oticon Amigo T30 Manuel utilisateur
INSTRUCTIONS FOR USE T30/T31
Introduction
Congratulations on your decision to take the next step in improving classroom FM.
With the Amigo T30 and T31 FM transmitters, you will experience all the benefits that
comes with a product family that is designed to meet the needs that arises through
everyday use.
The Amigo product is extremely versatile, making life much easier for users in school
settings. The transmitters and receivers can be used with virtually all Behind-the-Ear
hearing instruments, as well as cochlear implants and bone anchored hearing solutions.
Contents
Typical package content 7
Overview of the T30/T31 8
Preparing your Amigo system 9
Charging the battery 10
Selecting language and country (first time only) 12
The Amigo Receivers 13
Changing the pin orientation 14
Using Amigo R12 15
Choosing and changing channels 16
Synchronising Amigo receivers 17
Synchronising other manufacturers’ receivers 19
About channels 20
Using the TT-function (T31 only) 21
Connecting external audio sources (TV, MP3 etc.) 23
T30 and T31 special functions 24
LED / Display legend 27
Microphone options 28
Cleaning of the T30/T31 29
Appendix A: Troubleshooting 30
Appendix B: Manufacturer’s warranty 32
Warnings 37
7
Typical package content
T30/T31 Charger
Monitoring earphones
Instructions For Use
Aux cables
Rechargeable NiMH
AA battery
Omni microphone
IMPORTANT NOTICE
Please familiarise yourself with the entire contents of this booklet before using your
Amigo T30/T31. The booklet contains various statements, safety instructions and
important information about the use and handling of the Amigo T30/T31
9
LED status indicator
ON/OFF/Mute
2.5 mm microphone jack
High resolution LCD display
Team Teaching (T31 only)
Clear entered values
Synchronize receiver/enter
3.5 auxiliary audio input jack
“MiniB” USB charge jack
Overview of the T30/T31
SYNC acts as the “ENTER” button. “C” acts as the “CLEAR/EXIT” button.
Preparing your Amigo system
Inserting battery
Remove the battery lid on the back of the transmitter and
insert the rechargeable battery – remember to position
the battery according to the markings (+/ -) on the label.
Then replace the battery lid. The T30/T31 can then be
used to charge the battery that came in the package.
Note: The positive and negative ends of the battery may
appear similar, so do double-check that the battery is
positioned correctly.
10 11
Charging the battery
To charge the battery, plug in the charger as shown
in the picture.
The Amigo T30/T31 uses one AA rechargeable NiMH
battery, which must be charged for 14 hours before
being used for the first time.
The T30/T31 offers failsafe charging, which prevents
alkaline batteries being charged.
The display on the T30/T31 will indicate when the
unit is charging. Also, the LED will turn on and shine
green.
Note: With a typical user pattern it is recommended
to replace rechargeable batteries once every year,
because the battery capacity decreases each time
it is charged.
Battery charging
T30
Charging Error
Check
Battery!
If you do not have time to charge the battery that came with the T30/T31, you can
replace the battery with any of the following:
• Special “silver-banded” rechargeable batteries
(Only available through your hearing care professional, these are the only batteries
that can be recharged inside the transmitter.)
• Standard, rechargeable NiMH batteries
These cannot be recharged inside the transmitter, but must be charged in a separate
charger.
• Standard, non-rechargeable alkaline batteries
Can be used when rechargeable batteries are not available, i.e. if you don’t have time
to charge your rechargeable batteries. Alkaline batteries cannot be recharged and
cannot be purchased from Oticon.
Note: Always dispose of old batteries in approved battery disposal bins. For more
information please consult your Hearing Care Professional.
12 13
Selecting language and country (first time only)
Turn the transmitter on by pressing and holding the On/Off button for two seconds.
Press ▲ or ▼ to select language, and confirm by pressing the SYNC button.
To select your country, use the ▲ or ▼ buttons, and confirm by pressing the SYNC button.
Select Language
English
Francais
Deutsch
•
•
•
Select Country
United States
Canada
Germany
•
•
•
Note: Selecting a country will also select a predefined channel list, which contains all
of the channels approved for use in that country.
Warning: Only use channels legal in your country
The Amigo Receivers
LED status indicator
3-position mode switch
Channel seek/toggle (R2 and R7 only)
Note: Since Amigo receivers draw their power from the hearing instrument battery,
there is no reason to try to open the receiver casing. Never attempt to do this.
Europin connector
Europin rotation lock
14 15
Changing the pin orientation
If the pins on the Amigo receiver do not match the holes on the audio shoe, they can
be rotated in steps of 90°.
Simply pull the tab on both sides of the receiver back simultaneously, move the pins
and push the tab back in.
Amigo receivers can be positioned with the LED facing to the front or the back.
Note: To ensure optimal antenna performance, the Amigo R1/R2 must be positioned
with the LED facing either to the front or to the back.
Using Amigo R12
• The hearing instrument detects the Amigo R12 and automatically adds two programs
and will default go to the FM+M program.
• If the switch on the hearing instrument is enabled, it is
possible to change program on the hearing instrument.
LED status indicator
Channel seek/Off
Hearing instrument
connector
Oticon Safari with
the dedicated,
Amigo R12 receiver.
Note: Visit www.Amigofm.com for a comprehensive list of the hearing instruments that
can be used with Amigo R12.
16 17
Choosing and changing channels
To change the transmitting channel on the Amigo transmitter, press and hold either
the ▲ button or the ▼ button for two seconds to select one of the predefined lists of
channels.
When the channel number begins to blink, press ▲
or ▼ to change channel. Press the SYNC button to
confirm the choice of channel. The transmitter will
then be locked on to the new channel.
When the channel number is blinking you can return
to the original channel by pressing the C-button.
This will also take you back to the main menu.
Whenever you need to change channel, simply repeat
the procedure.
Synchronising Amigo receivers
Connect the receiver to a hearing instrument, and turn it on. Check that the receiver
switch is set to one of the two ON modes.
Within a distance of approximately 50 cm, press the SYNC button on the transmitter
briefly. The LED on the transmitter will then blink three times, and the SYNC logo will
appear on the screen. If the synchronisation is successful, the receiver will also blink
three times.
Note: The switch on the receivers can be disabled, so use the T30/T31 or the WRP to
check the status. In its default setting, the receiver switch is enabled.
Off FM-only FM+HA
18 19
When the receiver’s LED is on, it confirms that:
• The hearing instrument battery is ok
• The receiver is on
• The transmitter and receiver are working together perfectly
• The child is on the right channel
Synchronising other manufacturers’ receivers
The T30/T31 are compatible with most other manufacturers’ receivers. However, Amigo
receivers can only be synchronised wirelessly by Amigo transmitters.
To ascertain whether an FM signal is present you must ensure that both the transmitter
and the receiver are on the same channel.
Find out which channel the receiver is operating on, and change the channel on the
T30/T31 by pressing either the ▲ or the ▼ button. The system should then be working.
Note: To obtain information about connecting your Amigo receivers to Cochlear Implants
and bone anchored hearing solutions, please consult your Hearing Care Professional.
Autres manuels pour Amigo T30
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels oticon Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
