Panasonic Y5B Manuel utilisateur

ACCTF15E-3

2015.07

industrial.panasonic.com/ac/e/

Y5B and Y5BW

FPC connector

Operation manual

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 1 -

Contents

01.Introduction.............................................................................................2

02.Precautions for product design ...............................................................3

03.Board arrangement and precautions for using a fold and cut board .......4

04.Precautions for FPC insertion and removal ............................................5

05.Handling methods and precautions ........................................................7

06.Precautions for board/metalmasking/FPC design.................................10

07.Precautions for mounting and reflow soldering.....................................13

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 2 -

01. Introduction

Y5B and Y5BW connectors are low-profile, space saving and back-lock type with

terminal pitch of 0.5 mm, height of 1.0 mm, and width of 3.20 mm.(3.70mm

including lock lever)

These connectors are designed for PCB-to-FPC connections of mobile devices and

various digital devices. For this purpose, the size and thickness of the molded part

has been further reduced. Please select the types best suited to the conditions of use

and read this document before designing a product and starting production.

■Product Features

・

Low-profile and space saving back lock improving

lever workability

・

Mechanical design freedom achieved by top and bottom

double contacts

・

Having small number of contacts

(Y5B: from 4 pins, Y5BW: from 2 pins)

・

Wiring patterns can be located underneath the connector

・

Work process can be reduced by delivering the

connectors with their levers opened

・

Y5BW: Able to hold FPC temporarily and having higher

FPC holding force

Before FPC insertion and lever open

■

Specification

・

Contact : 0.5mm Pitch, double sided contact

・

Height :1.0mm

・

Width Y5B: 0.5mm(N-1)+2.5mm

Y5BW: 0.5mm(N-1)+3.5mm

・

Depth : 3.20mm

（

3.70mm including lever

）

・

Number of pins Y5B: 4 to 50 pins

Y5BW: 2 to 48 pins

・

Contact effective length : 1.00mm

・

Suitable FPC :0.30±0.03mm

Au Plating

1.00

Inserted FPC and locked lever

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 3 -

02. Precautions for product design

02-1. Considerations in mechanical design

1) Position of the connector on a board

Rigid boards tend to warp in a direction perpendicular to the rolling direction

during the production process. Poor soldering may occur depending on the

warping direction. Make sure to place the connector in a direction which reduces

warpage.

2) Position of the connector in the mounting process

Please design multi-pins connector layouts that do not require a swinging

movement during pickup and mounting.

In many cases, deviation of the connector mounting position is caused by the

inertia of the swinging movement of the mounter. A layout that does not require

swinging is thus required.

● Example of a connector layout requiring a swinging movement in the mounting process

Make sure that connector positioning and FPC length are appropriate to

prevent diagonal insertion of the FPC. FPC may become loose due to drop

impact and vibration depending on size, weight, and turning of FPC board.

Carefully check the FPC condition in the device. Design the device to prevent

the FPC from detaching.

Poor soldering can be reduced by

designing a mounting pattern to place

the connector in a lateral direction.

Tends to warp in the

manufacturing (lateral) direction.

This space causes poor soldering.

△

○

Pickup and mounting positions

Connector

Embossed tape

Motherboard

Rotary inertia is applied

No rotation inertia

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 4 -

03. Board arrangement and precautions

for using a fold and cut board

(1)Please design and pay attention to the distance from the board edge to the pattern.

When cutting the v-cut board, do not give an excessive stress to the connector,

which risks damaging the connector.

(2)Please design and pay attention to the range of lever movement and the distance

from the housing PCB.

(1.00)

(1.76)

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 5 -

04. Precautions for FPC insertion and removal

1. Do not touch the lever or apply any load to the lever without inserting an FPC.

Especially do not close the lever without inserting an FPC.

The terminals may be deformed by interference of contacts and the FPC,

because if touching or applying any load to the lever, contact deflection occurs.

Also the lever may come off and FPC insertion force may increase.

2. These connectors are of the back lock type, which has the FPC insertion section

on the opposite side of the lever. Be careful not to make a mistake in the FPC

insertion position or the lever opening/ closing position. Otherwise, a contact

failure or connector breakage may occur.

3.These connectors have top and bottom double contacts. Do not insert an FPC

upside down. Inserting an FPC in a direction opposite to that you intended may

cause an operation failure or malfunction.

4. Insert the FPC when the lever is opened vertically as the same state as it delivered .

5. Completely insert the FPC horizontally. An FPC inserted at an excessive angle

to the board may cause the deformation of metal parts, FPC insertion failures,

and FPC circuit breakages.

Without FPC

FPC insertion guide

FPC

Lever should be closed after FPC insertion.

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 6 -

6. After FPC insertion, do not apply an excessive load to the lever in the opening

direction beyond its open position; otherwise, the lever may be deformed or

removed

7. Do not apply an excessive load to the lever in a direction perpendicular to the

lever rotation axis or in the lever opening direction; otherwise, the terminals

may be deformed, and the lever may be removed.

8. When using FPC bending, please pay attention to precautions below;

otherwise, in some conditions it may cause conduction failure, connector breakage,

unlocking lever or FPC disconnection..

・Design so that a load is not applied to connector directly by FPC bending.

・Avoid sharp FPC bending at the root of FPC insertion part.

・Design so that a load is not applied to the part of FPC bending

・If there might be a load on FPC, please fix the FPC

FPC

Sharp bend

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 7 -

05. Handling methods and precautions

1.1 This product has top and bottom

double sided contacts.

Pay attention to the face of

copper foil, and insert the FPC

to the full depth of the connector.

* Before FPC insertion, do not touch

the lever (Do not apply external force)

* Insert an FPC in the direction

parallel to the board

* This connector is of the back lock type,

which has the FPC insertion section on

the opposite side of the lever.

Be careful not to make a mistake in the

FPC insertion position or the lever position.

* Insert an FPC so that

it is vertical to the connector.

* Insert an FPC to the full depth of the

connector without altering the angle.

Designed for top contact：Copper foil is top

Designed for bottom contact ：Support plate is top

1.1 Inserting the FPC

Precautions

FPC

Angle to the board

Incomplete insertion

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 8 -

1.2 To close the lever, after inserting the

FPC to the full depth of the connector,

turn down the lever by pressing

the entire lever or both sides of

the lever with the ball of finger.

* When it is a large number of pins,

please handle with the both hands

* Do not open/close the lever without

an FPC inserted; otherwise, the terminals

may be deformed, and the FPC insertion

force may increase.

* Do not apply an excessive load to the

lever in a direction perpendicular to the

lever rotation axis or in the lever opening

direction; otherwise, the terminals may be

deformed, and the lever may be removed.

* Do not apply a load to the lever

unevenly, such as to an edge only,

when closing the lever of

large number of pins; otherwise,

the lever may be deformed

* Do not close the lever forcefully with

something sharp tool, otherwise,

the lever may be deformed.

* When closing a lever and/or after closing a lever,

please prevent an excessive load from

being applied in the arrow directions

shown on the figure to the right.

An excessive load could result

it terminal deformation, or a broken lever.

1.2 How to close the lever

Precautions

Both hands when

having large

number of pins

Guide for Getting FPC connector Y5B and Y5BW

Panasonic Corporation

industrial.panasonic.com/ac/e/

©Panasonic Corporation 2015

ACCTF15E-3 201507

- 9 -

* After an FPC is inserted, do not pull the FPC

forcefully or do not apply an excessive load.

* When using FPC bending, please pay attention

to precautions below;

・Avoid sharp FPC bending at the root of FPC insertion part.

・Design so that a load is not applied to the part of FPC bending

・If there might be a load on FPC, please fix the FPC.

1.3 Remove the FPC at parallel with

the lever fully opened.

* Do not remove the FPC when

the lever is closing; otherwise,

the product may break or

cause a faulty connection.

* When opening the lever to remove

the FPC, ensure that the lever will

not go over the initial position;

otherwise, the lever may be deformed.

* Do not apply a load to the lever

unevenly, such as to an edge only,

when opening the lever of

large number of pins; otherwise,

the lever may be deformed

Precautions after FPC insertion

1.3 Removing FPC

Precautions

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Câbles et connecteurs

Panasonic

Panasonic WV-QCA500A Manuel utilisateur

Panasonic

Panasonic FZ-VSRG211 Series Manuel utilisateur

Panasonic

Panasonic B01 Manuel utilisateur

Panasonic

Panasonic CF-VCF36U Manuel utilisateur

Panasonic

Panasonic SH-ALL1CGN Manuel utilisateur

Panasonic

Panasonic DIN Connectors Manuel utilisateur

Panasonic

Panasonic CA-VDC300N Manuel utilisateur

Panasonic

Panasonic AXG7100J7 Manuel utilisateur

Panasonic

Panasonic CF-VCF351W Manuel utilisateur

Panasonic

Panasonic P5K Manuel utilisateur

Panasonic

Panasonic CF-ACC Series Manuel utilisateur

Panasonic

Panasonic CF-VCF Series Manuel utilisateur

Panasonic

Panasonic V Series Manuel utilisateur

Panasonic

Panasonic P5KF Manuel utilisateur

Panasonic

Panasonic F4S Manuel utilisateur

Panasonic

Panasonic CN-66A Manuel utilisateur

Panasonic

Panasonic CA-VDC300U Manuel utilisateur

Panasonic

Panasonic A35UH Manuel utilisateur

Panasonic

Panasonic CF-VCF271W Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic SH-ALL1C Manuel utilisateur

Panasonic

Panasonic CA-CC30U Manuel utilisateur

Panasonic

Panasonic B01 Manuel utilisateur

Panasonic

Panasonic CA-LSR01U Manuel utilisateur

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur