Numark PARTY MIX Manuel utilisateur

User Guide

English ( 3 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d’utilisation

Français ( 12 – 16 )

Guida per l’uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

Party Mix MKII

USB Cable

1/8” (3.5 mm) Stereo Aux Cable

Software Download Card

User Guide

Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information,

etc.) and product registration, visit numark.com.

For additional product support, visit numark.com/support.

Setup

To start using Party Mix MKII:

1. Locate the Serato DJ Lite installation card in the box to download and install the

software.

2. Connect Party Mix MKII’s USB cable to an available USB port on your computer.

3. Connect output devices (headphones, speakers, etc.) to Party Mix MKII.

4. Open the software and start DJ’ing!

Connection Diagram

Computer

Head

hones

Speakers

Features

Top Panel

LHOTo-

rem ips

12 12

15 16

17 19

14 15 16

1. Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move

forward in the software panels.

2. Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,

respectively, in the software.

3. Main Gain: Adjusts the overall volume in the software.

4. Cue Gain: Adjusts the volume for headphone cueing in the software.

5. Level: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the

software.

6. High EQ: Controls the treble frequencies for the individual channels.

7. Low EQ: Controls the bass frequencies for the individual channels.

8. Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a

low-pass filter and high-pass filter, respectively.

9. Channel Volume: Adjusts the volume of the individual channels in the software.

10. Crossfader: Controls the blend between the two decks.

11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for

monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,

you will cue that channel alone (and deactivate PFL monitoring for the other channels). To

cue to multiple channels simultaneously, press the PFL buttons for those channels at the

same time.

12. Platter/Jog Wheel: This capacitive, touch-sensitive jog wheel controls the audio when

the wheel is touched and moved. You can also grab the non-touch-sensitive outer wheel

to bend the pitch of the track.

13. Pitch Fader: This controls the speed of the music. Moving towards the “+” will speed the

music up, while moving towards the “–” will slow it down.

14. Sync: Press this button to automatically match the corresponding Deck's tempo with the

opposite Deck's tempo and phase.

15. Cue: When the Deck is paused, you can set a Temporary Cue Point by moving the

Platter to place the playhead at the desired location and then pressing the Cue button.

During playback, you can press the Cue button to return the track to this Temporary Cue

Point. (If you did not set a Temporary Cue Point, then it will return to the beginning of the

track.)

16. Play/Pause: Starts and suspends playback.

17. Performance Pads: These pads can be used to trigger Hot Cues, Loops and Samples,

and to apply effects. To change the function of the pads, press the Pad Mode button.

18. Pad Mode: Press this button to change the current function of the Performance Pads.

•Cue: Each pad assigns at Hot Cue Point, or returns the track to that Hot Cue Point.

When a pad is unlit, you can assign a Hot Cue Point by pressing it at the desired

point in your track.

•Loop: Each pad triggers and auto-loop of a different length.

•Sampler: Each pad triggers a sample in Serato DJ Lite.

•Effects: Pads 1–3 on each deck trigger an effect. Pad 4 on each deck cycles

through time divisions for beat-based effects, from 1/16 to 8beats.

19. Pad Mode Indicator: These LEDs indicate the current setting of the Performance Pads.

Left Side Panel

1. USB: This USB connection sends and receives audio and

control information from a connected computer.

2. Main Output (1/8” / 3.5 mm): Use standard 1/8” / 3.5 mm

cables to connect this output to speakers or an amplifier

system.

3. Headphone Output: Connect headphones to this 1/8” (3.5 mm) jack for monitoring the

signal. The headphone volume is controlled using the Cue Gain knob.

Right Side Panel

1. Party Ball Mode: Press this button to cycle between the different lighting

modes for the Party Balls.

i. Serato DJ Lite color-controlled (default when powered on)

Note: In this mode, you can select from three lighting control patterns in

the Serato DJ Lite Setup > Mixer menu.

ii. Serato DJ Lite beat-controlled

iii. Fixed-timing random

iv. All on

v. Off

Rear Panel

1. Party Balls: When activated, these lights will illuminate

according to the current Party Ball Mode setting.

1 1 1

Beat-Matching and Mixing with Party Mix MKII and Serato DJ Lite

Below is an example of how to mix tracks using Party Mix MKII and Serato DJ Lite:

1. Start with the Level and EQ knobs at the 12 o’clock position.

You can adjust these after the tracks are loaded.

2. Turn the Browse knob to scroll through your music library.

3. Load tracks with similar BPM onto Decks 1 and 2 by pressing

the Load 1 and Load 2 buttons on Party Mix MKII.

4. Move the crossfader on Party Mix MKII all the way to the left to

send the audio from Deck 1 to the main outputs.

5. Play the track that is loaded on Deck 1.

6. Press the PFL/Cue button on Deck 2.

7. Play the track that is loaded on Deck 2 to preview it in your

headphones. Press Sync on Deck 2 to match its BPM with Deck

8. While the track is playing, press the Cue button to return to the

beginning of the track.

9. Play the track that is loaded on Deck 2.

10. Move the crossfader on Party Mix MKII toward the right to

crossfade from Deck 1 to Deck 2.

Autres manuels pour PARTY MIX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Numark Matériel de DJ

Numark

Numark STEALTH CONTROL Manuel d'instructions

Numark

Numark NDX 400 Manuel utilisateur

Numark

Numark NS6 II Manuel utilisateur

Numark

Numark cdmix usb Manuel utilisateur

Numark

Numark CDN450 Manuel utilisateur

Numark

Numark C3 Manuel utilisateur

Numark

Numark iDJ3 Manuel utilisateur

Numark

Numark Mixtrack Quad Manuel utilisateur

Numark

Numark AXIS 9 Manuel de service

Numark

Numark DJ2GO Manuel utilisateur

Numark

Numark NS7 III Manuel utilisateur

Numark

Numark MIXTRACK PLATINUM FX Manuel utilisateur

Numark

Numark NS6 Manuel utilisateur

Numark

Numark MIXTRACK PLATINUM Manuel utilisateur

Numark

Numark iDJ Document technique

Numark

Numark DDS80 Manuel utilisateur

Numark

Numark MIXDECX QUARD Manuel utilisateur

Numark

Numark DXM01 Document technique

Numark

Numark NDX500 Manuel utilisateur

Numark

Numark 4TRAK Manuel utilisateur

Numark

Numark iDJLIVE Manuel utilisateur

Numark

Numark MIXDECK Guide d'installation

Numark

Numark iCDMIX 2 Manuel utilisateur

Numark

Numark NS6 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur