Paradox ZX16D Manuel utilisateur

ZX16D - page 1

ZX16D: 16 Zone Expansion Module

Description

Driven by the V32 main controller’s 4-wire communication

bus (Multibus), the ZX16D is a DIN module with 16 inputs

for home automation or security with a status display for

each input. The module offers a test mode with 5 different

tests for input connectivity and operation, and full remote

firmware upgradeability.

With its DIN rail design, the module saves space, and

makes installation and wiring significantly faster and easier.

Features

• 16 zones or inputs

• Diagnostic Mode: Zone LEDs turn on/off to identify

assigned zone inputs, verify correct wiring (no EOL,

EOL without tamper, EOL with tamper) and perform a

walk test

• Remote firmware upgradeability via Multibus

• DIN rail design with on-board status display, and

removable terminals

• Programming via BabyWare software

• Bi-directional LOCATE feature from module to software

and vice versa

Overview

1) Module Locate feature activation (see "Bi-directional

Locate Feature” on page 3)

2) Multibus input status LEDs ("LED Feedback” on page 2)

3) Input status LEDs ("LED Feedback” on page 2)

4) Product serial number

A) 4-wire Multibus connection

B) Device inputs

Related Topics Specifications

Installation / Wiring

• DIN Rail Enclosures

• System Diagrams and Wiring Tips

• Wire Gauge Selection

Features

• Bi-directional Locate Feature (see page 3)

• Remote Firmware Upgrade (see page 3)

BabyWare

• BabyWare

Input voltage Typically 12Vdc (from Multibus)

Multibus 4 wires at up to 900m (3,000ft)

Current

consumption

68mA

Number of

device inputs

16 standard device inputs

Dimensions Standard DIN6: 11cm X 10cm X 6cm (4.2” X 4” X

2.5”)

Operating

Temperature

-10ºC to 50ºC

(14ºF to 122ºF)

DRAFT

Installation/Wiring: ??

Programming 1: ??

Programming 2: ??

Testing: ??

Total Tim e : ??

ZX16D - page 2

Wiring

LED Feedback

Test Mode

To facilitate installation and verify correct wiring, the ZX16D features five Test Modes. In order to use this feature, the

ZX16D module must be powered (Test Mode 1 requires a full bus connection).

To enter Test Mode, press the LOC button. The ZX16D enters Test Mode 1. Press the LOC button again to enter Test Mode

2, and so on. On the sixth press, the ZX16D will exit Test Mode.

1INPUT DEVICES

For input device wiring options, see ??

2EXTERNAL MODULE TAMPER SWITCH

Input 16 (N.C.) only.

ZX16D

INPUT

12 34CC

INPUT

56789

INPUT

10 11 12 13 14 15 16 CC

BUS INPUT

Detection Device

N.O. N.C. C +_

Imperial Multibus

ZX16D

INPUT

12 34CC

INPUT

56789

INPUT

10 11 12 13 14 15 16 CC

BUS INPUT

BUS RX TX STATUS

Green Green

flash

Green

flash

OK (communication in

progress)

Red

- - Short on GRN or YEL

- Green

Communication failure/

too many modules

Green

Bus lines reversed (GRN

/ YEL)

Red

flash

- - Bus power too low

Green

flash

Green

flash

Module locate mode

Blue

flash

- - Firmware upgrade in

progress

Input Status LEDs

Off = Input/zone closed

Red on = Input/zone open

Red flash = zone tamper

Mode Feature LED

Feedback Instructions

Mode 1* Input assignment RX flashes x 1 Entering Mode 1 illuminates all zones that have already been assigned in the control

panel.*This feature will be available on future versions.

Mode 2 EOL disabled

Tamper disabled

RX flashes x 2 Entering Mode 2 sets the ZX16D for: No EOL / No tamper. To verify correct EOL /

tamper wiring, open and close the zone and verify that the zone’s LED reacts

accordingly.

Mode 3 EOL enabled

Tamper disabled

RX flashes x 3 Entering Mode 3 sets the ZX16D for: With EOL / No tamper. To verify correct EOL /

tamper wiring, open and close the zone and verify that the zone’s LED reacts

accordingly.

Mode 4 EOL enabled

Tamper enabled

RX flashes x 4 Entering Mode 4 sets the ZX16D for: With EOL / With tamper. To verify correct EOL /

tamper wiring, open and close the zone and verify that the zone’s LED reacts

accordingly.

Mode 5 Zone test RX flashes x 5 Entering Mode 5 illuminates all connected zones. When a zone is triggered, the

corresponding zone LED will turn off, indicating correct wiring.

ZX16D - page 3

Bi-directional Locate Feature

Pressing and holding the LOC button for 3 seconds will initiate the Module Locate feature. When a Module Locate is

initiated, the module’s representation in the BabyWare software will flash and the module’s BUS, RX and TX LEDs will flash

at 1Hz to indicate that it is in locate mode. A module locate can also be initiated from the BabyWare software. From

BabyWare right-click the module’s representation and select Locate Physical. The module’s BUS, RX and TX LEDs will

flash. We highly recommend that after pressing locate and identifying the module, open the programming page and assign

the proper physical location label and the doors’ labels and locations. After complete connection, use the space provided

on the module to indicate the doors’ description.

Remote Firmware Upgrade

Work in progress...

The ZX16D is firmware upgradeable remotely via the V32 controller’s Multibus at 57.6Kbps. Using BabyWare connect to

the V32 account using any of the connection methods (direct connect, IP static, or IP DNS). Right-click the desired module

and select Upgrade (???). When communicating through the Internet, BabyWare will indicate whether the panel or any of

the bus modules have a newer firmware version available. A firmware upgrade for a single module or group of modules will

take usually less than 10 minutes, which keeps system downtime to a minimum.

Programming a ZX16D Module

1) When BabyWare is communicating with the V32 controller and a ZX16D

module is connected to the Multibus, it automatically appears in the Modules

display area. To view the Modules display area, click the Modules toggle

button. Alternatively, you may wish to add a module to BabyWare before the

module is physically connected to the system. Click the Add Item button.

2) To program a module that already appeared in the system, double-click the

module’s icon. The ZX16D Programming window opens.

3) From the ZX16D Programming window, configure input speeds and general

options. Click OK.

Figure 1: ZX16D Programming

ZX16D - page 4

Patents: One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069,

5077549 and RE39406 and other pending patents may apply. Canadian and international patents may also apply.

Trademarks: Paradox Imperial, MAMA, BabyWare, the M logo, and the triangle logo are trademarks or registered trademarks of Paradox Security

Systems Ltd. or its affiliates in Canada, the United States and/or other countries.

Certification: For the latest information on products approvals, such as UL and CE, please visit www.paradox.com.

Warranty: For complete warranty information on this product please refer to the Limited Warranty Statement found on the website www.paradox.com/

terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions.

PARADOX.COM

Printed in Canada - 03/2009

IZX16-EI00

Autres manuels Paradox Unité de contrôle

Paradox

Paradox IP150+ Mode d'emploi

Paradox

Paradox PCS300 Manuel utilisateur

Paradox

Paradox PCS265LTE Guide d'installation

Paradox

Paradox IP150 Mode d'emploi

Paradox

Paradox PCS265 LTE Guide d'installation

Paradox

Paradox PGM82 Manuel utilisateur

Paradox

Paradox IP150 Manuel utilisateur

Paradox

Paradox ZX82 Manuel utilisateur

Paradox

Paradox Digiplex EVO EVO192 V7.11 Mode d'emploi

Paradox

Paradox ZX32D Manuel utilisateur

Paradox

Paradox PCS250G Guide d'installation

Paradox

Paradox Spectra Digiplex NE APR3-HUB2 Manuel utilisateur

Paradox

Paradox TM40 Manuel utilisateur

Paradox

Paradox PCS265 Manuel utilisateur

Paradox

Paradox ZX82 Manuel utilisateur

Paradox

Paradox DGP-LSN4 V1.1 Mode d'emploi

Paradox

Paradox IP100 Manuel utilisateur

Paradox

Paradox VDMP3 Manuel utilisateur

Paradox

Paradox Digiplex EVO PRT3 Manuel d'installation

Paradox

Paradox PCS265 Guide d'installation

Paradox

Paradox VDMP3 Manuel utilisateur

Paradox

Paradox IP150+ Manuel utilisateur

Paradox

Paradox APR3-ZX4 Mode d'emploi

Paradox

Paradox Digiplex EVO ZX8D Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur