PCE Instruments LMD 5 Manuel utilisateur

PCE-LMD 5 / PCE-LMD 10 Lux Meter

User Manual

User manuals in various languages (français,

italiano, español, português, nederlands, türk, polski,

русский, 中文) can be found by using our

product search on: www.pce-instruments.com

Last change: 30 December 2021

v1.0

English

 
 © PCE Instruments 
 
 
Contents 
1Safety notes........................................................................................... 1 
2Delivery scope.......................................................................................1 
3Accessories........................................................................................... 1 
4Technical data .......................................................................................2 
4.1 Specifications................................................................................................................... 2 
4.2 Sensitivity......................................................................................................................... 2 
5Device description ................................................................................ 3 
5.1 Key description................................................................................................................. 3 
5.2 Display............................................................................................................................. 3 
6Operating instructions ......................................................................... 4 
6.1 Sensor ............................................................................................................................. 4 
6.2 Switch on/off the meter..................................................................................................... 4 
6.3 Select units ...................................................................................................................... 4 
6.4 Measurement................................................................................................................... 4 
6.5 Max/Min mode.................................................................................................................. 5 
6.6 Hold data.......................................................................................................................... 5 
6.7 Hold a PEAK value........................................................................................................... 5 
6.8 Relative value .................................................................................................................. 6 
6.9 Backlight.......................................................................................................................... 6 
6.10 Recording mode (PCE-LMD 10 only) ............................................................................... 6 
6.11 Auto Power Off................................................................................................................. 6 
6.12 Zero point calibration........................................................................................................ 7 
7Maintenance and cleaning ................................................................... 7 
7.1 Cleaning and storage....................................................................................................... 7 
7.2 Charging the battery......................................................................................................... 7 
8Warranty.................................................................................................7 
9Disposal ................................................................................................. 7 
 
 
 

1 Safety notes

Please read this manual carefully and completely before you usethe device for the first time. The

device may only be used by qualified personnel and repaired by PCE Instruments personnel.

Damage or injuries caused by non-observance of the manual are excluded from our liability and

not covered by our warranty.

•The device must only be used as described inthis instruction manual. If used otherwise,

this can cause dangerous situations for the user and damage to the meter.

•The instrument may only be used if the environmental conditions (temperature, relative

humidity, …) are within the ranges stated in the technical specifications. Do not expose

the device to extreme temperatures, direct sunlight, extreme humidity or moisture.

•Do not expose the device to shocks or strong vibrations.

•The case should only be opened by qualified PCE Instruments personnel.

•Never use the instrument when your hands are wet.

•You must not make any technical changes to the device.

•The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner,

no abrasives or solvents.

•The device must only be used with accessories from PCE Instruments or equivalent.

•Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

•Do not use the instrument in explosive atmospheres.

•The measurement range as stated in the specifications must not be exceeded under

any circumstances.

•Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.

2 Delivery scope

1 x lux meter PCE-LMD 5 or PCE-LMD 10 incl. lux sensor

1 x USB cable

1 x PC software (PCE-LMD 10)

1 x service bag

1 x user manual

3 Accessories

USB mains adaptoNET-USB

4 Technical data

4.1 Specifications

Measurement range

0 ... 400 kLux

0 ... 40 kfc

Accuracy

±5 % of measured value ±10 digits at standard light A

±10 % of measured value ±10 digits

Repeatability

±2 %

Sampling rate

4 Hz

Sensor

Silicon photodiode with spectral filter

Peak Hold

Detection of the peak light intensity of the shortest 10 µS

Battery level indicator

flashes when the battery voltage is too low

Data logger (PCE-LMD 10)

32,000 sets of measured values

Power supply

3.7 V Li-Ion battery

Operating conditions

-10 ... 50 °C / <80 % RH

Storage conditions

-20 ... 50 °C / <80 % RH

Dimensions

Meter: 162 x 88 x 32 mm (6.38 x 3.46 x 1.26 ")

Sensor: 102 x 60 x 25 mm (4.01 x 2.36 x 0.98")

Weight

approx. 320 g (0.70 lbs)

4.2 Sensitivity

5 Device description

5.1 Key description

1. Sensor cable

2. LCD

3. Zero calibration key

4. HOLD key

5. ON/OFF key

6. Key for switching the unit

7. REL key (relative value)

8. PEAK key

9. MIN key (PCE-LMD 5) / MIN/MAX

key (PCE-LMD 10)

10. MAX key (PCE-LMD 5) / REC key (PCE

LMD 10 only)

11. Light sensor

Notice:

The micro USB socket is located at the

bottom of the meter.

5.2 Display

1. MAX/MIN value

2. Relative value

3. PEAK value MAX/MIN

4. Freeze data

5. Analogue bar graph

6. Digital display

7. Icon for data storage

8. Unit: FC/LUX

9. Battery icon

10. Icon for full memory

11. USB icon

12. Automatic power off

6 Operating instructions

6.1 Sensor

The light sensor is firmly connected to the meter by a spiral cable. Open the sensor protection

cap, leaving the white sensor dome fully exposed. To avoid scratches and damage to the sensor

dome, replace the protective cap when the meter is not in use.

6.2 Switch on/off the meter

Press and release the key to turn on the light meter and press and hold the same key for 3

seconds to turn off the light meter.

6.3 Select units

Press the key to select LUX or FC (Foot Candle) as the unit for measurements.

6.4 Measurement

Open the sensor protection cap.

Position the sensor at a point perpendicular to the light source.

Read the value on the LCD.

Note:

During the measurement, make sure that no shadow or reflective light enters the light sensor

dome.

6.5 Max/Min mode

1. Press the MAX (PCE-LMD 5) or MAX/MIN (PCE-LMD 10) key once. The "MAX" icon

will appear on the LCD and the maximum value will be displayed on the LCD until a

higher value is measured.

2. Press the MIN (PCE-LMD 5) or MAX/MIN (PCE-LMD 10) key again. The "MIN" icon will

appear on the LCD and the minimum value will be displayed on the LCD until a lower

value is measured.

3. Press the MAX/MIN key again. The MAX MIN icon will flash on the LCD and the real-

time value will be displayed. Now the MAX and MIN values are recorded.

4. Press the MAX/MIN key again. This will take you back to step 1.

5. To exit the MAX-MIN mode, press and hold the MAX/MIN key for approximately 2

seconds until the "MAXMIN" icon disappears from the LCD.

6.6 Hold data

Press the "HOLD" key. The digital reading is held and the "HOLD" icon appears on the LCD.

Press the "HOLD" key again to return to normal operation.

Note:

When the Data Hold function is activated, the analogue bar graph above the measured value

changes according to the current light intensity.

6.7 Hold a PEAK value

The peak hold function allows the lux meter to detect the light pulse rising or falling to 10 µs.

1. Press the PEAK key. The"Pmax" icon will appear on the LCD. The lux meter measures

the MAX light pulse and displays the MAX value.The data will be updated until a higher

value is detected.

2. Press the PEAK key again. The "Pmin" icon will appear on the LCD. The lux meter will

display the MIN light pulse value. The data will be updated until a lower value is

detected.

3. To exit the Peak Hold function, press the PEAK key for approximately 2 seconds until

the "Pmax" or "Pmin" icon disappears from the LCD.

6.8 Relative value

The relative value is the difference in value between the current light value and the saved

reference light value.

To save a reading as a reference light value, press the REL key whenthe desired reference value

is displayed on the LCD. The value displayed thereafter will be the relative value of that saved

value.

For example: with the saved reference value 80 lux, if the current light value is 100 lux, the meter

will display 20 lux. To retrieve the reference value, press the REL key again. The value will be

displayed and the REL icon will flash on the LCD.

To exit REL mode, press and hold the REL key for approximately 2 seconds until the REL icon

on the LCD disappears.

6.9 Backlight

If no key is pressed for 60secondsin APO (auto power off) mode or recording mode,the backlight

will automatically dim to save battery power. Press any key to increase the brightness again. In

non-APO mode, the backlight is always very bright.

6.10 Recording mode (PCE-LMD 10 only)

The lux meter has a data logging function. Before starting the recording function, connect the light

meter to the PC via Micro-USB and set up the parameters via the Smart Logger software. Set the

start mode to "by key" and disconnect the light meter from the PC after setup. Press the REC key

on the lux meter to start recording. The REC icon will start flashing and will be displayed on the

LCD.

Do not turn off the meter during recording mode. Whenthe set number of data is reached, the lux

meter will be turned off automatically. When the memory is full, the FULL icon appears at the

bottom of the LCD. When enough data have been deleted, the FULL icon disappears.

Notice:

If the lux meter is turned off during recording, connect it to the PC and set up the parameters

again after turning it on beforestarting recording again. Otherwise, theERR icon will be displayed

on the LCD when you press the REC key for recording.

6.11 Auto Power Off

The APO function is set to ON by default. To turn off the APO function, press the key lightly.

To extend the battery life, the lux meter will automatically turn off after about 10 minutes when not

in use.

In record mode or when the meter is connected via USB, the APO function is automatically

disabled until the memory is full or the set number of records is reached.

6.12 Zero point calibration

If value drift occurs after prolonged use of the light meter, it can be calibrated with the zero

calibration function.

Cover the sensor dome with the sensor protection cap.

Press the zero key. The "CAL" icon will appear on the LCD.

Press the Zero key until the "CAL" icon disappears from the LCD, then release the key when 0.0

lux is displayed.

Note:

If the light sensor is not covered, "ERR" is displayed when the zero key is pressed.

7 Maintenance and cleaning

7.1 Cleaning and storage

1. The white plastic sensor dome should be cleaned with a damp, soft cloth if necessary.

2. Store the light meter in an area with moderate temperature and relative humidity.

7.2 Charging the battery

When the battery power is insufficient, the battery icon appears on the LCD and flashes. Use the

DC 5V power adaptor to connect to the micro USB charging port on the bottom of the meter. The

battery icon on the LCD will indicate that the battery is charging and will disappear when the

battery is fully charged.

8 Warranty

You can read our warranty terms in our General Business Terms which you can find here:

https://www.pce-instruments.com/english/terms.

9 Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament

applies. Due to the contained pollutants, batteries must not be disposed of as household waste.

They must be given to collection points designed for that purpose.

In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use

them or give them to a recycling company which disposes of the devices in line with law.

For countries outside the EU, batteries and devices should be disposed of in accordance with

your local waste regulations.

If you have any questions, please contact PCE Instruments.

PCE Instruments contact information

Germany France Spain

PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L.

Im Langel 26 23, rue de Strasbourg Calle Mayor, 53

D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete)

Deutschland France España

Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17 Tel. : +34 967 543 548

Fax: +49 (0) 2903 976 99 29 Numéro de fax: +33 (0) 972 3537 18 Fax: +34 967 543 542

[email protected] [email protected] [email protected]

www.pce-instruments.com/deutsch www.pce-instruments.com/french www.pce-instruments.com/espanol

United Kingdom Italy Turkey

PCE Instruments UK Ltd PCE Italia s.r.l. PCE Teknik Cihazları Ltd.Şti.

Unit 11 Southpoint Business Park Via Pesciatina 878 / B-Interno 6 Halkalı Merkez Mah.

Ensign Way, Southampton 55010 Loc. Gragnano Pehlivan Sok. No.6/C

Hampshire Capannori (Lucca) 34303 Küçükçekmece - İstanbul

United Kingdom, SO31 4RF Italia Türkiye

Tel: +44 (0) 2380 98703 0 Telefono: +39 0583 975 114 Tel: 0212 471 11 47

Fax: +44 (0) 2380 98703 9 Fax: +39 0583 974 824 Faks: 0212 705 53 93

[email protected] [email protected] [email protected]

www.pce-instruments.com/english www.pce-instruments.com/italiano www.pce-instruments.com/turkish

The Netherlands United States of America

PCE Brookhuis B.V. PCE Americas Inc.

Institutenweg 15 1201 Jupiter Park Drive, Suite 8

7521 PH Enschede Jupiter / Palm Beach

Nederland 33458 FL

Telefoon: +31 (0)53 737 01 92 USA

[email protected] Tel: +1 (561) 320-9162

www.pce-instruments.com/dutch Fax: +1 (561) 320-9176

[email protected]

www.pce-instruments.com/us

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PCE Instruments Instrument de mesure

PCE Instruments

PCE Instruments PCE-S 42 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-DC 10 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-CT 90 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-MAM 2 Manuel utilisateur

PCE Instruments

PCE Instruments Gossen ML 5052C USB Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TDS 200 Series Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TG 300-P5EE Manuel utilisateur

PCE Instruments

PCE Instruments PCE-DD Series Manuel utilisateur

PCE Instruments

PCE Instruments PCE-322ALEQ Manuel utilisateur

PCE Instruments

PCE Instruments PCE-LDM 45 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-FM 50N Manuel utilisateur

PCE Instruments

PCE Instruments PCE-PMI 1BT Manuel utilisateur

PCE Instruments

PCE Instruments PCE-IR 1300 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-DC1 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-HFX 100 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-HVAC 4 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-VT 3700S Manuel utilisateur

PCE Instruments

PCE Instruments ADL 11 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-830 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TTC 30 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-TG 75 Manuel utilisateur

PCE Instruments

PCE Instruments TDS-100H Manuel utilisateur

PCE Instruments

PCE Instruments PCE-PFM 2 Manuel utilisateur

PCE Instruments

PCE Instruments PCE-320 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur