Paradyne FrameSaver DSL 9783 CSU/DSU Manuel utilisateur

FrameSaverDSL 9783

Installation Instructions

Document Number 9783-A2-GN10-10

September 2000

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the

documentation for specific topics and print only what you need, reducing the waste

of surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com.

Select

Library

→

Technical Manuals

→

FrameSaver Frame Relay Devices.

Select the following documents:

Document Number Document Title

9000-A2-GB20

Configuring Frame Relay Service Over DSL

9783-A2-GB20

FrameSaver DSL 9783

User’s Guide

9783-A2-GL10

FrameSaver DSL 9783 Quick Reference

To order a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Upgrading a Basic Unit to SLV

Full SLV capability can be activated in basic FrameSaverDSL models at any time.

This is an optional feature that adds real-time and historical network performance

monitoring and SLA (Service Level Agreement) reporting capabilities to your

FrameSaver unit(s) and network. Simply order an Activation Certificate, providing the

model to be activated (9783), your OpenLaneSLM system license key number, and

the number of FrameSaver units whose SLV capability is to be activated.

The OpenLane SLM system, Release 5.3 or later, is required to schedule the activation

of the SLV feature and to manage the number of activations remaining on the

certificate. OpenLane also provides a Certificate Summary Report to assist you in the

management of the certificate.

When the Activation Certificate arrives, add the Activation Certificate Number to your

OpenLane SLM application’s database. Activations can occur at any time, for as many

units as desired, until no activations remain for the certificate. When ready to activate

units, select the units to be activated and schedule the activations. The activations

occur when scheduled, and OpenLane updates the certificate information.

Contact your sales representative for additional information.

Package Checklist

In addition to these instructions, your package should contain the following:

FrameSaver DSL unit

Power cord with a wall-mount 120 VAC power transformer

Tie wrap for power cord strain relief

DSL network access cable with 6-pin connector



FrameSaver DSL 9783 Quick Reference

(Document No. 9783-A2-GL10)

Be sure to register your warranty at www.paradyne.com/warranty.

Before You Install the FrameSaver DSL Unit

Make sure you have:

A dedicated, grounded power outlet that is protected by a circuit breaker within

6 feet of the FrameSaver unit

A clean, well-lit, and ventilated site that is free from environmental extremes

One-to-two feet of clearance for cable connections

A physical connection to the DSL network

An asynchronous terminal or PC (personal computer)

If desired, an operable Ethernet LAN (Local Area Network) connection for access

by an NMS (Network Management System)

Configuration information for the FrameSaver unit being installed or replaced

Appropriate cables:

— Ethernet cable

— Data port cable

— COM port-to-terminal or COM port-to-PC cable

Read the

Important Safety Instructions

beginning on page 16.

See the User’s Guide for additional information on:



Configuration Options



Troubleshooting



Technical Specifications



Connectors, Cables, and Pin Assignments

Cables You May Need to Order

If connecting to . . . Order a . . . Feature

Number Part

Number

Asynchronous

terminal or PC with

an 8-pin modular

interface/connector

Standard EIA-232

straight-through cable,

8-pin modular-to-DB25

(14 feet – 4.3 meters)

3100-F2-540 035-0314-1431

PC with a D-Sub9

interface/connector Standard EIA-232

straight-through cable,

D-Sub9-to-DB25

(14 feet – 4.3 meters)

3100-F2-550 035-0313-1431

External device

(e.g., a modem) Standard EIA-232-D

crossover cable

(14 feet – 4.3 meters)

9008-F1-550 035-0336-1431

DSL network

connection;

for use in the U.S.

RJ48C DSL Network Cable,

RJ48C-to-RJ48C/RJ49C

(20 feet – 6.1 meters)

3100-F1-500 035-0209-2031

Contact your sales representative to order cables.

Installing the Power Supply

Procedure

1. Insert the supplied power cord’s plug into the POWER jack.

ALM

TEST

ATM

DSL

NetworkSystem Port

9783-C

SLV

FrameSaver

®DSL

SDSL

00-16773-01

ETHERNET

COM

POWER

NET

Grounded

Power

Outlet

Tie Wrap

2. Plug the power supply into the grounded power outlet and check the LEDs.

If any LEDs light, you have power. If not, refer to

Troubleshooting

in the User’s

Guide for possible explanations.

3. Insert the self-mounting tie wrap in the top left hole (hole with a dark circle around

it) until it snaps securely into place. The tie wrap provides strain relief for the power

cord.

4. Loop the tie wrap around the power cord, thread it through the hole at the base of

the wrap, and pull it snugly around the cord.

Connecting to an Asynchronous Terminal or PC

A VT100-compatible asynchronous terminal or a PC providing VT100 terminal

emulation must be used to set up access to and management of the unit.

Procedure

1. Configure the terminal or PC so it is compatible with the FrameSaver unit:

– Baud Rate set to 19.2 kbps.

– Character length set to 8 data bits.

– Parity set to none.

– Stop bit set to 1.

– Flow Control set to None.

2. Insert the DB25 end of the EIA-232 cable into the FrameSaver unit’s COM port.

COM

Port

00-16685-01

ETHERNET

COM

POWER

NET

VT100

Terminal

or PC

3. Insert the other end of the cable into the terminal or PC.

4. Tighten the screws on each side of the connector to secure the cable.

5. Press Enter on the keyboard to display the Main Menu.

If the Main Menu does not appear, recheck the terminal or PC settings (see

Step 1), or press the Enter key. Refer to

Troubleshooting

in the User’s Guide for

other possible explanations.

Verifying that Self-Test Passed

To verify that the unit passed its self-test, go to the System and Test Status screen.

Main Menu

→

Status

→

System and Test Status

The results of the self-test appear directly under the screen title.

If any failure messages appear, reset the unit by disconnecting, then reconnecting the

power cord. The unit will perform the self-test again. If the failure reappears, call your

service representative for assistance.

A Quick Guide to Configuration

The FrameSaver unit should operate using the default (factory-set) configuration

options, with exception to the changes specified in these installation instructions. Refer

to the following table for help in navigating through the menus.

Press the . . . To . . .

Esc key Go back one screen or menu level. To see a visual

representation of the menu levels, see

Menu Hierarchy

the Quick Reference.

Tab key, or

Up (↑), Down (↓),

Left (←) and Right (→)

Arrow keys

Move the cursor from one menu item to the next.

Enter or Return key Complete the menu or option selection.

Spacebar Display the next available setting when changing a

configuration option. All the available settings for an

option appear at the bottom of the screen.

As an example, follow these steps to go to the Configuration Edit/Display menu so you

can start setting up the unit.

Procedure

To load a configuration for editing:

1. From the Main Menu, press the down arrow key twice so the cursor is on

Configuration.

2. Press Enter to display the Configuration menu. The Load Configuration From

menu appears.

3. Press Enter to select Current Configuration (the cursor is already on this

selection). The Configuration Edit/Display menu appears.

This sequence of steps would be shown as the menu selection sequence:

Main Menu

→

Configuration

Procedure

To save a configuration option change:

1. Press Ctrl-a to switch to the function keys area at the bottom of the screen.

2. Type sor S(Save) and press Enter. The Save Configuration To menu appears.

3. Press Enter again to save your changes to the Current Configuration.

4. Press Esc until the Configuration Edit/Display menu reappears to continue

configuring the unit.

Press Ctrl-a, type m(MainMenu), and press Enter to return to the Main Menu.

FrameSaver DSL Installation

An Easy Install screen is provided for custom configurations, but is not required for

normal installation.

Procedure

To use the Easy Install screen:

1. Select the Easy Install feature.

Main Menu

→

Easy Install

Easy Install Screen Example

main/easy_install 9783

Device Name: Node A 09/11/2000 00:01

EASY INSTALL

Node IP Address: 000.000.000.000 Clear

Node Subnet Mask: 000.000.000.000 Clear

TS Access: VPI,VCI 0 , 35

Create a Dedicated Network Management Link

Ethernet Port Options Screen

Network 1 DSL Line Rate (Kbps) AutoRate

Network 1 FRF.8 Encapsulation Mode Translation

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Save

2. Enter the Node IP Address and Node Subnet Mask.

3. Select Create a Dedicated Network Management Link, and enter a DLCI, VPI, and

VCI at the ensuing prompts. The Management Link that is created will be used by

the NOC to access the unit.

4. If the Ethernet port will be used, select the Ethernet Port Options Screen. Enable

the interface. Respond Yes to the prompt Would you like to set the

Node’s Default IP Destination to Ethernet? and configure the

following:

– Enter the IP address and subnet mask for the Ethernet interface.

– Enter the Default Gateway Address (the IP Address that will be used for packets

without a route).

– Press the ESC key to return to the Easy Install screen.

5. The Network 1 FRF.8 Encapsulation Mode default setting is Translation.

Encapsulation Translation used for carrying multiple upper layer user protocols

(frame relay PVC and ATM PVC).

Modify to Transparent to use SLV and multiplexed PVC functions.

6. Save the configuration.

7. Install the network cable (see

Connecting to the Network

on page 10).

8. Optionally, install the Ethernet cable (see

Connecting to the Ethernet

on page 11).

9. Install the DTE cable (see

Connecting to the DTE (Router or FRAD)

on page 12).

Physical installation of the unit is complete; the NOC can now remotely access the unit

for additional configuration.

Completing Setup of the Unit From the NOC

Procedure

1. Access the remote FrameSaver unit on the TS Management Link that was set up

at the remote site.

2. Ping the FrameSaver unit five times within five seconds. The unit automatically

provisions the TS Access VC.

3. Configure specific frame relay options, including the Data Port Frame Relay LMI

settings, and any other configuration options requiring input or changes from the

default settings.

4. Set the SNMP Traps configuration options (see

Configuring SNMP Trap Managers

and Traps

on page 13).

5. Verify the entire path from the remote unit to the NOC NMS is functioning (see

Verifying the End-to-End Path

on page 13).

6. Verify that data is being received (see

Checking That Data is Being Received

page 15).

7. Using the OpenLane VC Provisioning Application or Telnet, create all customer

VCs. This requires creation of the DLCI on the user data port, an internal DLCI, the

VPI/VCI on the DSL interface, specifying all parameters (CIR, Be, Bc), and cross

connecting the VPI/VCIs on the network interface to the DLCIs on the V.35 port.

8. Verify that all PVCs, including Management PVCs, are configured; and to see

whether the PVC is active or not (see

Checking PVC Connections

on page 15).

The FrameSaver installation is complete.

In the User’s Guide, see

Operation and Maintenance

for additional status information,

and

Troubleshooting

for additional troubleshooting information.

Connecting to the Network

Now that the FrameSaver unit is set up, the unit can be connected to the network.

Procedure

1. Use the supplied 6-pin cable for the DSL connection. Insert one end of the cable

into the DSL network interface.

2. Insert the other end of the cable into the modular jack labeled NET.

DSL

Network

00-16685-01

ETHERNET

COM

POWER

NET

3. Verify that the Network signal (DSL) LED is green. If so, the network interface is

set up correctly and is operational. If not, make sure both ends of the network

cable are properly seated.

4. Check Health and Status messages in the left column of the System and Test

Status screen.

Main Menu

→

Status

→

System and Test Status

Autres manuels pour FrameSaver DSL 9783 CSU/DSU

Table des matières

Autres manuels Paradyne Routeur réseau

Paradyne

Paradyne Hotwire 6341 Manuel utilisateur

Paradyne

Paradyne 1740 SHDSL Manuel utilisateur

Paradyne

Paradyne 1752 SHDSL Manuel utilisateur

Paradyne

Paradyne 1752 SHDSL Instructions d'utilisation d'origine

Paradyne

Paradyne Hotwire 6381 Manuel utilisateur

Paradyne

Paradyne 6211-I1 Manuel utilisateur

Paradyne

Paradyne iMarc 9550 DS3 Manuel utilisateur

Paradyne

Paradyne Hotwire 6212 Instructions d'utilisation d'origine

Paradyne

Paradyne iMarc DSL 9783 Manuel utilisateur

Paradyne

Paradyne framesaver 9623 Manuel utilisateur

Paradyne

Paradyne FrameSaver SLV 9664 Manuel utilisateur

Paradyne

Paradyne Hotwire 6301 Manuel utilisateur

Paradyne

Paradyne Hotwire 6212 Instructions d'utilisation d'origine

Paradyne

Paradyne 6382 Manuel utilisateur

Paradyne

Paradyne FrameSaver DSL 9788 Router Manuel utilisateur

Paradyne

Paradyne Hotwire 6212 Manuel utilisateur

Paradyne

Paradyne Hotwire 6351 Manuel utilisateur

Paradyne

Paradyne FrameSaver DSL 9783 CSU/DSU Manuel utilisateur

Paradyne

Paradyne Hotwire 6321 Manuel utilisateur

Paradyne

Paradyne JetFusion 2100 Series Manuel utilisateur

Paradyne

Paradyne 6212-I1 Manuel utilisateur

Paradyne

Paradyne 6211-I1 Manuel utilisateur

Paradyne

Paradyne FrameSaver FLEX 9623 Manuel utilisateur

Paradyne

Paradyne Hotwire 6212 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité