Numark MIXSTREAM PRO Manuel utilisateur
Confidential Numark Service Manual
Numark
Mixstream Pro
[NH08]
Service Manual
v1.0
2021-10-20
The information in this document contains privileged and confidential information. It is intended only for the use of
those authorized by Numark. If you are not the authorized, intended recipient, you are hereby notified that any review,
dissemination, distribution or duplication of this document is strictly prohibited. If you are not authorized, please
contact Numark and destroy all copies of this document. You may contact Numark at support@numark.com.
© Copyright Numark
ATTENTION!
This document contains sensitive proprietary information.
All recipients must have a current non-disclosure agreement on file
with Numark.
Do not make illegal copies of this document.
Confidential Numark Service Manual
Preface
This document is intended to assist the service technician in the operation, maintenance and repair of the Numark
device. Together with the User Reference Manual, this document provides a complete description of the
functionality and serviceability of the Device. Any comments or suggestions you may have pertaining to the
document are welcome and encouraged.
Read This!
In addition to any purchase price that Numark may charge as consideration for Numark selling or otherwise
transferring this service manual (“Manual”) to you, if you are not a service and repair facility (“Service Center”)
authorized by Numark in writing to be an authorized Service Center, Numark sells or transfers the Manual to you on
the following terms and conditions:
Only Service Centers authorized by Numark in writing are authorized to perform service and repairs covered by an
Numark warranty (if any), and transfer of the Manual to you does not authorize you to be an authorized Service
Center. Therefore, if you perform, or if the Manual is used to perform, any service or repairs on any Numark
product or part thereof, any and all warranties of Numark as to that product and any service contract with
Numark for that product shall be voided and shall no longer apply for such product, even if your services or
repairs were done in accordance with the Manual.
All service or repairs done by you or with reference to the Manual shall be solely your responsibility, and Numark
shall have no liability for any such repairs or service work. All such service or repairs are performed at the sole
risk of the person performing the service or repairs. You agree that all such work will be performed in a
competent, professional and safe manner at all times and to indemnify and fully hold Numark and its successors
and assigns harmless in the event of any failure to so perform.
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of resale or other
transfer.
As the owner of the copyright to the Manual, Numark does not give you the right to copy the Manual, and you agree
not to copy the Manual without the written authorization of Numark. Numark has no obligation to provide to you
any correction of, or supplement to, the Manual, or any new or superseding version thereof.
Numark shall have the right to refuse to sell or otherwise transfer repair parts or materials to you in its sole
discretion. You shall not use, sell or otherwise transfer spare or replacement parts supplied by Numark to you (i) to
repair or be used in products manufactured for or by third parties or (ii) to any third parties for any purpose.
You shall not make any warranties or guarantees with respect to the products of Numark or the use thereof on
behalf of Numark or in your own name.
The foregoing describes the entire understanding related to sale or transfer of the Manual to you, and no other
terms shall apply unless in a writing signed by an authorized representative of Numark.
All Trademarks are property of their respective companies.
Confidential Numark Service Manual
Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS PRODUCT TO WATER OR
MOISTURE.
The arrowhead symbol on a lightning flash inside a triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the enclosed product which may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point inside a triangle is intended to alert the user to the presence of
important operating, maintenance and servicing instructions in the literature which
accompanies the product.
REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED NUMARK SERVICE CENTER
WILL VOID THE NUMARK WARRANTY.
PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO COMPETE WITH ANY
NUMARK DISTRIBUTOR OR AUTHORIZED REPAIR SERVICE CENTER IN THE PROVISION OF REPAIR
SERVICES OR TO BE OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.
ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED NUMARK SERVICE CENTER
SHALL BE SOLELY THE RESPONSIBILITY OF THAT ENTITY, AND NUMARK SHALL HAVE NO LIABILITY
TO THAT ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.
Regarding the Power Supply Fuse
Caution: The product under service may employ the use of a replaceable fuse. Danger of
fire or electrocution if fuse is incorrectly replaced. Replace with only the same type or
equivalent type recommended by the equipment manufacturer.
Regarding the Internal Battery
Caution: The product under service may employ the use of a internal battery. Danger of
explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instruction.
Confidential Numark Service Manual
Safety Instructions
Carefully read the applicable items of the operating instructions and these safety suggestions before using this
product. Use extra care to follow the warnings written on the product itself and in the operating instructions. Keep
the operating instructions and safety suggestions for reference in the future.
1. Power Source. The product should only be connected to a power supply which is described either in the
operating instructions or in markings on the product.
2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to step on the
cords and such that nothing will be placed on or against them.
3. Periods of Non-use. If the product is not used for any significant period of time, the product’s AC power supply
cord should be unplugged from the AC outlet.
4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any openings of the
product.
5. Water or Moisture. The product should not be used near any water or in moisture.
6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or other heat
producing equipment.
7. Ventilation. When installing the product, make sure that the product has adequate ventilation. Improperly
ventilating the product may cause overheating, which may damage the product.
8. Mounting. The product should only be used with a rack which the manufacturer recommends. The
combination of the product and rack should be moved carefully. Quick movements, excessive force or uneven
surfaces may overturn the combination which may damage the product and rack combination.
9. Cleaning. The product should only be cleaned as the manufacturer recommends.
10. Service. The user should only attempt the limited service or upkeep specifically described in the operating
instructions for the user. For any other service required, the product should be taken to an authorized service
center as described in the operating instructions.
11. Damage to the Product. Qualified service personnel should service the unit in certain situations including
without limitation when:
a. Liquid has spilled or objects have fallen into the product,
b. The product is exposed to water or excessive moisture,
c. The AC power supply plug or cord is damaged,
d. The product shows an inappropriate change in performance or does not operate normally, or
e. The enclosure of the product has been damaged.
SPECIFICATION
FUNCTION
1. Touchscreen: This full-color, multi-touch display shows information relevant to
Mixstream Pro's current operation. Touch the touchscreen (and use the hardware
controls) to control the Mixstream Pro interface.
2. Browse Knob: Turn this knob to navigate through lists. Press the knob to move forward
in the touchscreen or select a song to load on either deck.
Press and hold Shift and press this knob to load the selected track to the Prepare list.
3. Load : Press this button to load the selected track to Deck 1. Quickly double-press this
button to instant double the track currently playing on Deck 2 to Deck 1.
4. Load : Press this button to load the selected track to Deck 2. Quickly double-press this
button to instant double the track currently playing on Deck 1 to Deck 2.
5. Back: Press this button to move back in the touchscreen.
6. View: Press this button to cycle between the Library and Performance views.
Hold Shift and press the View button to switch between simple view or horizontal and
vertical waveform views in Performance Mode.
7. Source / Eject: Press this button to open the Source menu.
Press and hold Shift and press this button to display a list of connected media devices
on the touchscreen. Tap one of the listed media sources to eject that device. To prevent
data corruption, drives must be ejected before being removed from the player.
8.Utility/Preferences / WIFI: Press this button to show the Utility/Preferences menu. See the
User Guide for more information.
Press and hold Shift and press this button to open the Wi-Fi connection menu and
connect to a wireless network.
9. Shift: Press and hold this button to access secondary functions of other controls.
10. Channel Level: Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal
for the channel.
11. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies
for the channel.
12. Filter: Turn this knob to apply a filter to the channel. Starting from the center (12:00)
position, turn it counter-clockwise to apply a low-pass filter, or turn it clockwise to apply
a high-pass filter.
13. FX Select: Press these buttons to enable or disable the selected effect: Echo, Delay,
Flanger or Phaser.
SERVICE MANUAL
MODEL: Mixstream Pro
14.Effects Toggle: Move this toggle switch away from you to activate the selected effect—
the toggle will latch to that position. Pull the toggle back to the center position to
deactivate the effects.
Pull and hold this toggle toward you to activate the selected effect momentarily, and
release the toggle to deactivate the effect—the toggle will return to the center position.
15.Channel Fader: Use this fader to adjust the channel’s volume level.
16. Crossfader: Use the crossfader to mix between Deck 1 and Deck 2.
17. Main Level Meters: These LEDs display the audio signal level of the main mix (sent out
of the Main Outputs).
18. Headphone Preview: Press this button to preview the channel in the headphones. Use
the Headphone Mix knob to adjust the mix between the channel’s pre-fader signal and
the headphones’ cue channel.
19. Headphone Mix: Turn this knob to adjust the blend of the pre-fader and master channels
together in the headphones.
20. Headphone Volume: Adjusts the volume for headphone cueing.
21. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the
wheel is touched and moved.
22. Play/Pause: This button pauses or resumes playback.
Press and hold Shift and then press this button to “stutter-play” the track from the initial
cue point.
23. Pitch Fader: Move this fader to adjust the speed (pitch) of the track.
Press and hold Shift and then press one of the Pitch Bend buttons to adjust the total
range.
24.Pitch Bend –/+: Press and hold one of these buttons to momentarily reduce or increase
(respectively) the speed of the track.
Press and hold Shift and then press one of these buttons to set the range of the pitch
fader.
25. Performance Pads: These pads have different functions on each deck depending on the
current pad mode. See the full User Guide for more information.
26. Cue: Press this button to enter Cue mode. Press the button again to enter a second bank
of cues. To assign a cue to a pad, press a pad at the desired location in the track. To
clear a cue from a pad, press Shift and
the desired pad.
27.Auto Loop: Press this button to enter Auto Loop mode. Press the button again to enter a
second bank of auto loop lengths. To activate an auto loop, press a pad. To deactivate
an auto loop, press the pad again.
28. Roll: Press this button to enter Roll Mode. Press the button again to enter a second bank
of roll lengths. To trigger a roll, press a pad.
29. Main Level: Turn this knob to adjust the volume level of the Main Outputs.
30. Speaker Level: Turn this knob to adjust the volume level of the speakers.
DISASSEMBLY PROCEDURES
1. REMOVAL OF THE BOTTOM CHASSSIS . (Fig1)
(A) TAKE OUT THE 5 PCS VR CAP AND 15 PCS KNOB AND 15 PCS NUTS FROM OF TOP HOUSING.
(B) TAKE OUT THE 16 PCS SCREWS FROM OF BOTTOM CHASSIS.
(Fig.1)
2. REMOVAL OF REAR PCB AND PADDLE PCB AND FRONT PCB. (Fig.2)
(A) REMOVE THE 3 PCS SCREWS AND 3 PCS CONNECTORS BEFORE REMOVAL OF REAR PCB .
(B) REMOVE THE 4 PCS SCREWS AND 2 PCS CONNECTORS BEFORE REMOVAL OF PADDLE PCB .
(C) REMOVE THE 4 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF FRONT PCB .
(Fig.2)
3. REMOVAL OF TOP LEFT&RIGHT (DIP) PCB AND SENSOR PCB AND TOUCH PCB AND FILTER1 PCB
AND CUE PCB. (Fig.3)
(A) REMOVE THE 14 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP RIGHT PCB DIP
ASSEMBLY .
(B) REMOVE THE 2 PCS SCREWS BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(C) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP LEFT FILTER1 PCB DIP
ASSEMBLY.
(D) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(E) REMOVE THE 2 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP LEFT CUE PCB DIP
ASSEMBLY.
(F) REMOVE THE 14 PCS SCREWS BEFORE REMOVAL OF TOP LEFT PCB DIP ASSEMBLY.
(G) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(H) REMOVE THE 5 PCS SCREWS BEFORE REMOVAL OF 7 INCH CTP+TFT ASSEMBLY.
(Fig.3)
Autres manuels pour MIXSTREAM PRO
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Numark Matériel de DJ
Numark
Numark NS7II Manuel utilisateur
Numark
Numark 4TRAK Manuel utilisateur
Numark
Numark Mixtrack Quad Manuel utilisateur
Numark
Numark M1 Guide de démarrage rapide
Numark
Numark DDS80 Manuel utilisateur
Numark
Numark cdmix usb Manuel utilisateur
Numark
Numark Fusion111 Document technique
Numark
Numark D2 Director Manuel utilisateur
Numark
Numark NV Manuel utilisateur
Numark
Numark Mixtrack pro II Manuel utilisateur
Numark
Numark X5 Manuel utilisateur
Numark
Numark PARTY MIX Manuel utilisateur
Numark
Numark CDMIX3 Manuel utilisateur
Numark
Numark MIXTRACK NKC4 Manuel utilisateur
Numark
Numark dashboard Manuel utilisateur
Numark
Numark DDS80 Manuel utilisateur
Numark
Numark NS6 Manuel utilisateur
Numark
Numark PT01 Scratch Manuel utilisateur
Numark
Numark Mixtrack Quad Manuel utilisateur
Numark
Numark NV Manuel utilisateur
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur