Patton electronics IpLink 2884 Manuel utilisateur

IPLink 2884

T1/E1 Channelized Gigabit Router

IPLink 2888

T1/E1 Multi-Megabit Inverse Mux

Quick Start Guide

Important

—This is a Class A device and is intended for use in a light industrial environment. It is not

intended nor approved for use in an industrial or residential environment.

Document Number:

13223U7-002 Rev. B

Part Number:

07M2884-QS

Revised:

August 8, 2007

Sales Ofﬁce:

+1 (301) 975-1000

Technical Support:

+1 (301) 975-1007

E-mail:

[email protected]

WWW:

www.patton.com

IPLink 2884/2888 Quick Start Guide

1.0 Powering up the IPLink

1.1 Connecting the power supply

AC Power

Connect the AC power cord female plug directly to the IPLink AC connector.

Connect the AC power cord male plug to an AC power outlet (120–240 VAC).

The

Power

LED blinks as the IPLink is powering up. When the

Power

LED stops blinking and remains lit, the

IPLink is ready for user conﬁguration. (See Figure 2 on page 3).

DC Power

The 36-60 VDC DC to DC adapter is supplied with the DC version of the Model 288x. The black and red leads

plug into a DC source (nominal 48VDC) and the barrel power connector plugs into the barrel power supply jack

on the 288x. (See Figure 1 on page 3).

• The IPLink contains no user serviceable parts. The equipment shall be

returned to Patton Electronics for repairs, or repaired by qualiﬁed

service personnel.

• Mains Voltage: Line voltages are present when the power cord is con-

nected. The mains outlet shall be within 10 feet (3 meters) of the

device, shall be easily accessible, and protected by a circuit breaker.

• For AC powered units, ensure that the power cable used meets all

applicable standards for the country in which it is to be installed, and

that it is connected to a wall outlet which has earth ground.

• Hazardous network voltages are present in WAN ports, regardless of

whether power to the IPLink is ON or OFF. To avoid electric shock,

use caution when near WAN ports. When detaching the cables, detach

the end away from the IPLink ﬁrst.

• Do not work on the system or connect or disconnect cables during

periods of lightning activity.

• For units with an external power adapter, the adapter shall be a

listed Limited Power Source.

The interconnecting cables shall be acceptable for external use and shall be rated for

the proper application with respect to voltage, current, anticipated temperature, ﬂam-

mability, and mechanical serviceability.

WARNING

CAUTION

IPLink 2884/2888 Quick Start Guide

Figure 1.

Connecting DC Power to the 288x DC Power Supply

Figure 2.

2884/2888 rear panel

There are no user-serviceable parts in the power supply section of the Model 2701.

Contact Patton Electronics Technical support at (301)975-1007, via our web site at

http://www.patton.com, or by e-mail at [email protected], for more information.

To Power

Supply Jack To -48VDC

Source

-Vin

+Vin

Black lead (-V)

Red lead (+V)

Barrel power connector

SWITCHING POWER SUPPLY

MODEL : SYD1106-2012

INPUT : 36-60V 0.8A MAX

OUTPUT : +12V 1.67A

OUTPUT POWER : 20W MAX

SN:

MADE IN CHINA BY SUNNY X X X

WARNING

RS-232

Console

ETH 1

ETH 0

Reset

T1/E1

Power

(~120–240V, 50/60 Hz, 1A)

T1/E1

Ports 0-3

Console

RS-232 port

ETH 0

10/100/1000Base-T port

ETH 1

10/100/1000Base-T port

RESET

button

120-240V, 50/60 Hz, 1A

Power

IPLink 2884/2888 Quick Start Guide

2.0 Setting the IP address

2.1 Default IP conﬁguration

The factory default IP settings are as follows:

•

LAN port (ETH 0): IP address: 192.168.200.10, Netmask: 255.255.255.0, DHCP client

If this address conﬂicts or does not match with your network, it must be changed.

2.2 Connecting to the PC and logging in via the Ethernet port

To access the IPLink conﬁguration, connect a PC’s Ethernet port to the IPLink’s LAN port (see

Figure 3

Use the black Ethernet cable included with your IPLink for this purpose.

Figure 3.

Connecting to the PC’s ENET port

Conﬁgure your PC’s Ethernet port to be on the same subnet as the IPLink.

Open a Telnet connection to the default LAN IP address of the IPLink (

192.168.200.10

Log into the unit using the following:

admin

password:

Connect to Ethernet LAN

ports, ETH 0 and ETH 1

IPLink 2884/2888

192.168.200.10

Ethernet port

ETH 0/0 ETH 0/1 Console

RS-232

Power

~ 120-240V, 50/60 Hz, 1A

0/0 0/1 0/2 0/3

T1/E1

IPLink 2884/2888 Quick Start Guide

2.3 Connecting to the PC and logging in via the Console port

To access the IPLink conﬁguration via the console port, connect the DB9-RJ45 adapter to the DB-9 serial

port on the PC or dumb terminal. Use the RJ45 straight-through cable between the adapter and the con-

sole port on the 2884/2888. (see

Figure 4

Figure 4.

Connecting to the PC’s Console port

Do NOT connect the device to the Ethernet LAN now.

On the PC, start a HyperTerminal session at 19200 bps, 8 data bits, 1 stop bit, and no parity.

Log into the unit using the following:

admin

password:

2.4 Changing the IP address

To change the IPLink’s IP address:

admin

, then use the following set of commands:

Trinity# configure

Trinity[config]# interface ethernet eth0

Trinity[eth-eth0]# no ip address 192.168.200.10

Trinity[eth-eth0]# ip address 192.168.1.1 netmask 255.255.255.0

2.5 Saving the IP address

To save the IPLink’s IP address:

admin

, then use the following set of commands:

Trinity# [eth-eth0]# end

Trinity# copy running-config startup-config

Trinity#

Connect to Console port

IPLink 2884/2888

192.168.200.10

DB-9 serial port

ETH 0/0 ETH 0/1 Console

RS-232

Power

~ 120-240V,50/60 Hz, 1A

0/0 0/1 0/2 0/3

T1/E1

RJ45 to DB-9 adapter

IPLink 2884/2888 Quick Start Guide

3.0 Connecting the T1/E1 ports

The 2884/2888 comes with either two or four T1/E1 ports.

Figure 5.

Connecting the T1/E1 ports

To connect the twisted pair cable to the T1/E1 port:

Attach the male connector of the twisted pair cable to the female connector on the IPLink.

Attach the other end of the cable to the serial connector on the local T1/E1 unit.

4.0 Additional information

For detailed information about conﬁguring and operating guidance, set up procedures and troubleshooting,

refer to the

IPLink 2884/2888 Getting Started Guide

and the

Administrator’s Reference Guide

on the enclosed

Patton CD-ROM or at

www.patton.com/manuals

. On the CD-ROM you will also ﬁnd numerous freeware and

shareware tools, including TFTP servers, Telnet clients, etc.

RS-232

Console

ETH 1ETH 0

Reset

T1/E1

120-240V, 50/60 Hz, 1A

Power

T1/E1

Ports 0-3

IPLink 2884/2888 Quick Start Guide

A.0 Compliance Information

A.1 Compliance

EMC:

•

FCC Part 15, Class A

•

EN55022, Class A

•

EN55024

Safety:

•

UL 60950-1/CSA C22.2 N0. 60950-1

•

IEC/EN60950-1

•

AS/NZS 60950-1

PSTN Regulatory:

•

FCC Part 68

•

CS-03

•

TBR 12 & 13 (E1)

•

AS/ACIF S016:2001 (E1)

A.2 CE Declaration of Conformity

Product Description:

IPLink 2884 and IPLink 2888

We certify that the apparatus identiﬁed above conforms to the requirements of Council Directive 1999/5/EC on

the approximation of the laws of the member states relating to Radio and Telecommunication Terminal Equip-

ment and the mutual recognition of their conformity.

The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above

directive is indicated by the CE sign on the device.

The signed Declaration of Conformity can be downloaded from

www.patton.com/certiﬁcations/

A.3 Authorized European Representative

D R M Green, European Compliance Services Limited.

Oakdene House, Oak Road , Watchﬁeld, Swindon, Wilts SN6 8TD, UK

The safety advises in the documentation accompanying the products shall be obeyed.

The conformity to the above directive is indicated by the CE sign on the device.

IPLink 2884/2888 Quick Start Guide

The information in this document is subject to change without notice. Patton Electronics assumes no

liability for errors that may appear in this document.

Trademarks statement

The term

IPLink

is a trademark of Patton Electronics Company. All other trademarks presented in this document

are the property of their respective owners.

Patton support headquarters in the USA

•

Online support: Available at

www.patton.com

•

E-mail support: E-mail sent to

[email protected]

will be answered within 1 business day

•

Telephone support: Standard telephone support is available ﬁve days a week—from

8:00 am

5:00 pm EST

(

1300

2200 UTC/GMT

)—by calling

+1 (301) 975-1007

•

Support via VoIP: Contact Patton free of charge by using a VoIP ISP phone to call

sip:[email protected]

•

Fax:

+1 (253) 663-5693

Alternate Patton support for Europe, Middle East, and Africa (EMEA)

•

Telephone support: Standard telephone support is available ﬁve days a week—from

8:00 am

5:00 pm CET

(

0900

1800 UTC/GMT

)—by calling

+41 (0)31 985 25 55

•

Fax:

+41 (0)31 985 25 26

Note

For additional service and support information, refer to the “Contacting Patton for assistance” chapter

of the

IPLink 2884/2888 Getting Started Guide

located on the CD-ROM that came with your IPLink or

available online at

www.patton.com

Warranty, Compliance Information

For warranty, trademark and compliance information, refer to the

IPLink 2884/2888 Getting Started Guide

located on the CD-ROM that came with your model or available online at

www.patton.com

In accordance with the requirements of council directive 2002/96/EC on Waste of Elec-

trical and Electronic Equipment (WEEE), ensure that at end-of-life you separate this

product from other waste and scrap and deliver to the WEEE collection system in your

country for recycling.

Autres manuels pour IpLink 2884

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Patton electronics Routeur réseau

Patton electronics

Patton electronics IM1/I4 Manuel utilisateur

Patton electronics

Patton electronics IM2RC/I-100B Manuel utilisateur

Patton electronics

Patton electronics SL4020 Manuel utilisateur

Patton electronics

Patton electronics SMARTNODE 4950 Manuel utilisateur

Patton electronics

Patton electronics 4630 Series Manuel utilisateur

Patton electronics

Patton electronics OnSite 2884 Manuel utilisateur

Patton electronics

Patton electronics ONSITE 2621 Manuel utilisateur

Patton electronics

Patton electronics OnSite 2800 Series Manuel utilisateur

Patton electronics

Patton electronics IPLink 2802 Manuel utilisateur

Patton electronics

Patton electronics Patton IPLink 2603 Manuel utilisateur

Patton electronics

Patton electronics SmartNode 5200 Manuel utilisateur

Patton electronics

Patton electronics SmartNode 4520 Series Manuel utilisateur

Patton electronics

Patton electronics ONSITE 2603 Manuel utilisateur

Patton electronics

Patton electronics 4520 Manuel utilisateur

Patton electronics

Patton electronics 3210 Manuel utilisateur

Patton electronics

Patton electronics 4520 Manuel utilisateur

Patton electronics

Patton electronics IPLink 2821 Manuel utilisateur

Patton electronics

Patton electronics DIAMONDLINK 3201 Manuel utilisateur

Patton electronics

Patton electronics IPLink 2823 Manuel utilisateur

Patton electronics

Patton electronics IpLink 2884 Manuel utilisateur

Patton electronics

Patton electronics SmartNode 4520 Series Manuel utilisateur

Patton electronics

Patton electronics PASSERELLES ROUTEURS VOIP 455X Guide de configuration

Patton electronics

Patton electronics 3060/V24 Manuel utilisateur

Patton electronics

Patton electronics IPLink 3210 Series Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité