Panasonic SFP-1000SX Manuel utilisateur

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022

Product Outline

1000BASE-SX SFP Module and 1000BASE-LX SFP Module are SFP (Small Form-Factor

Pluggable) modules to be connected to a Panasonic Ethernet Switch’s SFP extension slot.

1000BASE-SX SFP Module 1000BASE-LX SFP Module

PN54021K PN54023K

IEEE802.3z

1000BASE-SX

IEEE802.3z

1000BASE-LX

SFF-8472 (Diagnostic Monitoring Interface)

850 nm 1310 nm

DC 3.3 V

0 to 50°C /20 to 80% RH (No dew condensation)

Specifications

Product name

Standards

Compatible cable

Optical wavelength

Operating voltage

Power consumption

Operating ambient

temperature/humidity

Fiber optic port

connector type

Accessories

MMF cable

LC connector (Duplex)

SMF, MMF cable

0.7 W max 0.9 W max

External dimensions

Mass (Weight) 17 g

9 mm (Height) x 14 mm (Width) x 57 mm (Depth)

(Excluding protruding sections)

Installation Guide (this document)

x 1(*)

＊Just the PN54021K-TH/PN54023K-TH has 1 Installation

Guide in Thai (at total of 2 guides)

Protection cap of the fiber optic port (Attached to the module)

x 1

Module No.

MMF: Multi Mode Fiber SMF: Single Mode Fiber

1. Securely connect the SFP Module to the SFP

extension slot of a Panasonic Ethernet Switch.

2. Remove the protective cap of the SFP

Module’s fiber optic port.

3. Connect a fiber optic cable that meets the

standards specified for the SFP Module.

4. Connect another SFP Module of the same

model number on the opposite end.

Installation

SFP extension slot

SFP Module

Fiber optic port Ethernet Switch

1. Unlatch the fiber optic cable and remove it from the SFP

Module.

2. Pull down the lever of the SFP Module 90 degrees as

shown in the figure to unlatch the SFP Module.

3. Pull out the SFP Module.

Removal

Lever C0913-20122 Printed in Japan

 Thank you for purchasing our product.

 This document provides important information about safe and proper

operations of this SFP Module.

 Please read the "Important Safety Instructions".

 Any problems or damages resulting from disassembly

of this SFP Module by customers are not covered by

the warranty.

 The instruction guide can be downloaded from the

following URL.

https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

PN54021K-TH/PN54023K-TH

PN54021K-MY/PN54023K-MY

PN54021Ｋ-ID/PN54023Ｋ-ID

PN54021K-SG/PN54023K-SG

PN54021K-NZ/PN54023K-NZ

Model No.

1000BASE-LX SFP Module (SFP-1000LX)

1000BASE-SX SFP Module (SFP-1000SX)

Installation Guide

This chapter contains important safety instructions for preventing bodily injury

and/or property damage. Please read carefully, and follow them at all times.

Do not look at the laser light.

Deviation could lead to visual impairment. (Class 1 Laser Product)

Do not disassemble and/or modify this SFP Module.

Deviation could lead to fire, electric shock, and/or equipment failure.

 Severity of bodily injury and/or property damage, which could result from incorrect

use of the SFP Module, are explained below.

 The following symbols are used to classify and describe the type of instructions to be

observed.

Important Safety Instructions

This symbol indicates safety instructions.

Deviation from these instructions could lead to

bodily injury and/or property damage.

CAUTION

This symbol indicates a potential hazard

that could result in serious injury or death.

WARNING

This symbol is used to alert

users what they must do.

This symbol is used to alert

users what they must not do.

WARNING

CAUTION

Handle the SFP Module carefully so that fingers or hands may not be

injured by its end connected to the Ethernet Switch or the SFP

extension slot of the Ethernet Switch.

Basic Instructions for the Use of This Product

For inspection and/or repair, consult the retailer.

Correctly and securely connect the SFP Module to the SFP extension slot of

a Panasonic Ethernet Switch.

Check the connector of the fiber optic cable for dirt and dust. If it is dirty,

be sure to clean it before connecting it to the fiber optic port.

Remove the SFP Module from the SFP extension slot before cleaning the

SFP Module.

Do not touch the metal terminal or place electrically-charged objects in the

proximity of the SFP Module. Static electricity could lead to breakdown.

Please use the SFP Module in locations where the ambient temperature is

within the range of 0 to 50°C.

Do not use the SFP Module in any condition where the specification limits

are exceeded.

Deviation could lead to malfunctions.

1. Panasonic will not be liable for any damage resulting from the operation not in

accordance with this document or the loss of communications, which may or

may not be caused by failure and/or malfunction of this product.

2. The contents described in this document may be changed without prior notice.

3. For any question, please contact the retailer where you purchased the product.

 The port LED of the Ethernet Switch to which the SFP Module connected is not lit.

Is the Ethernet Switch powered on?

Is the SFP Module securely connected to the target SFP extension slot of the

Ethernet Switch?

Is the connected port of the Ethernet Switch enabled?

Is the cable correctly connected to the target port?

Is a conforming cable used? Is the same type of SFP Module used on the

opposite end?

Is the equipment connected to the target port compliant with the specified

standards?

Ensure that 100BASE-FX or 10GBASE equipment is not connected.

Troubleshooting

If you find any problem, please take the following steps to check.

Ce manuel convient aux modèles suivants

Autres manuels Panasonic Unité de contrôle

Panasonic

Panasonic SF-AC Manuel utilisateur

Panasonic

Panasonic BMED500 - CAMERA CONTROL UNIT Manuel utilisateur

Panasonic

Panasonic SC-GU3-EU Manuel utilisateur

Panasonic

Panasonic AW-RC600 Manuel utilisateur

Panasonic

Panasonic KX-NT307 Manuel utilisateur

Panasonic

Panasonic CF-BAD02GU Manuel utilisateur

Panasonic

Panasonic CA-RC3000EU Manuel utilisateur

Panasonic

Panasonic SF-C14EX-01 Manuel utilisateur

Panasonic

Panasonic CF-BAC04GU Manuel utilisateur

Panasonic

Panasonic GPKS162CUD - CONTROL UNIT Manuel utilisateur

Panasonic

Panasonic WX-CC411 Manuel utilisateur

Panasonic

Panasonic GPKS162CUD - CONTROL UNIT Manuel utilisateur

Panasonic

Panasonic 10GBASE-SR SFP+ Manuel utilisateur

Panasonic

Panasonic AK-MSU1000G Manuel utilisateur

Panasonic

Panasonic CZ-RCC5 Manuel utilisateur

Panasonic

Panasonic FZ-VCN55 Series Manuel utilisateur

Panasonic

Panasonic ELC500 Manuel utilisateur

Panasonic

Panasonic PAN1781 Manuel utilisateur

Panasonic

Panasonic AFP0HC32ET Manuel utilisateur

Panasonic

Panasonic AK-HCU250P Manuel utilisateur

Panasonic

Panasonic PAN1026A Manuel du propriétaire

Panasonic

Panasonic PAN1326C Mode d’emploi

Panasonic

Panasonic AJRC10G - REMOTE CONTROL UNIT Manuel utilisateur

Panasonic

Panasonic VBHN240SE10 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur