oticon FittingLINK 3.0 Manuel utilisateur
Instructions for use
Wireless
Programmer
FittingLINK 3.0
Introduction to this booklet
This booklet guides you on how to use and maintain your new
FittingLINK 3.0. Please read the booklet carefully including the
“Warnings” section. This will help you get the most out of your new
FittingLINK 3.0.
If you have additional questions about the use of your FittingLINK
3.0, please contact your supplier’s support function.
For your convenience this booklet contains a navigation bar to help
you navigate easily through the different sections.
About Startup Daily use Warnings More info
Intended use
FittingLINK 3.0 is intended as a programming interface to fitting
software, for wireless transfer of fitting data from the device
running the fitting software to the wireless hearing aids.
FittingLINK 3.0 is intended to be used by hearing care professionals.
Compatibility
FittingLINK 3.0 is compatible with Oticon hearing aids with 2.4 GHz
radio technology. It is backwards compatible and can be used with
FittingLINK WP-2. For backwards compatibility refer to FittingLINK
WP-2 “Instructions for Use” which can be
found on: www.oticon.com
INSTRUCTIONS FOR USE
Table of contents
About
Package contents 6
Product overview 7
Start up
Connect FittingLINK 3.0 to a PC 8
FittingLINK 3.0 and your fitting software 11
Daily use
How to use FittingLINK 3.0 12
Pairing FittingLINK 3.0 with 2.4 GHz wireless hearing aids 14
LED indicator 18
Taking care of your FittingLINK 3.0 19
Troubleshooting 20
Warnings
Warnings 24
More info
International warranty 26
Technical information 27
Instructions for use
Wireless
Programmer
FittingLINK 3.0
6 7
About Startup Daily use Warnings More info
About
Package contents
You will find the following items in the package:
Product overview
FittingLINK 3.0 Desk stand Instructions for Use
(this booklet)
FittingLINK 3.0
Desk stand
LED indicator
Cable (2 m)
USB 2.0
8 9
About Startup Daily use Warnings More info
Connect FittingLINK 3.0 to a PC
Before FittingLINK 3.0 can be used as your programming device
for wireless hearing aids, Genie 2 must be installed on your PC.
FittingLINK 3.0 must then be plugged into your PC in one of
two ways:
You can choose to plug FittingLINK 3.0 in the desk stand and
connect the USB cable from the desk stand to the PC [A]
Start up
A
B
We recommend that you keep FittingLINK 3.0 in the desk stand to
ensure optimal performance.
or you can choose to plug FittingLINK 3.0 directly into a USB port on
the PC [B].
10 11
When you have connected FittingLINK 3.0 and turn on your PC the
first time, a small pop-up window will appear on the screen indicat-
ing that the applicable driver is being installed. Let the installation
finish before you proceed.
The driver installation runs only the first time you turn on your PC
or in case you unplug FittingLINK 3.0 and afterwards plug it into a
different USB port than the one originally used.
About Startup Daily use Warnings More info
FittingLINK 3.0 and your tting software
When you have connected FittingLINK 3.0 to your PC and you open
Genie 2 for the first time, FittingLINK 3.0 will be detected as a
programming device.
FittingLINK 3.0 is automatically added as an option on the “Detect”
button in Genie 2.
12 13
About Startup Daily use Warnings More info
How to use FittingLINK 3.0
At the beginning of every programming session FittingLINK 3.0
needs to be paired to the client’s hearing aids. See the “Pairing
FittingLINK 3.0 with 2.4 GHz wireless hearing aids” section.
We recommend that you keep FittingLINK 3.0 in the desk stand to
ensure optimal performance.
Operating range while pairing
In order to ensure steady high performance it is necessary to keep
the hearing aids within 30 centimeters of FittingLINK 3.0 during
pairing.
Operating range while programming
Once paired, the distance between FittingLINK 3.0 and your
hearing aids can be up to 5 meters (in direct line of sight).
Operating range for test box verification
When performing coupler-based verification in a hearing aid test
box, the distance between FittingLINK 3.0 and the hearing aids
should be as short as possible and no more than 0.5 meters.
Daily use
14 15
About Startup Daily use Warnings More info
Pairing FittingLINK 3.0 with 2.4 GHz wireless
hearing aids
1. Turn on your PC
2. Open Genie 2
3. Insert new batter-
ies in the battery
drawer on the
hearing aids.
5. Close the battery drawer and
wait for the startup jingle.
Now the hearing aids will be in
pairing mode for 3 minutes.
6. Select FittingLINK 3.0 as
your programming device
and FittingLINK 3.0 will
automatically detect all
2.4 GHz hearing aids in range.
4. Place the hearing aids and FittingLINK 3.0
within range. See the “Operating range while
pairing” section.
Up to 30 cm
16 17
About Start up Daily use Warnings More info
IMPORTANT NOTICE
Please refer to the hearing aid’s instructions for use for details on the
functionality of the specific hearing aid solution.
7. In the “Detect Wireless” section,
select the relevant hearing aids
from the list of instruments
and click “Connect” to begin the
fitting.
8. When the fitting is finished
enter “Save and Exit” and click
“OK” to save and close the
session.
18 19
LED indicator
How to read the LED indicator
Indication Description
FittingLINK 3.0 active
FittingLINK 3.0 inactive
FittingLINK 3.0 searching for in range FittingLINK WP-2
FittingLINK 3.0 in pairing mode with FittingLINK WP-2
Self test error
Steady LED off Slow flash Fast flash
Taking care of your FittingLINK 3.0
FittingLINK 3.0 and its accessories must be kept free of dirt and
debris. Use a soft, dry cloth to clean FittingLINK 3.0.
We recommend that FittingLINK 3.0 is kept in the desk stand in
between fitting sessions.
IMPORTANT NOTICE
FittingLINK 3.0 must never be washed or immersed in water or other
liquids.
About Startup Daily use Warnings More info
Autres manuels pour FittingLINK 3.0
7
Table des matières
Autres manuels oticon Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
