Comply with IEC61010-1, 2nd edition

DANGER: Indicates that incorrect operation presents extreme danger of

accident resulting in death or serious injury to the user.

WARNING: Indicates that incorrect operation presents significant danger of

accident resulting in death or serious injury to the user.

CAUTION: Indicates that incorrect operation presents possibility of injury to

the user or damage to the meter.

NOTE: Denotes items of advice related to performance of the meter or to its

correct operation.

NOTES ON USE

In order to ensure safe operation and to obtain maximum performance from the

meter, observe the caution listed below.

Installation

CAUTION

•The meter is designed for indoor use and can be safely used at temperatures

ranging from 0℃to 40℃.

•Do not store or use the meter where it will be exposed to direct sunlight, high

temperature, high humidity, or condensation, if exposed to such conditions, the

meter may be damaged, the insulation may deteriorate, and the meter may no

longer satisfy its specifications.

•The meter does not construct to be waterproof or dustproof, so do not use it in

a very dusty environment or in one where will get wet.

•Do not use the unit where it may be exposed to corrosive or explosive gas. The

meter may be damaged, or may occur explosion.

Before use

WARNING

•To prevent electric shock, do not allow the meter to become wet and do not use

the unit when your hands are wet.

•When working with live circuits, take all suitable precautions against

accidents, including the use of electrical safety gear such as rubber gloves,

rubber boots, and safety helmets.

Connecting meter

WARNING

•To prevent electric shock, turn the power off before connecting the test leads

and then take measurements.

•In order to prevent electrical shock and short – circuit accidents, shut off the

power to the line to be measured before connecting the line to be measured to

the voltage input terminals.

CAUTION

•The measurement input and synchronizing input are not isolated from each

other. Connecting either one means that the other is exposed it is live, and

there is a danger of electric shock. To avoid electrical shock, connect both

terminals.

WARNING

To avoid electrical shock and / or meter damage, use caution when connecting

test leads to live components. The jaws of alligator clips can create a short

circuit between closely spaced live parts. Avoid making connections to feeder

conductors or bus bars at elevated potentials. Whenever, please make

connections to the output side of a circuit breaker as possible as you can, which

can provide better short circuit protection.

•Follow all legal requirements.

•Follow all instructions in the manuals.

•Obey posted instructions.

•Never assume that a circuit is de-energized, check it first.

•Always set up the measurement first, then connect the test leads to the circuit.

•Remove all test leads that are not in use.

•Make connections to the meter first, before connecting leads to a live circuit.

•Connect the ground lead first, then the voltage leads and the current probe,

Disconnect in reverse order.

•Route test leads carefully.

2. INTRODUCTION FEATURE

The symptoms of poor power quality include intermittent lock-ups and resets,

corrupted data, premature equipment failure, over-heating of components for no

apparent cause, etc. The ultimate cost is in downtime, decreased productivity and

frustrated personnel.

Use power analyzer to power quality trouble shooting can help you keep your

power system up and running, troubleshoot problems quickly, improve power

efficient, manage energy costs, zero in on harmonics, optimize power system

performance, improve power quality and analyze system data to design optimal

upgrades.

•10 display Easy-to-view LCD screen, and is capable of showing many power

quality parameters at the same time.

•4 current probe including for measuring a neutral line current.

•Measures single-phase 2-wire, single-phase 3-wire, three-phase 3-wire and

three-phase 4-wire systems.

•All True-RMS sensing, V, A, KW, KVAR, KVA, PF, Θ, Hz, KWh, KVARh and

KVAh measurements.

•KW, KVA, KVAR Maximum/Minimum recording.

•Voltage and Current waveform THDF, THDR measurements.

•Harmonic Analysis to the 63th order.

•Phase sequence indicator function.

•Backlight display function.

•Manual Data Memory and Read (50 sets).

•Data logging (micro SD CARD 4GB).

•USB optical interface with three phase voltage / current waveform display and

harmonic analysis.

•Easy-to-use key operation.

•Light weight and portable design.

3. SPECIFICATIONS

3-1 Environment Conditions:

Altitude up to 2000 meters

Indoor use only

Relatively humidity 80% max.

Operation ambient 0 ~ 40℃

3-2 Safety Specifications

Category Rating: 1000V Measurement Category III, Pollution Degree 2.

: IEC 61010-1 2nd Edition

CAT III: Measurement category in which measurements performed in the

building installation.

Safety Characteristics:

Current Clamps, Model TES AC3600, to be used only with the Three-Phase

Power Analyzer, Model TES-3600N.

This manual contains information and warning that must be followed by the user

to ensure safe operation and to keep the meter and its accessories in a safe

condition.

Use of this meter and its accessories in a manner not specified by the

manufacturer may impair the protection provided by the equipment.

Equipment operation, the responsible body shall be made aware that, if the

equipment is used in a manner not specified by the manufacturer, the protection

provided by the probe assembly may be impaired.

3-3 General Specification

•Maximum voltage between voltage input terminals and earth ground: 1000 Vrms

•Maximum rated working voltage for current input: 0.35 Vrms

•Maximum current for current probe: 1000Arms

•Numerical 10 display: 10 display 4 digit LCD maximum reading 9999.

•Battery life: approx. 50 hours.

•Auto power off: approx. 30 minutes.

•Low battery indication: The

is displayed when the battery voltage drops

below the operating voltage.

•Backlight display time: Auto off approx. 30 seconds.

•Sampling rate : Approx. 1 time per 1 seconds (Digital display).

•Harmonic analyzer: 1 ~ 63th order.

•Manual data memory and read capacity: 50 sets.

•Data logger capacity: micro SD CARD 4GB (Maximum 99 blocks).

•Current probe jaw opening diameter: Cables

40mm.

•Operating temperature: 0°C to 40°C

•Operating humidity: Maximum relative humidity of 80% for temperatures up to

31°C decrease linearly to 50% relative humidity at 40°C

(non-condensed).

•Temperature coefficient: 0.1 ×(specified accuracy) / °C (<18 or >28°C)

•Storage temperature and humidity: -10°C to 60°C / R.H. < 70% non-condensed.

•Dimensions: Meter →235(L)×117(W)×54(H)mm.

Current probe →193(L)×88(W)×40(H)mm.

•Weight: Meter including battery →approx. 730g

Current probe →approx. 333g

•Accessories:

1. TES 3600 AC CURRENTADAPTOR x 4pcs

Category Rating: CAT III 600V per IEC61010-1, Pollution Degree2.

: IEC 61010-1 2nd Edition and IEC61010-2-032

Input: AC 1000A maximum.

Output: 0.35mV/A

2. Voltage test lead x 4pcs

Model no: TL 202I

Manufacturer: Hong Kai Co., Ltd.

Category Rating: CAT III, 1000V, AC 10A Max.

3. Alligator clip x 4pcs

Model no: FC-A23

Manufacturer: Fu Chyi Enterprise CO., Ltd.

Category Rating: CAT III, 1000V, AC 10A Max.

4. AC Adaptor (IN-OUT Isolated type, Input 120VAC 60Hz

Model: MW35-1200300

Input: 120V AC 60Hz 6.1W

Output: 12V DC 300mA

Manufacturer: MAW WOEI Enterprise CO., Ltd.

AC Adaptor (IN-OUT Isolated type, Input 230V AC 50Hz

Model: MWD48-1200300GS

Input: 230V AC 50Hz

Output: 12V DC 300mA

Manufacturer: MAW WOEI Enterprise CO., Ltd.

5. Battery 1.5V “AA” ×8

6. Instruction manual ×1

7. PC software CD-R ×1

8. Carrying case ×1

9. Optical USB interface ×1

3-4 Electrical Specification

Accuracy: ±(％of reading ＋number of digits) at 18 ℃to

28 ℃ ( 64℉ to 82℉ ) w i th r ％.

The current error is specified within the largest circle which

can be drawn inside the jaw.



AC Voltage Trms measurement (V):

Range Resolution Accuracy Input

impedance

Overload

protection Nominal power

system frequency

999.9V 0.1V

±(0.3%rdg±10dgts)

(>10V)

2MΩ 1000Vrms 45Hz ~ 66Hz

•Display item: RMS voltage value for each channel.



AC Current Trms Measurement (A):

Range Resolution

Accuracy

(including current probe)

Current

probe output

Overload

protection

Nominal power

system frequency

999.9A 0.1A

±(0.5%rdg±15dgts)

(>3A)

0.35mV/A 1000Arms 45Hz ~ 66Hz

•Display item: RMS current value for each channel.



Active Power measurement P (KW):

Range

Resolution

Accuracy

999.9KW

0.1KW

±1.0%rdg±20dgts

•Display items: Active power of each channel and its sum of multiple channels.

•Polarity display: For influx (consumption) No symbol, For outflow

(regenerative) “ - ”.



Apparent Power measurement S (KVA):

Range

Resolution

Accuracy

999.9KVA

0.1KVA

±1.0%rdg±20dgts

•Measurement method: Calculate from RMS voltage U and RMS current I.

•Display item: Apparent power of each channel and its sum of multiple channels.

•Polarity display: No polarity.



Reactive Power measurement Q (KVAR):

Range

Resolution

Accuracy

999.9KVAR 0.1KVAR ±1.0%rdg±20dgts

•Measurement method: Calculate from apparent power S and active power P,

S P

2 2

−

•Display item: Reactive power of each channel and its sum of multiple channels.

•Polarity display: For phase lag (LAG: current is slower than voltage): “-”

For lead phase (LEAD: current is faster than voltage):

No symbol.



Power Factor measurement (COS

Range

Resolution

Calculated Accuracy

-1 ~ +1

0.001

±10dgt

•Measurement method: Calculate from apparent power S and active power P,

PF = COSψ=

P S/

•Display item: Power factor of each channel and its sum of multiple channels.



Phase angle measurement (

Range

Resolution

Calculated Accuracy

+180°~ 0°~ -180°0.1°±15dgt

•Measurement method: Calculate from power factor COSψ,ψ= COS-1PF.

•Display item: Phase angle of each channel and its sum of multiple channels.

•Polarity display: For phase lag (LAG: current is slower than voltage): “-”.

For phase lead (LEAD: current is faster than voltage):

No symbol.



Frequency measurement (Hz):

Range

Resolution

Accuracy

Measurement source

60HZ

0.1Hz

±0.1%rdg±2dgt

Voltage U1 > 10V

•Measurable input range: > 10V



Three Phase Sequence Detection:

Input voltage range

Normal phase indication

Reverse phase indication

Measurement source

3P > 10V

U1, U2 and U3



Active Power Energy measurement (KWh):

Range Resolution

Active power

accuracy

Timer interval Timer Accuracy

9.999KWh

0.001KWh

±1.0%rdg±20dgt 1 sec ±50ppm (25℃, 77℉)

99.99KWh

0.01KWh

999.9KWh

0.1KWh

9.999MWh

0.001MWh

30.59MWh

0.01MWh

•Measurement display: Display all active power consumption energy (sum of

absolute values).

Autres manuels pour PCE-360

Table des matières

Autres manuels PCE Instruments Instrument de mesure

PCE Instruments

PCE Instruments PCE-428 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VDL 16l Manuel utilisateur

PCE Instruments

PCE Instruments PCE-155 Manuel utilisateur

PCE Instruments

PCE Instruments Schiltknecht MiniAir 20 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-MSR 150 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-CT 80-FN2D5 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VT 3700 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-423 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-WP 21 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-USC 20 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-310 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-MFI 400 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TG 300-NO5 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-LCT 3 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TG 75 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-LFG 5 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-T 240 Manuel utilisateur

PCE Instruments

PCE Instruments IR 90 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-ITM 20 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-320 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-DD Series Manuel utilisateur

PCE Instruments

PCE Instruments PCE-1000N Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TG 300 Manuel utilisateur

PCE Instruments

PCE Instruments PCE - 777N Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur