Panasonic CF-VEBC21Un Manuel utilisateur

Printed in Japan

SH1212-0

DFQW5685ZA

ENGLISH OPERATING INSTRUCTIONS

DEUTSCH

BEDIENUNGSANLEITUNG

FRANÇAIS

INSTRUCTIONS D’UTILISATION

日本語取扱説明書

保証書付き（日本国内向け）

・取扱説明書をよくお読みのうえ、正しく安全にお使いください。

・ご使用前に「安全上のご注意」（50 ページ）を必ずお読みください。

・



保証書は「お買い上げ日・販売店名」などの記入を確かめ、取扱説明書とともに大切に保管してください。

Port Replicator / Portreplikator /

Duplicateur de ports /

ポートリプリケーター

Model No. CF-VEBC21U

Downloaded from ManualsNet.com search engine

ENGLISH

Contents

Safety Precautions ............................................................ 2

Regulatory Information ..................................................... 3

Introduction ........................................................................ 5

Handling Care..................................................................... 6

Names and Functions of Parts......................................... 7

Connecting / Disconnecting ............................................. 8

Using the External Display ............................................. 10

Using the Drive................................................................. 11

Troubleshooting............................................................... 14

Specifications .................................................................. 15

To reduce the risk of injury, loss of life, electric

shock, fire, malfunction, and damage to equipment

or property, always observe the following safety

precautions.

Explanation of symbol word panels

The following symbol word panels are used to clas-

sify and describe the level of hazard, injury, and

property damage caused when the denotation is

disregarded and improper use is performed.

WARNING

Denotes a potential hazard that could result in serious

injury or death.

CAUTION

Denotes a hazard that could result in minor injury.

The following symbols are used to classify and describe

the type of instructions to be observed.

These symbols are used to alert users to a spe-

ciﬁc operating procedure that must not be per-

formed.

This symbol is used to alert users to a speciﬁc

operating procedure that must be followed in

order to operate the unit safety.

WARNING

If a Malfunction or Trouble Occurs, Immedi-

ately Stop Use

If a Malfunction Occurs, Immediately Unplug

the AC Plug and Remove the Unit From This

Product

•This product is damaged

•A foreign object is inside this product

•Smoke is emitted

•An unusual smell is emitted

•Unusually hot

Continuing to use this product while any of the

above conditions are present may result in ﬁre or

electric shock.

•If a malfunction or trouble occurs, immediately

unplug the AC plug and remove the unit from

this product. Then, contact your technical sup-

port ofﬁce for repair.

Do Not Touch This Product In a Thunderstorm

If Connected with the AC Cable or Any Other

Cables

Electric shock may result.

Do Not Place Containers of Liquid or Metal

Objects on Top of This Product

If water or other liquid spills, or if paper clips,

coins, or foreign matter get inside this product,

ﬁre or electric shock may result.

•If foreign matter has found its way inside,

immediately unplug the AC plug and remove

this product from the unit. Then contact your

technical support ofﬁce.

Do Not Connect the AC Adaptor to a Power

Source Other Than a Standard Household AC

Outlet

Otherwise, a ﬁre due to overheating may result.

Connecting to a DC/AC converter (inverter) may

damage the AC adaptor. On an airplane, only

connect the AC adaptor/charger to an AC outlet

speciﬁcally approved for such use.

Safety Precautions

Downloaded from ManualsNet.com search engine

CAUTION

Do Not Place This Product on Unstable Sur-

faces

If balance is lost, this product may fall over or

drop, resulting in an injury.

Do Not Keep This Product Wherever There

is a Lot of Water, Moisture, Steam, Dust, Oily

Vapors, etc.

Otherwise, possibly resulting in ﬁre or electric

shock.

Do Not Leave This Product in High Tempera-

ture Environment for a Long Period of Time

Leaving this product where it will be exposed to

extremely high temperatures such as near ﬁre or

in direct sunlight may deform the cabinet and/or

cause trouble in the internal parts. Continued use

in such a resulting condition may lead to short-

circuiting or insulation defects, etc. which may in

turn lead to a ﬁre or electric shocks.

Use Only the Speciﬁed AC Adaptor With This

Product

Using an AC adaptor other than the one supplied

(supplied with the unit or one sold separately as

an accessory) may result in a ﬁre.

Do Not Connect a Telephone Line, or a Net-

work Cable Other Than the One Speciﬁed,

Into the LAN Port

If the LAN port is connected to a network such as

the ones listed below, a ﬁre or electric shock may

result.

•Networks other than 1000BASE-T,

100BASETX or 10BASE-T

•Phone lines (IP phone (Internet Protocol Tele-

phone), Telephone lines, internal phone lines

(on-premise switches), digital public phones,

etc.)

Do Not Look Into the CD/DVD Drive

Looking directly at the internal laser light source

may result in damage to eyesight.

Do Not Use Discs That Are Cracked or De-

formed

Because the discs rotate at high speeds, dam-

aged discs may break apart causing injury.

•Discs that are not round and discs that have

been repaired using adhesives are similarly

dangerous, and so should not be used.

Regulatory Information

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private house-

holds) This symbol on the products and/or accompanying documents means that used electrical and electronic prod-

ucts should not be mixed with general household waste.

Please dispose of this item only in designated national waste electronic collection schemes, and not in the

ordinary dust bin.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-

tion.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of

disposal. 36-E-1

Do not use other than the speciﬁed AC Adaptor (Model No. CF-AA6413C).

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EX-

POSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

The following label is put on the bottom of the Port Replicator. 12-E-1

Downloaded from ManualsNet.com search engine

For U.S.A.

Federal Communications Commission Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.●

Increase the separation between the equipment and receiver.●

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●

Consult the Panasonic Service Center or an experienced radio/TV technician for help.●

Warning

To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral.

Also, any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

This device is Class B verified to comply with Part 15 of FCC Rules when used with Panasonic Notebook Computer.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675) 6-M-1

For Canada/Pour le Canada

Canadian ICES-003

CAN ICES-003(B) / NMB-003(B)

7-M-3

For Europe

Interface Cable

Use of an interface cable longer than 3 m {9.84 feet} is not recommended. 11-E-1

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that this Port Replicator is in compliance with the essential re-

quirements and other relevant provisions of EU Council Directives.”

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany 18-E-0

For India

For the purpose of recycling to facilitate effective utilization of resources, please return this product to a

nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when dis-

posing of this product.

Please see the Panasonic website for further information on collection centers, etc.

http://www.panasonic.co.in/wps/portal/home 68-M-1

Regulatory Information

Downloaded from ManualsNet.com search engine

Thank you for purchasing the port replicator for the Panasonic CF-C2 notebook computer series*1.

In combination of the computer and this product, you can connect variety of devices.

*1 This port replicator cannot be used for other models.

Accessories



Introduction

Operating Instructions (This book)............................................................................1

DVD Drive Utility Disc

*2 ................................................................................................1

*2 This contains the programs used to install “Roxio CreatorTM LJB (hereafter, Roxio Creator LJB)” and

“PowerDVDTM (OEM Version) (hereafter, PowerDVD)”.

About software overview and installing the software, see “Software Guide” in “DVD Drive Utility Disc”.

See “Software Guide” in “DVD Drive Utility Disc”:

1.Log on to Windows as an administrator.

2.Set “DVD Drive Utility Disc” in the drive.

3. Windows 8

ARight-click any empty location on the Start screen and click [All apps] on the toolbar.

BClick [Run] under “Windows System”, input “x:\Manual\index.hta”*3 then click [OK].

Windows 7

Click (Start) and input “x:\Manual\index.hta”*3 in [Search programs and files] and press

Enter

*3 “x” is the drive letter. You can change the letter to suit your preference.

NOTE

This manual explains the procedure for default settings. The procedure may differ according to the set-

●

tings.

Windows 8

●indicates Windows®8 Operating System.

Windows 7

●indicates Windows®7 Professional Operating System.



●: Page in these Operating Instructions.

●: Reference to the on-screen manuals of the computer.

Some illustrations are simplified to help your understanding and may look different from the actual unit.

●

Microsoft®and Windows®are registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Roxio Creator is a trademark or registered trademark of Corel Corporation in the United States and/or other

countries.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their

respective own companies.

Downloaded from ManualsNet.com search engine

Handling Care

Drive Handling Care



Do not expose the drive to excessive smoke that

●

may leave a residue, e.g., oil smoke, or tobacco

smoke. Doing so can shorten the life of the drive

lens.

We recommend cleaning the drive lens with an

●

air puffer used for camera lenses.

(Do not use any spray-type of lens cleaning prod-

ucts.)

When opening/closing the tray

When the computer is on, use the eject button

●

(page 11) or eject through Windows.

When inserting or removing a disc, be careful

●

not to touch the lens and other parts of the laser

pickup.

Do not leave the tray open and do not touch the

●

lens and other parts of the laser pickup.

The laser pickup and disc can become dusty in

some conditions. It may cause malfunction in

reading or writing.

Do not apply excessive force to the tray in the

●

open position.

Never insert a foreign object such as a paper clip

●

into the drive.

Doing so may cause malfunction.

Do not place items other than discs on the tray.

●

While the drive is being accessed

Do not open the tray or move the Port Replicator

●

while the drive is being accessed.

Doing so could cause the disc to shift position

and this may damage the disc, or cause the drive

to malfunction.

In addition, after running an application involv-

ing access to a disc, close the application before

opening the tray.

Do not apply excessive shocks or disconnect/

●

connect cables, cards, etc.

Doing so may result in read/write errors.

Disc Handling Care



Before using a disc, carefully read the operating/

handling instructions and package of the disc.

If the discs are not handled appropriately, they may

become dirty or scratched. Furthermore the writing

speed may get slower and the data may not be cor-

rectly written on or read from the disc. Other dam-

age may cause a drive failure.

Use discs with the appropriate write/rewrite

●

speeds.

Do not touch the disc surface (the side with no

●

printing).

Keep the disc surface clean and free from dirt,

●

dust, fingerprints and scratches.

Do not write on the surface of the disc with a

●

ballpoint pen or other writing instrument.

Do not drop, bend, or place heavy objects on top

●

of discs.

Do not place or store discs in locations exposed

●

to heat, direct sunlight, humidity or dust.

If a disc is brought from a cold to a warm loca-

●

tion, condensation may form on the disc.

Wipe off the condensation using a soft, dry, lint-

free cloth before using the disc.

Wait until the condensation dries.

When not using discs, keep them in their protec-

●

tive cases or cartridges.

To clean discs

Wipe discs with a dry, soft cloth from the center

toward the edge.

If discs get very dirty, wipe with a moist, soft cloth

from the center toward the edge, then wipe again

with a dry cloth to take up remaining moisture.

Correct Incorrect

Use the recordable/rewritable disc cleaner to

clean these discs.

Do not use a cloth, CD cleaners or any other such

cleaners under any circumstances.

How to hold a disc

Correct Incorrect

Downloaded from ManualsNet.com search engine

Names and Functions of Parts

The port replicator allows your peripheral devices to function exactly as if they were connected directly to

the computer. (Refer to “Description of Parts” in the “Operating Instructions” accompanying the computer.)

CAUTION

Do not touch the port replicator connector, pins or terminals of the port replicator.

●

Rear



Security Lock: LOCK

A Kensington cable can be connected.

For more information, read the manual

that comes with the cable.

USB 3.0 Ports:

These can be used only when

the AC adaptor is connected.

VGA Port:

Connect the external display compatible with analog

interface.

The HDMI2 port and VGA port cannot be used

simultaneously. If cables are connected to both the

HDMI2 and VGA ports, the VGA port will have priority.

HDMI Ports:

Left: HDMI1 port

Right: HDMI2 port

Connector for HDMI compatible digital display.

It is not compatible with the analog display.

The display specifications of the maximum resolution, etc. that

can be output differ according to the specifications of the

device connected.

For details, refer to the specifications of the device connected.

The HDMI2 port and VGA port cannot be used simultaneously.

If cables are connected to both the HDMI2 and VGA ports, the

VGA port will have priority.

LAN Port:

DC-IN Jack:

DC IN 15.6V

Front/Right Side



Port Replicator Connector

This connects to the

Expansion Bus Connector on

the bottom of the computer.

Latch CD/DVD Drive

Lever

Slide the lever all the way

back to release the computer.

Downloaded from ManualsNet.com search engine

Connecting / Disconnecting

CAUTION

Do not connect or disconnect the port replicator while the computer is powered on or in the sleep or

●

hibernation mode.

Connecting



Power off the computer, and disconnect all cables from the com-A

puter.

Connect the AC adaptor that came with the computer to the portB

replicator and plug the other end into an AC outlet.

CAUTION

Refer to the “Operating Instructions” accompanying computer for information on proper handling of

●

the AC adaptor and AC cord.

Align the front of the computer with the latch on the port replica-C

tor, and gently place the computer on the port replicator.

CAUTION

Do not connect the computer to a port replicator while the AC

●

adaptor or other cables is connected to the computer.

Do not attempt to make connections if there is any object

●

between the computer and the port replicator. Doing so could

damage the computer and the ort replicator.

Push the areas indicated by the arrows to set the computer.D

CAUTION

While connecting the computer to the port replicator:

●

Do not attempt to move the port replicator.•

Do not open the display wider than necessary (180° or more), and do not apply excessive pressure to•

the LCD.

It is impossible to remove the battery pack.•

If the computer malfunctions while the port replicator is attached, disconnect the port replicator and

●

check to see if the computer operates normally. If the computer operates normally, the port replicator

may be malfunctioning. Contact your technical support office.

Disconnecting



Power off the computer and close the display.A

Slide the lever all the way back.B

The computer’s connector disengages the port replicator connector of the

port replicator.

Lift up the computer to remove it from the port replicator.C

Downloaded from ManualsNet.com search engine

CAUTION

If the port replicator is connected to the computer, connect the LAN cable and VGA cable to the jack and

●

port on the port replicator. Do not use the LAN port and VGA port on the computer.

Do not connect/disconnect peripheral devices in sleep or hibernation.

●

If devices connected to USB 3.0 ports do not operate, confirm the AC adaptor is connected to DC-IN of

●

the port replicator.

When using the USB port, make sure that [Port Replicator USB Port] is enabled in the [Advanced] menu

●

of the Setup Utility.

For more information about the settings and preparations of the peripheral devices, refer to the periph-

●

eral devices’ own operating instructions.

When connecting the external display to either of the ports, lines or letters may blur. In that case, lower

●

the resolution.

Downloaded from ManualsNet.com search engine

Refer to Reference Manual “External Display”.

Switching the Display



To switch using the keys

PressA key + or + .

Click the display mode.B

To switch using the display driver

Right-click the desktop, and click [Graphics Properties].A

Click [Multiple Displays].B

Select the display in [Operating Mode], and click [Apply].C

Click [OK].D

If necessary, click [General Settings], set the color depth, resolution, etc., and click [OK].E

Windows 7

When 2 external displays compatible with analog interface and HDMI1 respectively are connected at the

same time and when [Display] is set to [External Monitor] in the Setup Utility, the display compatible with

HDMI will take priority over the display compatible with analog interface.

NOTE

When external displays are connected to both the VGA port and HDMI1 port, if you select [Clone Dis-

●

plays] or [Extended Desktop], 3 displays are shown for [Primary Display] and [Second Display] respec-

tively under [Multiple Displays]. An HDMI compatible display or analog display are indicated as [Digital

Television] and internal LCD as [Built-in Display].

When switching from the analog display to the internal display, the following message may appear on

●

the analog display.

Out of range•

Switching the audio output destination while connecting the HDMI



compatible display

Windows 8

A

Open the Control Panel, and then click [Hardware and Sound] - [Sound].

To open the Control Panel, proceed as follows on the [Start] screen.

1.Right-click any empty location on the Start screen.

2.Click [All Apps] on the toolbar.

3.Click [Control Panel] under “Windows System Tools”.

Windows 7

Click (Start) - [Control Panel] - [Hardware and Sound] - [Sound].

Select the audio output destination.B

Click [Set Default] and click [OK].C

NOTE

When connecting an HDMI compatible display without speakers mounted, audio may not be output from

●

this unit and the HDMI compatible display. Follow the above steps to change the setting so the audio is

output from this unit’s speaker.

Using the External Display

Downloaded from ManualsNet.com search engine

Table des matières

Langues :

Autres manuels Panasonic Matériel informatique

Panasonic

Panasonic 2SC4691G Manuel utilisateur

Panasonic

Panasonic TY-SB01DL Manuel utilisateur

Panasonic

Panasonic MN1872423 Manuel utilisateur

Panasonic

Panasonic AV-HS04M2 Manuel utilisateur

Panasonic

Panasonic 2SA2161G Manuel utilisateur

Panasonic

Panasonic UP0KG8D Manuel utilisateur

Panasonic

Panasonic FZ-VCN401 Manuel utilisateur

Panasonic

Panasonic 2SA2079 Manuel utilisateur

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Panasonic

Panasonic TY-FB10HMD - Monitor Terminal Expansion... Guide de l'utilisateur

Panasonic

Panasonic TY-FB11DD - Monitor Terminal Expansion Board Manuel utilisateur

Panasonic

Panasonic Panaboard UB-5310 Manuel utilisateur

Panasonic

Panasonic 2SC3312 Manuel utilisateur

Panasonic

Panasonic Panaboard UB-5315 Manuel utilisateur

Panasonic

Panasonic AV-HS04M7D Manuel utilisateur

Panasonic

Panasonic FP7 Series Manuel utilisateur

Panasonic

Panasonic KX-TDA6181X Manuel utilisateur

Panasonic

Panasonic PAW-SERVER-PKEA-1 Manuel utilisateur

Panasonic

Panasonic AY-PB2001 Manuel utilisateur

Panasonic

Panasonic UB-5325 Manuel utilisateur

Panasonic

Panasonic 2SA1738 Manuel utilisateur

Panasonic

Panasonic ET-MDNFB10 Manuel utilisateur

Panasonic

Panasonic AJ-YA931G Manuel utilisateur

Panasonic

Panasonic TY-FB7HD Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur