One Forall URC-7930 Manuel utilisateur

Universal remote

Universal Fernbedienung

Télécommande universelle

Mando a Distancia Universal

Telecomando Universal

Telecomando Universale

Universele Afstandsbediening

Univerzális távvezérlő

Uniwersalny pilot zdalnego sterowania

Univerzální dálkové ovládání

Instruction manual ..............................P. 2

Bedienungsanleitung ..........................S.14

Mode d’emploi ..................................P.26

Guía del usario ..................................P.38

Manual de instruções .........................P.50

Istruzioni per l’uso .............................P.62

Gebruiksaanwijzing ............................P.74

Használati útmutató

.........................P.86

Instrukcja obsługi

...............................P.98

Návod k použití

................................P.110

English

Deutsch

Français

Español

Português

Italiano

Nederlands

Magyar

Polski

Česky

URC-7930

2WWW.ONEFORALL.COM2WWW.ONEFORALL.COM

T E KEYPAD

SET UP

SETTING UP T E ONE FOR ALL 3

Direct code set up 5

Search Method 6

SET-UP CODES

TV : Television / LCD / Plasma / Projector / Rear Projector

......

123

VCR : Video Cassette Recorder / TV/VCR Combi / DVD/VCR

Combi / PVR

.....................................

133

DVD : DVD Player / DVD-R / DVD Home Cinema / DVD Combi /

DVD/HDD

.......................................

136

CODE BLINK OUT

(To find out which code is currently programmed)

QUICK CODE REFERENCE

EXTRA FEATURES

• Mode re-assignment (Changing a device mode) 10

• Volume Punch-Through 11

• Macros (Sequence of commands) 12

• Key Magic (How to program missing functions) 14

TROUBLE-S OOTING

CUSTOMER SERVICE

Table of Contents

English

Installing the Batteries

Your ONE FOR ALL 3 needs 2 new “AA/LR6” alkaline batteries.

1Remove the battery cover from the back of your ONE FOR ALL 3.

2Match the batteries to the + and - marks inside the battery case,

then insert the batteries.

3Press the battery cover back into place.

WWW.ONEFORALL.COM 3

The Keypad

1Television / LCD / Plasma / Projector / Rear Projector

DVD Player / DVD-R / DVD Home Cinema / DVD Combi /

DVD/HDD

Video Cassette Recorder / TV/VCR Combi / DVD/VCR Combi

2 Power (LED)

The PO ER key operates the same function it did on

the original remote control. The red LED (Light

Emitting Diode) underneath the PO ER key will light

up every time a key is pressed.

3Number Keys

The Number keys (0-9, / -/--) provide functions just like

your original remote. If your original remote has an

20 key, this function can be found under the AV key.

4 AV Key

In TV mode you will obtain the AV / Input function. In

VCR mode you will obtain the “TV/VCR” function, if

available on your original remote. In DVD mode you

will obtain the “TV/DVD” function, if available on

your original remote.

5 red, green, yellow, blue

After pressing the TV key and accessing the text

mode, the keys marked red, green, yellow and blue,

allow you to access the Fastext functions of your

television. If on your original remote control these

keys are used for Menu navigation, the ONE FOR ALL

Fastext keys may operate in the same way.

6 Guide

In TV and/or DVD mode you will obtain the “Guide”

function (if available on your original remote).

7 M (MAGIC) Key

The M (MAGIC) key is used to set up your ONE FOR

ALL 3.

8 Menu Key

The MENU key controls the same function as it did on

your original remote.

4WWW.ONEFORALL.COM

9 Directional Keys

If available on your original remote, these keys will

allow you to navigate through the menu mode of

your device.

10 OK

The OK key will confirm your choice in menu

operation.

11 Volume +/- Keys

These keys operate in the same way as the keys on

your original remote. In TV mode you may obtain

Colour + / - when you press and release the M

(MAGIC) key and then press Volume + / - .

12 Channel +/- Keys

These keys operate in the same way as the keys on

your original remote. In TV mode you may obtain

Brightness + / - when you press and release the M

(MAGIC) key and then press Channel + / -

13 Transport Keys (VCR / DVD)

These keys operate the transport functions (PLAY, FF,

RE etc.) of your device. To prevent accidental

recording, the RECORD key mustbe pressed twice to

start recording.

14 Teletext Keys

After pressing the TV key, the transport keys (RE , PLAY, PAUSE, FF)

are used to operate the main Teletext functions. The symbols below

the keys are for Teletext. The text keys are used to access the Teletext

functions of your television. Of course, your television must have

Teletext capability.

TEXT ON: Puts the television in the Teletext mode.

EXPAND: Shows the top half of the Teletext page in larger letters.

By pressing again, you can see the bottom half of the Teletext

page enlarged. To return to regular Teletext viewing, press the

EXPAND key again, or press the TEXT ON key, depending on your

television.

TEXT OFF: Switches the television back to regular viewing mode.

On some televisions, this may be done by pressing the TEXT ON

key several times.

OLD/STOP: Stops changing pages.

MIX: Shows teletext and regular television simultaneously. You

may also use this key for subtitling. On some televisions this

function is accessed by pressing the text key twice.

16:9: This key provides you the (16:9) wide screen view function,

if available on your original remote).

Important note:

For a ore detailed explanation of Teletext and Fastext, please

refer to the anual of your television. Re e ber, different televisions

control Teletext and Fastext features in different ways. Not all of the

Teletext functions ay be available for your particular odel.

Direct code set up

Example: To set up the ONE FOR ALL 3 for your television:

1Find the code for your device in the Code list (page 123 -

139). Codes are listed by device type and brand name.

The most popular code is listed first. Make sure your

device is switched on (not on standby).

2Press the TV key on the ONE FOR ALL 3 for the device

you wish to Set-Up.

3Press and hold down the M (MAGIC) key

until the red LED underneath the PO ER key

blinks twice (the red LED will blink once

then twice).

4Enter your (four-digit device code) using the number

keys. The red LED will blink twice.

5Now, aim the ONE FOR ALL 3 at your device and

press POWER If your device switches off, the ONE

FOR ALL 3 is ready to operate your device.

6Turn your device back on and try all the remote’s functions to ensure

they are working properly. If the functions do not work properly,

repeat steps 1-5 using another code listed under your brand.

7 If your device does not respond, follow steps 1 to 5 with

each code listed for your brand. If none of the codes listed

for your brand operate your device, or if your brand is not

listed at all, try the search method described on page 6.

Setting up the ONE FOR ALL 3

Before you start, please read these instructions carefully

Important notes:

- Most TV’s do not switch on pressing the PO ER key. Please try pressing a

“number” key or the “TV-text off” key to switch your TV back on.

- Some codes are quite similar. If your device does not respond or is not func-

tioning properly with one of the codes, try another code listed under your

brand.

- If your device’s original remote control does not have a PO ER key, press

PLAY instead of PO ER when setting up your device.

- Remember to press the correct device key before operating your device.

Only one device can be assigned to a device key. If your original remote

operates more than one device, you need to set up each device separately.

ONEFOR A

Acura

Admiral

Adyson

Agazi

AGB

Agef

Aiko

0009

0087,0093,0363,041

0217,0216

0264

0516

0087

0216,0009,0037,0

0037,0274

0361,0208,0371

_ _ _ _

WWW.ONEFORALL.COM 5

6WWW.ONEFORALL.COM

The Search Method

If your device does not respond to the ONE FOR ALL 3 after you have tried

all the codes listed for your brand, try searching for your code. The Search

Method allows you to find the code for your device by scanning through all

the codes contained in the memory of the ONE FOR ALL 3. The Search

Method may also work if your brand is not listed at all.

Example: To search for your TV code:

1Switch your television on (not on standby) and aim your ONE FOR ALL

at your TV.

2Press the TV key on your ONE FOR ALL 3.

3Press and hold down the M (MAGIC) key

until the red LED underneath the PO ER key

blinks twice (the red LED will blink once

then twice).

4Press 991. The red LED will blink twice.

5Next, press POWER.

6Aim the ONE FOR ALL 3 at your Television. Now press C +

over and over, until your Television turns off (everytime

you press the CH+ key the ONE FOR ALL 3 will send out a

PO ER signal from the next code contained in the

memory). You may have to press this key many times (up

to 150 times) so please be patient. If you skip past a code,

you can go to the previous code(s) by pressing the CH-

key. Remember to keep pointing the ONE FOR ALL 3 at

your Television while pressing this key.

7As soon as your television turns off, press the M (MAGIC)

key to store the code.

Important notes:

- Most TV’s do not switch on pressing the PO ER key. Please try pressing a

“number” key or the “TV-text off” key to switch your TV back on.

- To search for the code for another device follow the instructions above

only press the appropriate device key instead of TV during step 2.

- If your Video’s original remote control does not have a PO ER key, press

PLAY instead of PO ER during step 5.

6WWW.ONEFORALL.COM

Once you have Set-Up your ONE FOR ALL 3, you can blink back your

SET-UP CODE for future reference.

Example: To blink out your Television code:

1Press TV once.

2Press and hold down the M (MAGIC) key

until the red LED underneath the PO ER key

blinks twice (the red LED will blink once

then twice).

3Press 990. The red LED underneath the PO ER key will

blink twice.

4For the first digit of your four-digit code, press 1and

count all the red blinks. If there are no blinks, the digit is

"0".

5For the second digit, press 2and count all the red blinks.

If there are no blinks, the digit is "0".

6For the third digit, press 3and count all the red blinks.

If there are no blinks, the digit is "0".

7For the fourth digit, press 4and count all the red blinks.

If there are no blinks, the digit is "0". Now you have

your four-digit code.

Code Blink out

(To find out which code is currently programmed)

Quick Code Reference

Device Type Code

1._________________________

2._________________________

3._________________________

4._________________________

5._________________________

■

■■

■ ■

■

■■

■ ■

■

■■

■ ■

■

■■

■ ■

■

■■

■ ■

■

WWW.ONEFORALL.COM 7

It is possible to change the mode of any device key. This is useful if you

want to set up two of the same devices on the ONE FOR ALL 3. The code

can be set up using “Direct code set up” (pag. 5) or “Search method” (pag.

6). To change a device key, see the three examples below.

Example 1) if you want to program a second TV on the VCR key.

Example 2) if you want to program a second TV on the DVD key.

Example 1:

To program a second Television on the VCR key (for example), you need

to change the VCR key into a TV key, so press:

(*) (**)

The VCR key has now become a second TV key.

Now enter the Set-Up code for your second TV by pressing:

(*) (TV code) (**)

Example 2:

To program a second Television on the DVD key (for example), you need

to change the DVD key into a TV key, so press:

(*) (**)

The DVD key has now become a second TV key.

Now enter the Set-Up code for your second TV by pressing:

(*) (TV code) (**)

Resetting a Device key

Example: To reset the VCR key to its original mode, press:

(*) (**)

Example: To reset the DVD key to its original mode, press:

(*) (**)

(*) Press and hold down the M (MAGIC) key until the red LED

underneath the POWER key blinks twice.

(**) The the red LED underneath the POWER key will blink once

then twice.

Extra Features

Mode re-assignment

(Changing a device mode)

_ _ _ _

8WWW.ONEFORALL.COM

Volume Punch Through

You may be able to use some functions of your Television, Video recorder

or DVD player at the same time. For example: if you are watching a pro-

gram on your video recorder, you can adjust the volume (a TV function)

without pressing the TV mode key on your ONE FOR ALL 3. The table

below lists some of the possibilities.

To punch through to TV volume while in the VCR or

DVD mode:

1. Press and hold down the M (MAGIC) key until

the red LED underneath the POWER key blinks

twice (the red LED will blink once then twice).

2. Press 9 9 3.

3. Then press the TV key and the red light will

blink twice.

To cancel the “Volume Punch Through” per mode:

(Example: to cancel the “Volume Punch Through” for the VCR mode)

1. Press VCR once.

2 Press and hold down the M (MAGIC) key until

the red LED underneath the POWER key blinks

twice (the red LED will blink once then twice).

3. Press 9 9 3.

4. Then press the Volume (-) key and the red light

will blink four times.

Result: being in VCR mode, you will be able to control VOL+/- or MUTE

functions of your VCR (provided it has volume control).

To cancel the „Volume Punch Through“:

1 Press and hold down the M (MAGIC) key until

the red LED underneath the POWER key blinks

twice (the red LED will blink once then twice).

2. Press 9 9 3.

3. Press the Volume (+) key and the red light will

blink four times.

Extra Features

WWW.ONEFORALL.COM 9

Macros (Sequence of commands)

Extra Features

Macros (Direct)

You can program your ONE FOR ALL 3 to issue a sequence of commands at

the press of one button. Any sequence of commands you regularly use can

be reduced to one key stroke for your convenience. For example, you may

want to turn off your TV, VCR and DVD Player at the same time.

Example: To set up the Macro mentioned above on the ”Red” key

on your ONE FOR ALL 3:

1Press and hold down the M (MAGIC) key until the red LED

underneath the POWER key blinks twice (the red LED will

blink once then twice).

2Press 9 9 5.

3Then press the Red key to which the Macro will be assigned.

4Next press TV, POWER, VCR, POWER, DVD, POWER.

5To store the Macro, Press and hold down the M (MAGIC) key

until the red LED underneath the PO ER key blinks twice (the red

LED will blink once then twice).

6henever you press the ”Red” key, the ONE FOR ALL 3 will turn

off your TV, VCR and DVD player.

• To erase the Macro from the Red key, press:

M* 9 9 5 Red key M*

* Here you must hold down THE M (MAGIC) KEY until the red LED

underneath the PO ER key blinks twice (the red LED will blink

once then twice).

10 WWW.ONEFORALL.COM

Autres manuels pour URC-7930

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels One Forall Télécommande universelle

One Forall

One Forall URC-7560 Manuel utilisateur

One Forall

One Forall URC-1031 Manuel utilisateur

One Forall

One Forall URC-7532 Manuel utilisateur

One Forall

One Forall URC-7530 Manuel utilisateur

One Forall

One Forall URC-2500 Manuel utilisateur

One Forall

One Forall URC-3710 Manuel utilisateur

One Forall

One Forall KAMELEON 5 URC-8305 Manuel utilisateur

One Forall

One Forall URC-3445 Guide de l'administrateur

One Forall

One Forall Mosaic URC-9990 Manuel utilisateur

One Forall

One Forall URC-7540 Manuel utilisateur

One Forall

One Forall URC-6210 Manuel utilisateur

One Forall

One Forall URC-6532 Manuel utilisateur

One Forall

One Forall URC-3425 Manuel utilisateur

One Forall

One Forall URC 1810 Manuel utilisateur

One Forall

One Forall URC-3550 Manuel utilisateur

One Forall

One Forall URC-3450 Manuel utilisateur

One Forall

One Forall BIG EASY URC-2585 Manuel utilisateur

One Forall

One Forall SPORT Manuel utilisateur

One Forall

One Forall Easy 2 Manuel utilisateur

One Forall

One Forall Easy 4 Manuel utilisateur

One Forall

One Forall URC-4220 Manuel d'installation et d'exploitation

One Forall

One Forall URC-7010 Manuel utilisateur

One Forall

One Forall 3 Zapper Manuel utilisateur

One Forall

One Forall URC-3710 Guide de l'administrateur

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

GE 24929 Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

GE RM94931 Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

GE RM24965 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

GE RM24950 Manuel utilisateur