Paradox ESPRIT 728 ULT Mode d'emploi

ESPRIT 728 ULT QuickProgramming Guide

V2.10

To enter Programming Mode:

1. Press [ENTER]

2. Enter [2828]or [282828] (Enter key flashing), you are in the programming mode

3. Enter 3 digits ADDRESS number

4. Enter required DATA (Either enter 2 digits, 3 digits or ON / OFF relevant key)

Press [ENTER] to confirm or [CLEAR] to ignore

A=10, B=11/STAY, C=12/AWAY, D=BYP, E=MEM & F=TBL

Remember: After keyed in a required DATA, always press ENTER and then CLEAR, in order to let the

ENTER key flashing before proceed with entering the next 3 digits ADDRESS number.

Step 1: To program zone type

Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing

 ON relevant key [1 to 10] for ZONE features wanted

[key in 100][On key wants to be 24 HOUR zone]

[key in 104][ON key wants to be INSTANT zone]

[key in 108][ON key wants to be FOLLOW zone]

Note: Zones that are not selected in [100] to [108] automatically become delay zone.

[key in 096][ON key wants to be SILENT zone]

[key in 116][ON key wants to be STAY zone]

[key in 124][ON all zone to allow for bypass]

Example:

[key in 104], [ON key 2,3,4], meaning zone 2,3 & 4 are instant zone. Zone 1 is delay zone.

[key in 124], [ON 1,2,3, & 4], all zones are bypassable zone

Example:

[key in 116], [ON key 1, 3 & 4], meaning zone 1,3 & 4 are to be protected in stay arming, zone 2 is

bypassed.

Example:

[key in 100], [ON 3], meaning this zone 3 is a fire zone (24 hours zone)

Note: If zone 3 is enable as 24 hours zone, it is a FIRE zone

Example:

[key in 100][ON key 4], meaning zone 4 is 24 hours zone

[key in 096][ON key 4], meaning zone 4 is a silent zone (for panic button)

 ON relevant key [1 to 10] for USER features wanted

[key in 062][ON key 1 to 10], to allows user 1 to 10 in stay arming

[key in 068][ON key 1 to 10], to allows user 1 to 10 in away/ force arming

[key in 074][ON key 1 to 10], to allows user 1 to 10 to bypass zones

Note: By default, master code (as user 00) allows to force and stay arming.

Step 2: To program features

Press [ENTER] [2828] or [282828] , you are in the programming mode, ENTER key is flashing

[key in 088], [ON key 1,2,3,4,5,6,7,8, 9 &12] & [OFF key MEM]

[key in 090], [ON key 11 or/and 12], for keypad zone

[key in 049], [enter 060], for exit delay 60 seconds

[key in 050], [enter 060], for entry delay 60 seconds

[key in 053], [enter 003], for zone speed 45 ms. (for vibration sensor). 004 for 60 ms, 005 for 75 ms.

* Choose either Step 3A or 3B

Step 3A: To call CMS

Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing

[key in 038][press 10 then 10], contact ID format

[key in 086][ON key 7 & 12][ENTER][CLEAR], to call CMS phone.

[key in 090][ON key 10][ENTER][CLEAR], to enable Duress signal.

[key in 046][enter 001], for daily test

[key in 047][enter HHH], for hour

[key in 048][enter HHH], for minutes

Press [ENTER] [2828] or [282828] ,then [7], you are in the streamline programming mode, ENTER key

and 2ND are flashing.

[key in 04][enter phone number 1][ENTER][CLEAR], CMS phone number 1

[key in 06][enter phone number 2][ENTER][CLEAR], CMS phone number 2

[key in 08][enter 8888 8888][ENTER][CLEAR], account number

Note: to clear phone number, replace digit with [2ND]

Step 3B: To call Handphone

Press [ENTER] [2828] or [282828], youare in the programming mode, ENTER key is flashing

[key in 037][enter 7 then 2ND], waits for 15 rings call duration

[key in 038][enter TRBL then TRBL], pager format

[key in 086][ON key 7, 11 & 12][ENTER][CLEAR], to call phone 1 and phone 2 each ONE time

Note: if only [ON key 7 & 12, OFF key 11][ENTER][CLEAR], to call ONLY phone 1 one time

[key in 090][ON key MEM],

Press [ENTER] [2828] or [282828] ,then [7], you are in the streamline programming mode, ENTER key

and 2ND are flashing.

[key in 36][enter 33333333], to report zone 1 to 4

[key in 37][enter 33333333], to report zone 5 to 8 (program only if these zones are used)

[key in 38][enter 3333], to report zone 9 to 10

[key in 64][enter 2ND 2ND 333333][ENTER][CLEAR], to report panics

[key in 04][enter phone number 1][ENTER][CLEAR], handphone number 1

[key in 06][enter phone number 2][ENTER][CLEAR], handphone number 2

[key in 08][enter 8888 8888], account number

Others

Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing

1. Keypad setting

[key in 090][ON key 11][ENTER][CLEAR], for keypad zone 1

[key in 090][ON key 12][ENTER][CLEAR], for keypad zone 2

Select the jumper at the keypad, J1 OFF is keypad 1 and J1 ON is keypad 2.

Power down and on again after changing the jumper setting.

2. Keyswitch

[key in 086][ON key 3][ENTER][CLEAR], to enable keyswitch

Connect a 500 ohm resistor in series with AUX of keypad black wire & another wire connect to GRN of

keypad green wire.

500 ohm

resistor

3. Partitioning

[key in 086][ON key 8][ENTER][CLEAR], to enable partitioning

 ON relevant key [1 to 10] for ZONE to be at partition A or B

[key in 116], for zone Partition A

[key in 120], for zone Partition B

 ON relevant key [1 to 10] for USER to use in Partition A or B

[key in 062], to allows user 1 to 10 in Partition A

[key in 068], to allows user 1 to 10 in Partition B

Note: Once the system in Partition, Stay and Away/Force features are not available.

AUX AUX

GRN YEL

COM NO

keyswitch

4. Doubling method

Z1 Z2 Z4

728: [1/2] [3/4] [5/6] [7/8]

Zone 1,3,5 & 7 use 1K resistor, zone 2,4,6 & 8 use 2.2K resistor.

Keypad 1 as zone 9 and keypad 2 as zone10, need to put 1K resistor for keypad zones.

[key in 090][ON key 8][ENTER], to enable zone doubling

[key in 088], [ON key MEM][ENTER], disable EOL.

AND program zone type in Step 1.

Important note: Once the panel is in zone doubling, ALL zones are Normally Closed (NC).

Note: For zone doubling, the zone speed setting in address [053] should be [004] and above to avoid false

alarm caused by vibration sensors.

For Fire zone connections using 4-wire smoke detector

Once zone 3 is enable as FIRE zone in this zone doubling method:

[key in 090][ON key 1][ENTER], to disable zone 4.

[key in 100][ON key 3][ENTER], to program zone 3 as fire zone.

[key in 039], press [5][0], PGM to reset smoke detector

[key in 040], press [5][0], PGM to reset smoke detector

[key in 042], press [2ND][6], PGM to reset smoke detector

[key in 056], press [0][0][4], PGM to reset smoke detector

Note: Once zone 3 is a FIRE zone, zone 4 can not be used. Now, this zone 3 is a parallel wiring..

1 K

2.2

K1K

2.2

1 C 2 3 C

Z1 Z2 Z3 Z5 Z6

+

Note: The purpose of Relay is to reset smoke power. By pressing [CLEAR] and [ENTER] key together for

3 seconds.

For Fire zone connections using 2-wire smoke detector

Z2 Z3 Z4

Note: Maximum up to 5 pcs 2-wire smoke detector.

1 K

2.2

1 C 2 3 C

2-wire

Smoke

detector

(NO)

PGM AUX AUX

1 K

2.2

1 K

2.2

1 C 2 3 C

COM NO

Smoke

detector

PGM AUX AUX

Relay:12vDC

COM

1 K

2.2

2-wire

Smoke

detector

(NO)

728: [1/2] [3/4] [5] [7/8]

[key in 086][ON key BYP][ENTER], to enable zone 2-wire smoke detector to input 3 (as zone 5 in zone

doubling)

5. Utility

 Walk test

Press [ENTER] [2828] or [282828], you are in the programming mode, ENTER key is flashing

Press [ENTER][2828][8][CLEAR], to activate walk test mode.

Press [ENTER][2828][8][CLEAR], to de-activate walk test mode.

 To reset panel back to factory default

1. Remove the battery and switch OFF AC power.

2. Short the PGM and zone 1 terminal (labeled as 1) with a wire.

3. Power ON AC and connect the battery.

4. Wait for 10 seconds then remove the wire.

User functions

Normal function:

Type Action Display on 636 keypad

Arming / Disarm [Enter 4 digit user code] ARM is ON

Stay arming

(Stay zone will be bypassed) [STAY][4 digit user code] ARM & STAY are ON

Force arming

(Zone opened will be

bypassed, it consider arm

when it closed back)

[FORCE][4 digit user code] ARM is ON

Instant arming

(Delay zone becomes Instant) [STAY][4 digit user code], during the exit

delay, hold [STAY] for 3 seconds ARM & STAY are ON

Bypass [BYP][4 digit user code][ON the button

corresponding to the zone], then [ENTER]. BYP is ON

To Reset smoke detector after

an alarm on zone 3 Press [CLEAR] and [ENTER] together

Default master code is [4747] or [474747]

Important note: Stay zone features MUST enable in [Step 1], or else it will not function

One-Touch Arming:

One-touch REGULAR arming Press & hold the [key 0/10] button for 3 seconds

One-touch STAY arming Press & hold the [key 11/STAY] button for 3 seconds

One-touch INSTANT arming Press & hold the [key 11/STAY] button for 3 seconds, then again Press

& hold again the [key 11/STAY] button for 3 seconds

Panic function:

Press [1] & [3] at the same time, for AUDIBLE POLICE PANIC alarm.

Press [4] & [6] at the same time, for AUDIBLE MEDICAL alarm.

Press [7] & [9] at the same time, for FIRE alarm.

Change Master / create new user code:

Press [ENTER] [Master code – 4747] [ 2 digit section, 00 for master, 01 for user 1, 02 for user 2…], then

[4 digits new code][ENTER][ENTER]

E.g.: [ENTER][4747][00] [5678][ENTER][ENTER], where 00 is master user and 5678 is the new master code.

[ENTER][5678][02] [2222][ENTER][ENTER], where 02 is user 2 and 2222 is the new user code.

[ENTER][5678][48] [5354][ENTER][ENTER], where 48 is user 48 and 5354 is the Duress code.

To delete user number:

Press [ENTER] [Master code – 4747] [ 2 digit section, 02 for user 2, 03 for user 3…] [press

2ND][ENTER][CLEAR]

E.g.: [ENTER][4747][02][Press 2ND][ENTER][CLEAR], user 2 is deleted.

Chime zone:

On 636 keypad

To activate chime for zone Press & hold any button from [1] to [6] for 3 seconds.

(Button 1 for zone 1, button 2 for zone 2…..)

To deactivate chime for zone Press & hold any button from [1] to [6] for 3 seconds

(Button 1 for zone 1, button 2 for zone 2…..)

To activate/deactivate chime for

keypad zone Press & hold button [8]

To activate/deactivate Buzzer Mute Press & hold button [9]

Clear TBL 8 – Timer loss

Press [master code:4747] [MEM] [HH:MM][ENTER]

E.g.: Press [ENTER][4747][MEM] [15:35][ENTER], enter current time 3:35pm.

V2.10 29092005

Autres manuels pour ESPRIT 728 ULT

Table des matières

Autres manuels Paradox Système de sécurité

Paradox

Paradox IP150 Manuel utilisateur

Paradox

Paradox Magellan MG-6060 Manuel utilisateur

Paradox

Paradox MG-RTX3 Manuel utilisateur

Paradox

Paradox SP5500 Mode d'emploi

Paradox

Paradox SP6000 Mode d'emploi

Paradox

Paradox SR150 Manuel utilisateur

Paradox

Paradox ParaVox Manuel utilisateur

Paradox

Paradox MG5050+ Mode d'emploi

Paradox

Paradox MG5000 Manuel utilisateur

Paradox

Paradox Magellan MG5050E Manuel utilisateur

Paradox

Paradox SAFE PROTECTOR 950 Manuel utilisateur

Paradox

Paradox MG5000 Manuel utilisateur

Paradox

Paradox DGP2-641 Manuel utilisateur

Paradox

Paradox Digiplex EVO DGP2-640 Manuel utilisateur

Paradox

Paradox Imperial Digiplex Evo Manuel utilisateur

Paradox

Paradox MG-6130 Manuel utilisateur

Paradox

Paradox MG5000+ Manuel utilisateur

Paradox

Paradox Magellan DCT2 Manuel utilisateur

Paradox

Paradox Spectra SP Series Manuel d'instructions

Paradox

Paradox Paradox Manuel utilisateur

Paradox

Paradox STAY D MG5000 Manuel utilisateur

Paradox

Paradox Magellan K636 Manuel utilisateur

Paradox

Paradox Digiplex NE DGP-NE96 Mode d'emploi

Paradox

Paradox Spectra Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur