Olympus NY-SP800 Manuel utilisateur
＊First, remove lens cap as shown below.. ＊Next
★ Installation to microscope is next page
■ φ30ｍｍ conversion ring,
Insert adapter all the way down the ring.
It should be fit tight.
■ C-mount adapter,
First, screw C-mount adapter into microscope’s C-mount.
Second, insert main unit (with φ30mm conversion ring)
into C-mount adapter and secure with screw on the side.
Main Unit
Built-in
Relay lens.
SP800 attachment
C-mount
adapter
Connect to
C-mount
Conversion
Ring
Fit with
eyepieceφ30m
m
SP800 Attachment
BODY
Microscopic documentation with the Olympus
SP-800UZ and microscope adapter“NY-SP800.” Please
refer to this manual for installation and camera settings.
JIS phototube
JIS standard of outer diameter φ25mm, and inner diameter
Φ23.2mm. Old models of Olympus microscope usually
employed this standard. It requires fixation sleeve
[NY-JIS (option)] to secure adapter to microscope
*Able to connect without NY-JIS, however the image may come out blurry.
Installing to Eyepiece
Insert adapter to eyepiece tube. (remove eyepiece first).
If tube’s inside diameter is φ30mm, first install conversion ring to main unit,
then slide it into eyepiece. If tube’s inside diameter is φ23.2mm, insert the main unit
directly to eyepiece. * Adapter would start rotate when diopter adjusting ring is attached to
eyepiece. In such case, please insert the adapter after turning diopter adjusting ring to either end.
Nikon F phototube
Insert only main unit to Nikon F phototube. Recent Nikon trinocular microscope is usually
equipped with V-T phototube for F-phototube. In old model, Optiphot, Biophot, SMZ-2T
trinocular are applicable. If microscope is equipped with 35mm camera or Polaroid
system, it is usually same as old model.
※SMZ-10 require optional sleeve. ※Adapter would start rotate when diopter adjusting ring is attached to
eyepiece. In such case, please insert the adapter after turning diopter adjusting ring to either end.
C-mount
C-mount usually is for installing CCD camera which has become trendy
nowadays. C-mount has male screw of outer diameter 25.4mm. First, install
C-mount adapter into microscope’s C-mount. Second, insert main unit (with
φ30mm conversion ring) into C-mount adapter and secure with screw on the side..
*only direct (1.0x) C-mount is compatible. C-mount with lens inside should not be used.
Olympus PT phototube
PT phototube has outer diameter of φ38mm with curving thread
at the top. U-SPT, SZ-PT phototubes are these standards.
When 35mm camera or Polaroid systems are already installed,
it is usually PT phototube. It requires fixation sleeve [NY-BH
(option)] to secure adapter to microscope
・・・Camera setting for capturing quality image.
* Please refer to camera’s user’s manual for initial setting and basic operation.
（＊Please refer to camera’s user manual for blue page numbers）
○Turn on the camera and set language, date and time・・P13
Press［ON/OFF］button to turn on the camera.
* The data and time setting screen is displayed. Set the date and time using wheel controller, and press OK.
○Setting shooting mode・・・P4, 21
Press the MENU button to display function menu. Using wheel controller (right/left) set shooting mode to［iAUTO］and press OK
○Other settings.・・・P42, P47
Using wheel controller, and select ［SET UP］. In , select ［SAVE SETTINGS］and choose YES.
In , set ［POWER SAVE］and ［PIC ORIENTATION］off.
＜Wheel Controller＞
1．Basic Setting for SP800UZ
○Installing adapter NY-S800 to the camera
Secure adapter to camera body with screw at the side of SP800 attachment.
○Setting Zoom・・・P15 ○Setting sefl-timer・・・P26
Turn Zoom Lever to T side (right -side) Select self-timer option in the shooting function menu,
until vignette would be eliminated and set to 2 SEC
※Set self timer for each shoot
○Taking picture
3. Viewing image after shooting
On the LCD monitor Connect to PC・TV monitor P11, P44
Press to view Display captured image on TV using AV cable
※Image on the LCD disappear once connected to the TV monitor
With HDMI cable (sold reparatory), able to display
high-definition image on the TV monitor.
2．Shooting
Press shutter and picture
will be taken in 2 second
Press movie button to
record movie, press aging
to stop.
USB cable to connect to PV
○Installing ocular micrometer (sold separately)
Ocular micrometer of size φ21mm can be installed into NY-SP600.
Turn the tip of adapter counter-clockwise to remove bracket for micrometer.
Put micrometer on the bracket with printed surface facing down, then reinstall to adapter body.
Printed surface facing down
Micrometer designed for digital camera adapter 【S11-CF】
(10mm/100split pitch 0.1mm)
This special micrometer for digital camera adapter omitted the
numbers entirely and moved scale to the periphery for clearer view.
Autres manuels Olympus Accessoires pour appareils photo
Olympus
Olympus GS-3 Manuel utilisateur
Olympus
Olympus FL-300R Manuel utilisateur
Olympus
Olympus MAJ-2340 Manuel utilisateur
Olympus
Olympus PT-027 Manuel utilisateur
Olympus
Olympus PT-019 Manuel utilisateur
Olympus
Olympus PT-034 Manuel utilisateur
Olympus
Olympus Waterproof Case PT-17 Manuel utilisateur
Olympus
Olympus PENPAL PP-1 Manuel utilisateur
Olympus
Olympus PT-016 Manuel utilisateur
Olympus
Olympus PT-E02 Manuel utilisateur
Olympus
Olympus CWPC-02 Manuel utilisateur
Olympus
Olympus PT-037 Manuel utilisateur
Olympus
Olympus PPO-E03 Manuel utilisateur
Olympus
Olympus TL-Lite Manuel utilisateur
Olympus
Olympus PT-E05 Manuel utilisateur
Olympus
Olympus PPO-E05 Manuel utilisateur
Olympus
Olympus EE-1 Manuel utilisateur
Olympus
Olympus DP23-AOU Manuel utilisateur
Olympus
Olympus PT-038 - Underwater Housing For FE-230 Manuel utilisateur
Olympus
Olympus OM-MOUNT PHOTOMICRO ADAPTER L Manuel utilisateur
