Numark NS7 Manuel utilisateur

SPECIFICATION

FUNCTION

1. GAIN TRIM – Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the software.

2. CHANNEL TREBLE – Adjusts the high (treble) frequencies.

3. CHANNEL MID – Adjusts the mid-range frequencies.

4. CHANNEL BASS – Adjusts the low (bass) frequencies.

5. CHANNEL FADER – Adjusts the audio level on the corresponding channel in the software.

6. CROSSFADER – Blends audio between the channels assigned to the left and right side of the crossfader.

7. MASTER VOLUME – Adjusts the output volume of the Program Mix.

8. BOOTH VOLUME – Adjusts the output volume of the BOOTH OUTPUT mix.

9. HEADPHONE MIX – Blends the pre-fader audio playing on Channels 1 and 2. Sliding this to the left plays Channel 1. Sliding to the right plays

Channel 2.

10. HEADPHONE MODE – Selects the audio that is sent to the headphones. Switch it to “MASTER” to hear the Program Mix. Switch it to “CH1

CH2” to hear a mix of Channels 1 and 2 in the headphones.

11. MASTER OUTPUT (BALANCED) – Connect this low-impedance XLR output to a PA system or powered monitors The level of this output is

controlled with the MASTER knob on the top panel.

12. MASTER OUTPUT (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system The level of this output is

controlled by the MASTER knob on the top panel.

13. BOOTH OUTPUT (RCA) – Use standard RCA cables to connect this output to a booth monitoring system The level of this output is controlled

by the BOOTH knob on the top panel.

14. SYNC – Automatically matches the corresponding Deck’s tempo with the other Deck’s tempo.

15. RELOOP – Press this to jump to the start of the loop and enable it. If the Deck is already looping when you press it,

Pointer will jump to the start

of the loop and continue. If no loop is set, nothing will happen.

16. 1/2 X – Press this to halve the length of the selected loop.

17. 2 X – Press this to double the length of the selected loop.

18. STRIP SEARCH – The length of this strip represents the length of the entire track. Place your finger on a point along this sensor to jump to that

point in the track. (If you want to scroll through a track, we recommend using your computer rather than running 'your finger along the strip.)

19. TAP – Tap this button at the same tempo as the track to help the software detect a more accurate BPM reading.

20. CRATES – Press this to move the selector to the Crates Panel in the software

SERVICE MANUAL

MODEL:NS7

STANDARD

1. MaxMSP test program for production Line

2. AP fest specification

RCA Balance Output

Voltage AC 100V~240V 50~60Hz

MASTER:3.5



0.5V

Volume BOOTH:3.5



0.5V

BALANCED:12



Distortion defection 0.02% below

S/ N 96dBr upward

Separation 94dBr upward

F/R 20~20KHz



0.5dB

1. When test is in progress , gain on Input and headphone is set at Max. volume.

Headphone : UN Balanced:

2. 300mV 1KHz Sin wave form is input to left plug of Aux Input

Volume 7V



S/N 85dBr upward

Distortion defection 0.05% below

F/R 20~20KHz



1dB

DISASSEMBLY PROCEDURES



(A) REMOVAL 42 PCS OF SCREWS BEFORE REMOVE THE BOTTOM CHASSIS.





(A) REMOVE THE 1 PC NUT.

(B) REMOVE THE 4 PCS OF SCREWS.

(D) REMOVE THE 3 PCS OF SCREWS.

(E) REMOVE THE 1 PC CONNECTORS BEFORE REMOVAL OF XFADER PCB.

(F) REMOVE THE 1 PC NUT.

(G) REMOVE THE 5 PCS OF SCREWS.

(H) REMOVE THE 1 PC CONNECTORS BEFORE REMOVAL OF INPUT PCB.



  

  

(A) REMOVE THE 4 PCS OF SCREW.

(B) REMOVE THE 4 PCS CONNECTOR.

(D) REMOVE THE 8 PCS OF SCREWS.

(E) REMOVE THE 6 PCS CONNECTOR BEFORE REMOVAL OF MOTOR PCB(L&R).

(F) REMOVE THE 4 PCS OF SCREW.

(G) REMOVE THE 2 PCS CONNECTOR BEFORE REMOVAL OF SWITCH POWER.

(H) REMOVE THE 3 PCS OF SCREW.

(I) REMOVE THE 3 PCS CONNECTOR BEFORE REMOVAL OF POWER PCB.



  

(A) REMOVE THE 3 PCS OF VR KNOB.

(B) REMOVE THE 19 PCS OF SCREW.

(D) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(L).

(E) REMOVE THE 12 PCS OF KNOB AMD 7 PCS NUT.

(F) REMOVE THE 5 PCS OF SCREW.

(G) REMOVE THE 4 PCS OF BRASS STANDOFF

(H) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF MIXER PCB.

( I ) REMOVE THE 3 PCS OF VR KNOB.

(J ) REMOVE THE 4 PCS OF BRASS STANDOFF.

(K) REMOVE THE 3 PCS OF BRASS STANDOFF.

(L) REMOVE THE 19 PCS OF SCREW.

(M) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(R).

 



! !

(A) REMOVE THE 4 PCS OF VR KNOB

(B) REMOVE THE 8 PCS SCREW BEFORE REMOVAL OF FRONT PANEL.

(D) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF CROSS FADER PCB.

(E) REMOVE THE 4 PCS OF SCREW.

(F) REMOVE THE 2 PCS CONNECTOR BEFORE REMOVAL OF FADER PCB.(L&R)

(G) REMOVE THE 4 PCS OF SCREW.

(H) REMOVE THE 1 PC CONNECTOR BEFORE REMOVAL OF METER PCB.

!

Autres manuels pour NS7

Table des matières

Autres manuels Numark Matériel de DJ

Numark

Numark CDMIX3 Manuel utilisateur

Numark

Numark NS7II Manuel utilisateur

Numark

Numark 4TRAK Manuel utilisateur

Numark

Numark DXM01 Document technique

Numark

Numark iCDMIX 2 Manuel utilisateur

Numark

Numark Orbit Manuel utilisateur

Numark

Numark NDX 400 Manuel utilisateur

Numark

Numark MIXDECK EXPRESS Manuel utilisateur

Numark

Numark NV Manuel utilisateur

Numark

Numark iDJ Document technique

Numark

Numark DDS80 Manuel utilisateur

Numark

Numark NS7FX Manuel utilisateur

Numark

Numark CM200USB Manuel utilisateur

Numark

Numark 4TRAK Manuel utilisateur

Numark

Numark DDS Manuel utilisateur

Numark

Numark NS7 Manuel utilisateur

Numark

Numark MIXSTREAM PRO Manuel utilisateur

Numark

Numark NuVJ Manuel utilisateur

Numark

Numark BCM135 Manuel utilisateur

Numark

Numark OMNI CONTROL Manuel d'instructions

Numark

Numark NS4 FX Manuel utilisateur

Numark

Numark Party Mix Pro Manuel utilisateur

Numark

Numark PARTY MIX Manuel utilisateur

Numark

Numark NS7II Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur