Oce VarioPrint 6000 Ultra Line Manuel utilisateur
-
o
Océ
Océ VarioPrint®
6000 Ultra Line
Experience ultra
speed
User manual
Maintenance tasks
Copyright
© 2009 Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted
in any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifi-
cally disclaims any implied warranties of merchantability or fitness for any particular purpose.
Further, Océ reserves the right to revise this publication and to make changes from time
to time in the content hereof without obligation to notify any person of such revision or
changes.
Edition: 2009-08
Trademarks
List of trademarks
Océ, Océ VarioPrint® 6000 Ultra Line are registered trademarks of Océ-Technologies
B.V.
Products in this publication are referred to by their general trade names. In most, if not
all cases, these designations are claimed as trademarks or registered trademarks of their
respective companies.
3
Trademarks
Contents
Chapter 1
Introduction.........................................................................................................5
Notes for the reader...................................................................................6
Available documentation...........................................................................8
Introduction to the maintenance tasks.....................................................9
Determine the required maintenance.....................................................12
Chapter 2
Maintenance tasks - Level 1.............................................................................13
Replace the cleaners................................................................................14
Lock the clean unit (left)...........................................................................28
Lock the clean unit (right)........................................................................30
Chapter 3
Maintenance tasks - Level 2.............................................................................33
Remove sheets from the process modules............................................34
Clean the OPC belt (left)...........................................................................51
Clean the OPC belt (right)........................................................................56
Clean the glue cleaning rollers................................................................61
Appendix A
Miscellaneous....................................................................................................75
Reader's comment sheet.........................................................................76
Addresses of local Océ organisations ...................................................78
4
Contents
Chapter 1
Introduction
Notes for the reader
Introduction
This manual helps you to use the Océ VarioPrint® 6000 Ultra Line. The manual contains
a description of the product and guidelines to use and operate the Océ VarioPrint® 6000
Ultra Line.
Definition
Attention-Getters
Parts of this manual require your special attention. These parts can provide the following:
■Additional general information, for example, information that is useful when you
perform a task.
■Information to prevent personal injuries or property damage.
Warning, Caution and Note
The words Warning, Caution and Note draw your attention to important information.
Overview of the attention-getters#
IndicatesIconWord
Ignoring this warning could cause serious injury or
even death.
The Warning indication has several icons that warn
against various hazards. The icons are shown below.
Warning
General hazardWarning
Hot surfaceWarning
Electric shockWarning
Moving partsWarning
Chapter 1 - Introduction6
Notes for the reader
IndicatesIconWord
Laser beamWarning
Ignoring this warning could cause injury or damage to
property.
Caution
Indicates additional important information.Note
The use of heat-resistant gloves is mandatory when you
carry out these actions.
Safety information
Before using this Océ product, make sure that you read and understand the safety infor-
mation which is part of the user documentation. You can download the safety information
via http://global.oce.com/support/ or, if applicable, find it on the user documentation
CD/DVD that is delivered together with the machine or obtain the safety information
from your local Océ representative. To avoid potential hazards, maintenance is strictly
preserved to properly qualified and trained service technicians.
Chapter 1 - Introduction 7
Notes for the reader
Available documentation
Introduction
This machine is delivered with a documentation set that consists of the following items.
■A CD-ROM with all the manuals mentioned below
■Integrated Online Helps in the printer driver, the Settings Editor and other proprietary
applications.
Note:
Please check www.oce.com for the latest version of the documentation.
Main Content of the User Manuals
The following table provides an overview of the main content of the user manuals.
Main Content of the User Manuals#
Main contentUser Manual
■Overview of the main system components
■Working with the operator panel
■Handling and managing jobs on the operator panel
■Add media, toner and staples
Operating informa-
tion
■Replacing parts
■Cleaning parts
■Solve a paper jam in the engine module
Maintenance tasks
■Instructions for safe useSafety information
Chapter 1 - Introduction8
Available documentation
Introduction to the maintenance tasks
Introduction
This manual is intended for trained and certified operators who received the special
maintenance training for the printer. Therefore, this manual is only intended as a reference
guide for the described maintenance procedures.
On the operator panel, you must always press 'Next' to continue with the next step, or
'Finish' to complete a maintenance task. After you finished a maintenance task, the oper-
ator panel will also ask you to restart the system. The procedures in this manual only
describe the physical maintenance actions.
Note:
In this manual and on the operator panel, the trained and certified operator is referred
to as the key operator.
Note:
Only a key operator is allowed to perform the maintenance tasks that are described in
this manual. To make sure that only a key operator performs the maintenance tasks, it
is recommended to define a maintenance PIN in the Settings Editor. Then the operator
panel asks for the maintenance PIN when you start the first task of a maintenance session.
A maintenance session can involve more than 1 maintenance task. A maintenance session
ends when you leave the maintenance screen that displays the maintenance tasks. When
no maintenance PIN is defined in the Settings Editor, the operator panel will not ask
for a maintenance PIN.
The maintenance levels
The machine is a high-volume production printer. Therefore, a short downtime due to
required maintenance is very important to you. To help you reduce the downtime, 2
levels of maintenance tasks are defined which key operators can be allowed to do. The
following table gives an overview of the maintenance levels and the respective maintenance
tasks.
Chapter 1 - Introduction 9
Introduction to the maintenance tasks
Overview of the maintenance tasks#
Where to find more informa-
tion
Maintenance taskMaintenance level
‘Replace the cleaners’ on page 14Replace the cleaners1
■‘Lock the clean unit (left)’ on
page 28
■‘Lock the clean unit (right)’ on
page 30
Lock the clean units
‘Remove sheets from the process
modules’ on page 34
Solve paper jams in hot ar-
eas of the printer
2
■‘Clean the OPC belt (left)’ on
page 51)
■‘Clean the OPC belt (right)’
on page 56)
Clean the OPC belts
Begin maintenance
The maintenance section of the 'System' view shows the required or suggested maintenance
tasks. Here, you can only view the maintenance tasks.
[10] Begin maintenance
Chapter 1 - Introduction10
Introduction to the maintenance tasks
Autres manuels pour VarioPrint 6000 Ultra Line
1
Table des matières
Autres manuels Oce Imprimante tout-en-un
Oce
Oce im4511 Manuel utilisateur
Oce
Oce im7520 Manuel utilisateur
Oce
Oce OP1030 Manuel utilisateur
Oce
Oce VarioLink 2222c Manuel utilisateur
Oce
Oce im5530 Manuel de la liste des pièces
Oce
Oce FX3000 SERIES Manuel utilisateur
Oce
Oce VarioLink 2221 Manuel utilisateur
Oce
Oce VarioPrint 2062 NC Manuel utilisateur
Oce
Oce VarioLink 2222c Manuel utilisateur
Oce
Oce im2330 Manuel utilisateur
Oce
Oce OP30C Manuel utilisateur
Oce
Oce im7520 Manuel utilisateur
Oce
Oce cm4010 Instructions d'utilisation
Oce
Oce OP30C Manuel utilisateur
Oce
Oce im2330 Guide de configuration
Oce
Oce im4512 Manuel utilisateur
Oce
Oce VarioLink 4522c Manuel utilisateur
Oce
Oce VarioLink 4522c Manuel utilisateur
Oce
Oce DFS10 Manuel utilisateur
Oce
Oce COLOR SYSTEM 110 Manuel de l'opérateur
Manuels Imprimante tout-en-un populaires d'autres marques
Triumph Adler
Triumph Adler DC 2016 Manuel
Epson
Epson WorkForce WF-2510 Guide de l'utilisateur
Epson
Epson Stylus Scan 2000 Manuel d'installation et d'exploitation
Epson
Epson PictureMate Snap PM 240 Mode d’emploi
Konica Minolta
Konica Minolta bizhub C35 Manuel utilisateur
Brother
Brother MFC-J430w Manuel utilisateur
