PAX S920 Manuel utilisateur
11132018 ver 1.3
1
PAX S920
Mobile Terminal
Quick Setup Guide
PAX S920 Quick Setup Guide
2
1S920 Overview
The new, lightweight and versatile S920 mobile terminal
is designed for the hospitality and restaurant industries.
The S920 offers portability and ease of use for both
merchant staff and customers. The S920 boasts a high-
resolution large color touch screen and delivers faster
and easier transactions with exceptional coverage and
performance.
2What’s in The Box
Along with the S920 terminal, the following figure shows
what is also included in the box.
PAX S920 Quick Setup Guide
3
3Charge Terminal
Before starting this setup, ensure that the S920 battery
is fully charged. Plug the USB end of the charging cable
to a PC or the supplied AC power supply. Plug the micro
USB end into the micro USB port on the left side of the
terminal.
NOTE
Battery must remain installed for proper operation.
PAX S920 Quick Setup Guide
4
4S920 Front View
PAX S920 Quick Setup Guide
5
5S920 Back View
PAX S920 Quick Setup Guide
6
6S920 Power On/Off
Power up or power off the terminal by pressing and
holding the small red X button on the right side of the
keypad for 2-4 seconds and then release.
PAX S920 Quick Setup Guide
7
7S920 Communication Setup
For the terminal to communicate with the host, other
devices or to download applications, the terminal
communication method must be configured in advance.
This document covers Wi-Fi setup only.
The S920 supports Wi-Fi for network and internet
access. Available access types are DHCP and Static. The
following instructions include setting up for each
communication type.
PAX S920 Quick Setup Guide
8
7.1 S920 Wi-Fi DHCP Setup
The S920 supports Wi-Fi DHCP for network and internet
access. The following steps describe set up for DHCP
communication.
From the IDLE screen select and hold [1] and
[ENTER] on the terminal at the same time for about
1-2 seconds and then release.
At the MAIN MENU select the [right arrow],then
select [Communication].
Input the password and press [ENTER].
Select [Main Comm] then select [WiFi].
Select [Backup Comm] and then select [None].
Select [Maximum Tries] and then verify the default
value [1] is displayed for retries and press [ENTER].
Select [Connect Timeout] and verify the default
value of [300] is displayed and press [ENTER].
Select [Receive Timeout] and verify the value of
[450] is displayed and press [ENTER].
Select the [Right Arrow] then select [WiFi
Parameters]. SEARCHING…
Select the desired SSID.
PAX S920 Quick Setup Guide
9
Select [Security Type] and select the security type
used by the access point.
Select [Password],input the case sensitive
password and then press [ENTER].
Select the [right arrow],select [PING],verify that
the www.google.com address is displayed and
then press [ENTER].
The PING request results display. If the ping is
successful, then the setup is complete. If the ping
fails, then review the steps from the beginning and
verify each step.
7.2 S920 Static WiFi Setup
The S920 supports Wi-Fi Static for network and internet
access. The following instructions include setting up
Wi-Fi for Static communication type.
From the IDLE screen, select and hold [1] and
[ENTER] on the terminal at the same time for about
1-2 seconds and then release.
At the MAIN MENU, select the [right arrow],then
select [Communication].
Input the password and press [ENTER].
Select [Main Comm] then select [WiFi].
Select [Backup Comm] and then select [None].
Select [Maximum Tries],verify the default value
[1] is displayed for retries and then press [ENTER].
PAX S920 Quick Setup Guide
10
Select [Connect Timeout] and verify the default
value of [300] is displayed and press [ENTER].
Select [Receive Timeout] and verify the value of
[450] is displayed and press [ENTER].
Select the [right arrow] and then select [WiFi
Parameters]. SEARCHING…
Select the desired SSID.
Note
If the desired SSID is not displayed,
then select {Other].
[Select SSID] and verify the value is entered as
case sensitive and then press [ENTER].
Select [Security] and then select the security type
required.
Select [Password] and verify the password
displayed matches the access point. If not, input the
case sensitive password and then press [ENTER].
Select [DHCP Type] then select [Static].
Select [IP ADDRESS] and verify the value
displayed is the correct value. If not, input the IP
address value and press [ENTER].
Select [Subnet Mask] and enter the value and
press [ENTER].
Autres manuels pour S920
5
Table des matières
Autres manuels PAX Terminal de paiement
PAX
PAX S300 Manuel utilisateur
PAX
PAX Q30 Manuel utilisateur
PAX
PAX D210 W Manuel utilisateur
PAX
PAX D210-W Manuel utilisateur
PAX
PAX S900 Manuel utilisateur
PAX
PAX D200 Manuel utilisateur
PAX
PAX S300 Manuel utilisateur
PAX
PAX D190 Manuel utilisateur
PAX
PAX S60-S Manuel utilisateur
PAX
PAX D180SRF Manuel utilisateur
Manuels Terminal de paiement populaires d'autres marques
Optimum
Optimum M4230 Manuel utilisateur
Triton
Triton RL5000 Manuel utilisateur
Ingenico group
Ingenico group Lane/8000 Manuel utilisateur
Gilbarco
Gilbarco FlexPay IV CRIND Manuel d'installation et d'exploitation
Infinite Peripherals
Infinite Peripherals Infinea Tab Lite Manuel utilisateur
Ingenico
Ingenico iCT220, iCT250 Manuel utilisateur
