Paradox K32LCD+ Manuel utilisateur

Printed in Canada | 02/2019 PARADOX.COM

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty

Statement found on paradox.com. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

© 2019 Paradox Ltd. All rights reserved. Specifications may change without prior notice.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K32LCD+ Keypad

Quick Install Guide

The K32LCD+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K32LCD+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility Compatible with MG5000, MG5050, and Spectra SP series

V2.31 or higher and SP4000, SP65 V4.90 or higher.

Compliance EN50131-3 Grade 2; Environmental Class II

K32LCD+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab (#1)

at the top or bottom of the K32LCD+ backplate in order to for the cable to pass

through, refer to Figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 #6 screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in Figure 3. For EN installations, use the designated mounting holes (#3).

Figure 3: K32LCD+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Compatibility

The K32LCD+ is compatible with Magellan and Spectra Series control panels only.

Please refer to the Technical Specifications section for more details.

1

2 2

3

1

2

33

3

Cable pass-through

2

EN Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

3

Autres manuels pour K32LCD+

3

Autres manuels Paradox Système de sécurité

Paradox

Paradox IP150 Manuel utilisateur

Paradox

Paradox Digiplex DGP-848 Mode d'emploi

Paradox

Paradox Magellan K636 Manuel utilisateur

Paradox

Paradox Spectra SP Series Manuel d'instructions

Paradox

Paradox STAY D MG5000 Manuel utilisateur

Paradox

Paradox Digiplex EVO DGP2-640 Manuel utilisateur

Paradox

Paradox EVOHD+ Manuel utilisateur

Paradox

Paradox Digiplex EVO DGP2-640 Manuel utilisateur

Paradox

Paradox K656 Touch Sense Manuel utilisateur

Paradox

Paradox SP5500+ Mode d'emploi

Paradox

Paradox MG5000 Manuel utilisateur

Paradox

Paradox Magellan MG-6060 Manuel utilisateur

Paradox

Paradox StayD Series Manuel utilisateur

Paradox

Paradox 1686H Manuel utilisateur

Paradox

Paradox Paradox Manuel utilisateur

Paradox

Paradox IP100 Manuel utilisateur

Paradox

Paradox DGP2-641 Manuel utilisateur

Paradox

Paradox ParaVox Manuel utilisateur

Paradox

Paradox SPECTRA 1727 Manuel utilisateur

Paradox

Paradox Digiplex EVO Manuel utilisateur

Paradox

Paradox Imperial Digiplex Evo Manuel utilisateur

Paradox

Paradox Esprit 738 EXPRESS Manuel utilisateur

Paradox

Paradox SR150 Manuel utilisateur

Paradox

Paradox Magellan MG5050E Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur