Numark DJ2Go2 Manuel utilisateur

User Guide

English ( 2 – 5 )

Guía del usuario

Español ( 6 – 9 )

Guide d’utilisation

Français ( 10 – 13 )

Guida per l’uso

Italiano ( 14 – 17 )

Benutzerhandbuch

Deutsch ( 18 – 21 )

Appendix

English ( 22 )

User Guide (English)

Introduction

Box Contents

DJ2GO2 Touch

Mini-USB Cable

Software Download Card

1/8”-to-stereo-RCA Cable

Quickstart Guide

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit numark.com.

For additional product support, visit numark.com/support.

For complete warranty information: numark.com/warranty.

Setup

Items not listed under Introduction >Box Contents are sold separately.

Before you can begin using DJ2GO2 Touch with your computer, you must install a DJ software

application on your computer.

1. With a DJ software application installed on your computer, connect DJ2GO2 Touch to an

available USB port on your computer. (If possible, use a USB port on the rear panel of your

computer.)

2. On your computer, open your DJ software application.

3. Once the software opens, search for your music, video, and/or karaoke files.

4. Once a supported file is found, load the file to one of the software decks.

5. Repeat the process to assign a file to the other software deck.

Speakers

Headphones

Computer

Features

Top Panel

1. Mini-USB Port: Plug the included mini-USB cable into this port and into the USB port of

your computer to power DJ2GO2 Touch. DJ2GO2 Touch is class-compliant, so it is

"plug-and-play" – no separate driver installation is necessary.

2. PFL / Cue: Sends pre-fader audio to the Cue channel for monitoring.

3. Cue Gain: Adjusts the audio level of the Cue channel.

4. Master Gain: Adjusts the output volume of the Program mix.

5. Browse Knob: Turn this knob to scroll through a list of tracks and directories/folders in

the software. Press this knob to enter a directory/folder.

6. Load 1 / Load 2: Press one of these buttons while a track is selected to assign it to Deck

1 or Deck 2, respectively.

7. Channel Gain: Adjusts the audio level for the corresponding channel.

8. Crossfader: Blends audio playing between Decks 1 and 2. Sliding this to the left plays

Deck 1 and sliding to the right plays Deck 2.

9. Pad Mode: This determines the function of the 4 pad bank buttons. The 4 options are:

Hot Cue, Auto Loops, Manual Loops, and Sampler.

10. Jog Wheel: Move the touch capacitive wheel to control the playback position and scroll

throughout the current song.

11. Play / Pause: Starts or resumes playback if the Deck is paused. Pauses playback if the

Deck is playing. The LED will be OFF when there is no track loaded. The LED will flash

when a track is paused. The LED will be ON when a track is playing.

12. Buttons 1-4: These buttons send momentary MIDI messages based on the set Pad

Mode. See Operation > Pad Mode Controls for more information.

13. Cue: The Cue button will return and pause the track at the last set cue point. For

temporary play of the cue point, hold down the Cue button. The track will play for as long

as the button is held down and will return to the cue point once it has been released.

Hold down Cue and Play / Pause simultaneously to start playback from the cue point.

Release both buttons to allow playback to continue.

14. Sync: Press to automatically match the corresponding deck's tempo with the other

deck's tempo.

15. Pitch Fader: Controls the track's playback speed.

16. 1/8” (3.5 mm) Main Output: Connect this audio output to a mixer, powered speakers, or

an audio recorder.

17. 1/8” (3.5 mm) Headphone Output: Connect your headphones to this audio output.

Operation

Pad Mode Controls

1. Cues: This Pad Mode button switches Buttons 1-4 to Hot Cue Mode.

2. Auto Loop: This Pad Mode button switches Buttons 1-4 to trigger loops (loop bar value is

set in your software).

Pad 1 - 1 beat

Pad 2 - 2 beats

Pad 3 - 4 beats

Pad 4 - 8 beats

3. Manual Loop: This Pad Mode button switches Buttons 1-4 to manually control looping.

In Manual Loop mode:

Pad 1 - Loop In Set Point

Pad 2 - Loop Out Set Point

Pad 3 - Loop On/Off

Pad 4 - Retrigger Loop

4. Sampler: This Pad Mode button switches Buttons 1-4 to Sampler Mode to trigger

samples.

Beat-Matching and Mixing with DJ2GO2 Touch

Below is an example of how to mix tracks using DJ2GO2 Touch:

1. Turn the Browse knob to scroll through your music library.

2. Load tracks with similar BPM onto Decks 1 and 2 by pressing the Load 1 and

Load 2 buttons on DJ2GO2 Touch.

3. Start with the Gain knobs at the 12 o’clock position. You can adjust these for more

or less signal gain after the tracks are loaded.

4. In your software, ensure the Cue Mix knob is adjusted to

the desired position for CUE (headphone output) and

MSTR (master mix output).

5. Move the crossfader all the way to the left to send the audio from Deck 1 to the

main outputs. If you are listening through the headphone output, adjust the Cue

Gain knob.

6. Play the track that is loaded on Deck 1.

7. Press the PFL button on Deck 2, and adjust the Cue Gain knob to preview the

audio through the headphone output.

8. Play the track that is loaded on Deck 2 to preview it in your headphones.

9. While the track is playing, press the Cue button to return to the beginning of the

track.

10. (Auto) Press Sync on Deck 2 to auto-match its BPM with Deck 1. Press play and the songs

should be in sync.

11. (Manual) Move the pitch slider so the BPM in the software matches with Deck 1. Press play on

the downbeat, then use the wheel to align the beats together.

12. Move the crossfader on DJ2GO2 Touch toward the right to crossfade from Deck 1 to Deck 2.

Autres manuels pour DJ2Go2

Table des matières

Autres manuels Numark Matériel de DJ

Numark

Numark M2 Manuel utilisateur

Numark

Numark Mixtrack Manuel utilisateur

Numark

Numark NS7III Manuel utilisateur

Numark

Numark MixTrack Pro FX Manuel utilisateur

Numark

Numark MixTrack Pro FX Manuel utilisateur

Numark

Numark MIXTRACK PLATINUM FX Manuel utilisateur

Numark

Numark DXM01 Document technique

Numark

Numark M1 Guide de démarrage rapide

Numark

Numark NV Manuel utilisateur

Numark

Numark C2 Manuel utilisateur

Numark

Numark MIXTRACK PLATINUM Manuel utilisateur

Numark

Numark DJ2Go2 Manuel utilisateur

Numark

Numark NPM5 Manuel utilisateur

Numark

Numark NS6 II Manuel utilisateur

Numark

Numark AXIS 9 Manuel de service

Numark

Numark NuVJ Manuel utilisateur

Numark

Numark MIXDECK EXPRESS Manuel utilisateur

Numark

Numark PARTY MIX LIVE Manuel utilisateur

Numark

Numark MIXDECK EXPRESS Manuel utilisateur

Numark

Numark NDX500 Manuel utilisateur

Numark

Numark 4TRAK Manuel utilisateur

Numark

Numark Mixtrack pro II Manuel utilisateur

Numark

Numark IDJ PRO Manuel utilisateur

Numark

Numark MIXDECK EXPRESS Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur