OPTO-EDU A59.4231 Manuel utilisateur

To ensure the safety and obtain satisfactory performance, please study this

instruction manual thoroughly before start to use your instrument.

A59.4231

HDMI+USB+TF Digital Camera, 48M, USB

Measure

Instruction Manual

I. Safety Guidelines

1. During the installation of the equipment, be sure to read this safety guide carefully, operate

in strict accordance with the installation and use instructions, and keep this manual properly

for reference.

2. The power supply voltage of the camera's power adapter is AC100V—240V@50-60Hz,

please confirm whether the power supply is within this range before use.

3. The standard power supply of the camera is a DC voltage of 5V-12V 1A, and it is

recommended to use it with the power adapter that comes with the camera.

4. The camera is placed in an indoor environment between 0°C and 50°C, and the humidity is

less than 90%. Prevent foreign objects from entering the camera, and do not splash liquid on

the camera to prevent danger.

5. Avoid severe vibration and immersion during transportation, storage and installation to

avoid damage to the product.

6. Please do not disassemble the camera without authorization. There are no parts in the

camera that users can repair by themselves.

7. When cleaning the camera casing, please wipe it with a dry soft cloth. If the dirt is serious,

please wipe it gently with a neutral detergent.

8. If there are gray shadows in the image, please use a blower to blow off the dust on the filter,

and do not use detergent to wipe it.

9. Power polarity:

II. Key Description

1. Electronic zoom in and zoom out

(1) Press the UP button to enlarge the image electronically, and display the electronic

magnification factor on the left side of the image, up to 5 times electronic magnification.

(2) After electronically zooming in, press the DOWN key and the image will shrink

electronically, and the current electronic magnification will be displayed on the left side of the

image until it returns to the original size of the image.

2. Switch photo/video mode

(1) The system defaults to the camera mode, and then press the OK button to take a photo.

(2) Press the MODEL key to switch to video recording mode, press the OK key to start video

recording, and press the OK key again to stop video recording.

III. Instructions

1. Ready to use:

(1). Unscrew the lens cap and install the lens;

△! Note: tear off the dust protection film on the front of the photosensitive sheet! ! !

(2). Plug in the HDMI cable and the DC power supply respectively. At this time, the LED light

turns orange, indicating that the camera has been turned on;

(3). If you connect to a computer, you only need to plug in the USB cable to connect to the

computer;

2. Language selection (take English as an example)

(1). Press the menu key MENU to enter the main menu, then press the key DOWN, the

Language option is highlighted, then press the OK key to enter the language setting, use the

down key DOWN to select Simplified Chinese, press the OK key to return to the main menu.

IV. Operation Instruction

V. Maintenance

3.Line set

(1). In the main menu, select Line Setting, press the OK key to enter the Line Set menu.

(2). You can use the down key DOWN and the up key UP to select the option to be set.

(3). When Cross Hair is highlighted, press OK to turn on and off the center cross hair.

(4). When the Line is highlighted, press the OK key or the MODE key to select the line

number 1-8.

(5). When the Direction is highlighted, press the OK key or the MODEL key to choose

whether the direction of the line is horizontal, vertical or closed.

(6). When the Position is highlighted, press the OK key or the MODEL key to move the lines,

and long press to move the lines quickly.

(7). When Color is highlighted, press the OK key or the MODELkey to change the color of the

line. There are five color options: red, white, green, black, and blue.

(8). When Thickness is highlighted, press OK or MODEL to change the thickness of the line.

There are 4 thicknesses to choose from.

4. Exposure set

(1) Quickly turn off the automatic exposure, you can long press the "MODEL/AE" button to

turn the automatic exposure on and off.

(2) Press MENU to open the main menu, press the DOWN key to move to the Exposure

option, and then press the OK key to enter the exposure setting. You can adjust the exposure

on/off and exposure value adjustment through the menu.

Enter the exposure menu, use the UP key and the DOWN key to select the automatic option

highlight, use the OK key and MODEL to select the automatic exposure on or the automatic

exposure off. Use the UP key and the DOWN key to select the exposure value, and use

the OK key and the MODEL key to adjust the corresponding value. Note that the exposure

value is only allowed to be adjusted when the automatic exposure is turned off.

5.AWB set

(1)Press MENU to open the main menu, press the DOWN key to move to the AWB option,

then press the OK key to enter the white balance menu, use the OK key and MODEL to select

automatic balance on or automatic white balance off.

(2) Enter the white balance setting menu, after turning off the automatic white balance, you

can adjust the red, green and blue values. Use the UP and DOWN keys to select the item to

be adjusted, use the OK key to increase the value, and the MODEL key to decrease the

value.

6.Color set

Press MENU to open the main menu, press the DOWN key to move to the Color option, then

press the OK key to enter the color menu, use the UP key and the DOWN key to select the

color mode or black and white mode, press the OK key to confirm and exit, press MENU

Menu key to give up the operation and return to the main menu.

7. Frequency set

Press MENU to open the main menu, press the DOWN key to move to the Frequency option,

then press the OK key to enter the optical frequency menu, use the UP key and the DOWN

key to select 50Hz or 60Hz, press the OK key to confirm and exit, press MENU Menu key to

give up the operation and return to the main menu.

8. Format

Press MENU to open the main menu, press the DOWN key to move to the Format option,

then press the OK key to enter the format menu, use the UP key and the DOWN key to select

cancel or confirm. Select Cancel and press OK to give up the operation and return to the

main menu, select Confirm and press OK to confirm that the camera will format the TF card.

Note: After the formatting operation, the original file content in the TF card will be cleared,

please make sure that the content in the TF card has been backed up when performing this

operation!

9. Record size set (size when recording video)

Press MENU to open the main menu, press the DOWN key to move to the Record Size

option, then press the OK key to enter the video size menu, use the UP key and the DOWN

key to select the desired size, press the OK key to save and exit to return to the main menu.

10. Resolution set

Press MENU to open the main menu, press the DOWN key to move to the Resolution option,

then press the OK key to enter the Resolution menu, use the UP key and the DOWN key to

select the desired pixel, press the OK key to save and exit to return to the main menu.

11. Mirror Image

Press MENU to open the main menu, press the DOWN key to move to the Mirror Image

option, then press the OK key to enter the mirror menu, use the UP key and the DOWN key to

select the horizontal or vertical mirror setting, press the OK key to select on or off, Press

MENU to save and exit.

12. Date Stamp set

Press MENU to open the main menu, press the DOWN key to move to the Date Stamp option,

and then press the OK key to enter the date stamp menu, use the UP key and DOWN key to

select off, date or date time, press the OK key to save and exit. The photos taken after

selecting Close will not display the time when the photo was taken, the photos taken by

selecting the date will display the photo date watermark, and the photos taken by selecting

the date and time will display the photo date and time watermark.

13. Date & Time set

Press MENU to open the main menu, press the DOWN key to move to the Date & Time

option, and then press the OK key to enter the date and time menu. Press the OK key to

switch and select the cycle to select the item to be adjusted (such as year, month, day). When

the item to be adjusted is red, press the UP key and the DOWN key to adjust the value of the

selected item in red. After adjustment Press MENU to save changes and exit to return to the

main menu.

14.System set

(1). Press MENU to open the main menu, press the DOWN key to move to the system option,

then press the OK key to enter the system menu, use the UP key and the DOWN key to

select: restore factory defaults, system information and SD card information.

(2). When choosing to restore the factory settings, press the OK button again.At this time, the

user will be reminded whether to restore the factory settings. Use the UP button and the

DOWN button to select yes or no, and press the OK button to confirm.

(3). When selecting system information, press the confirm key again, and the current software

version information will be displayed. Press OK to return, press MENU to return to the main

menu.

(4). When selecting SD card information, press the OK button again, the current SD card

information will be displayed, press OK to return, press MENU to return to the main menu.

15. Monitor set

Press MENU to open the main menu, press the DOWN key to move to the Monitor option,

then press the OK key to enter the Monitor menu, use the UP key and the DOWN key to

select the desired display scale, press the OK key to save and exit to return to the main

menu.

16. Bright/Contrast/Hue/Edge set

Press the MENU key to enter the main menu, then press the DOWN key, the

Bright/Contrast/Hue/Edge option is highlighted, then press the OK key to enter the

Bright/Contrast/Hue/Edge setting, use the DOWN key to select the value, and press the Enter

key OK, return to the main menu.

VI. Remote control and button operation instructions

VII. Packing List of Instrument

Including HDMI Cable

USB Cable

Remote Controller

DC Adapter

Manual

32G TF Card

Packing Box 16.5*10.5*8.7cm/0.5Kg

Electronic Amplification

Left Button

Horizontal Mirror

Vertical Mirror

Black And White

Photograph

Up Key

Down Key

Center Reticle

Freeze

Video

Electronic Zoom Out

Right Click

Automatic Exposure

Auto White Balance

Play

Play Back

Autres manuels OPTO-EDU Microscope

OPTO-EDU

OPTO-EDU A23.1502 Series Manuel utilisateur

OPTO-EDU

OPTO-EDU A34.5017 Manuel utilisateur

OPTO-EDU

OPTO-EDU A14.1065 Manuel utilisateur

OPTO-EDU

OPTO-EDU A63.7080 Manuel utilisateur

OPTO-EDU

OPTO-EDU A15.1018 Manuel utilisateur

OPTO-EDU

OPTO-EDU A15.2603 Manuel utilisateur

OPTO-EDU

OPTO-EDU A13.2604-B Manuel utilisateur

OPTO-EDU

OPTO-EDU A63 .7080 Manuel utilisateur

OPTO-EDU

OPTO-EDU EX31 Series Manuel utilisateur

OPTO-EDU

OPTO-EDU A15.2601-T Manuel utilisateur

OPTO-EDU

OPTO-EDU A15.1091 Manuel utilisateur

OPTO-EDU

OPTO-EDU A12.1095 Manuel utilisateur

OPTO-EDU

OPTO-EDU A12.1061 Manuel utilisateur

OPTO-EDU

OPTO-EDU A18.1828 Manuel utilisateur

OPTO-EDU

OPTO-EDU A11.6603 Manuel utilisateur

OPTO-EDU

OPTO-EDU A13.0905 Manuel utilisateur

OPTO-EDU

OPTO-EDU A15.2604 Manuel utilisateur

OPTO-EDU

OPTO-EDU A11.2601 Manuel utilisateur

OPTO-EDU

OPTO-EDU A18.1825-LCD Manuel utilisateur

OPTO-EDU

OPTO-EDU A18.1831 Manuel utilisateur

OPTO-EDU

OPTO-EDU A13.2603 Manuel utilisateur

OPTO-EDU

OPTO-EDU A12.1303 Manuel utilisateur

OPTO-EDU

OPTO-EDU XD Series Manuel utilisateur

OPTO-EDU

OPTO-EDU A22 3660N Series Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur