Nortel DMS-250 Manuel utilisateur

MWC14 (CSP14) Standard 23.01 March 2001

297-2521-106

Digital Switching Systems

DMS-250

ISDN Reference Manual

Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)

Digital Switching Systems

DMS-250

ISDN Reference Manual

1997–2001 Northern Telecom

Printed in the United States of America

NORTHERN TELECOM CONFIDENTIAL: The information contained in this document is the property of Northern

Telecom. Except as specifically authorized in writing by Northern Telecom, the holder of this document shall keep the

information contained herein confidential and shall protect same in whole or in part from disclosure and dissemination to third

parties and use same for evaluation, operation, and maintenance purposes only.

Information is subject to change without notice. Nortel Networks reserves the right to make changes in design or components

as progress in engineering and manufacturing may warrant.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC

Rules, and the radio interference regulations of Industry Canada. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at the user’s own expense.

The SL-100 system is certified by the Canadian Standards Association (CSA) with the Nationally Recognized Testing Laborato-

ry (NRTL).

This equipment is capable of providing users with access to interstate providers of operator services through the use of equal

access codes. Modifications by aggregators to alter these capabilities is a violation of the Telephone Operator Consumer

Service Improvement Act of 1990 and Part 68 of the FCC Rules.

DMS

MAP, NORTEL, NORTEL NETWORKS, NORTHERN TELECOM, NT,

and

SUPERNODE

are trademarks of Nortel

Networks Corporation.

Publication number: 297-2521-106

Product release: MWC14 (CSP14)

Document release: Standard 23.01

Date: March 2001

Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)

iii

Publication history

March 2001 Standard 23.01 for software release MWC14 (CSP14). MCI has been

globally replaced with MWC (MCIWorldcom).

The following information has been added:

•RLT/ATP (A60008836)

•Fraud Call Interrrupt (A60008839)

February 2000Standard 22.01 for software release MCI18 (CSP12).

The following information has been added:

•PRI Progress Indicator Transport (A60007169)

April 1999 Standard Release 21.01 for release MCI16 (CSP10).

The following information has been added:

•MAUUI Over Release Message for NCAUUI (AX1408)

•PRI Connected Number Transport (AX1414)

•MAUUI In First Call Clearing Message Before Connect (A60006311)

Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)

Contents

About this document xv

When to use this document xv

Intended audience xv

How this book is organized xv

Intended audience xvii

Applicability of this document xvii

How to check the version and issue of this document xvii

References in this document xviii

What precautionary messages mean xviii

How commands, parameters, and responses are represented xix

Input prompt (>) xx

Commands and fixed parameters xx

Variables xx

Responses xx

Introduction 1-1

Primary rate interface 1-1

Q.931 signaling protocol 1-2

Protocol overview 1-2

OSI protocol layers 1-2

ISDN protocol layers 1-4

Layer 1 (physical) protocol 1-5

Layer 2 (link) protocols 1-5

Layer 3 (network) protocols 1-6

Layer 4 (application) protocols 1-6

DS-1 configuration 2-1

Introduction 2-1

Hardware configuration 2-1

Commissioning 2-3

Frame formats 2-3

Channel ordering sequence 2-5

Line coding 2-6

Network customer terminating equipment and cross-connect point 2-7

Test equipment requirements 2-9

Performance and maintenance 2-10

Performance group alarms 2-10

Carrier group alarms 2-10

Alarms 2-10

Display fields 2-11

vi Contents

297-2521-106 Standard 23.01 March 2001

TRAVER enhancements 2-13

Originations on PRA250 trunks 2-13

Datafill trace 2-14

D-channel handler 3-1

Introduction 3-1

Hardware configuration 3-1

Functionality 3-1

Installation 3-2

Loading the D-channel handler from the MAP terminal 3-3

Returning the D-channel handler to service 3-3

Checking the D-channel handler load name 3-3

Verification 3-3

Running internal continuity tests 3-3

Running the read-only memory tests 3-3

Running the external continuity test 3-3

Troubleshooting 3-4

Test equipment 3-4

PRI D-channel backup 3-5

Terminology 3-5

Background 3-5

Configuration for D-channel backup 3-5

MAP commands for D-channel maintenance 3-6

D-channel back-up interactions 3-6

Message structure and function 4-1

Message structure 4-1

Mandatory information elements 4-1

Protocol discriminator 4-1

Call Reference 4-2

Message Type 4-2

Other information elements 4-2

Bearer Capability 4-2

Call State 4-2

Called Party Number 4-2

Called Party Subaddress 4-2

Calling Party Number 4-2

Calling Party Subaddress 4-3

Cause 4-3

Change Status 4-3

Channel Identification 4-3

Congestion Level 4-4

Connected Number 4-4

Display 4-4

Facility 4-4

Generic Digits 4-4

Higher Layer Compatibility 4-4

Information Request 4-4

Lower Layer Compatibility 4-5

More Data 4-5

Network-Specific Facilities 4-5

Contents vii

Digital Switching Systems DMS-250 ISDN Reference Manual MWC14 (CSP14)

Notification Indicator 4-6

Original Called Number 4-6

Progress Indicator 4-6

Redirecting Number 4-6

Redirection Number 4-6

Restart Indicator 4-7

Transit Network Selection 4-7

User-to-User 4-7

Locking shift to codesets 4-7

Message functions 4-7

Q.931 message descriptions 4-8

Q.931 message information elements 4-14

Q.932 message descriptions 4-21

Q.932 message information elements 4-22

Congestion and Network Flow Control 4-23

User Congestion 4-23

Network Flow Control 4-23

User Congestion and Network Flow Control Interaction 4-23

Call control procedures 5-1

Introduction 5-1

DMS-250 switch functions and services 5-1

Switch network parameter 5-1

Call establishment at the originating exchange 5-3

User call request 5-3

Call types supported 5-4

Network control system 5-4

Call authorization 5-4

Call translation 5-5

Translation example 5-5

B-channel allocation and negotiation 5-8

Call proceeding and termination 5-9

Call establishment at the terminating exchange 5-10

Network call request with SETUP message 5-10

Selection of PRI B-channel for termination 5-10

Terminations and user responses 5-11

Terminating to a PRI 5-11

Termination to a PBX 5-13

Termination to a non-ISDN trunk 5-13

Termination to Enhanced Voice Services ARU 5-16

Reseller switch setup and release 5-22

Suppcode collection 5-22

Call takedown for normal call clearing 5-24

User-initiated normal call clearing 5-24

Network-initiated normal call clearing 5-25

Disconnection of an EVS call 5-26

Cause and treatment handling 5-29

Standard cause and treatment handling 5-30

Enhanced cause and treatment handling 5-31

Q.931 cause values 5-32

Location codes 5-32

viii Contents

297-2521-106 Standard 23.01 March 2001

Mapping of cause values to treatment 5-33

Mapping of treatments to cause values 5-35

Exception conditions 5-37

B-channel glare 5-38

B-channel lockout 5-40

No response to SETUP message 5-42

No response after a CALL PROC message 5-43

Protocol violations 5-43

PRI interworking 6-1

Agents 6-1

Originators 6-1

Enhanced digital recorded announcements 6-2

PRI to ISUP 6-2

PRI-to-ISUP-to-PRI 6-4

Non-ISUP trunks 6-7

PRI-to-PTS 6-8

PTS to PRI 6-9

Originating Line Information (OLI) 6-9

OLI delivery on PRI termination 6-10

Feature interaction 7-1

Introduction 7-1

Integrated services access 7-1

Call types supported 7-2

Invalid call types 7-2

Identifying call type 7-2

PRI origination and call type 7-3

PTS origination and terminating PRI call type 7-5

Call type mapping 7-6

Translation and routing options 7-8

Off network dialing 7-12

On network dialing—VNET 7-14

Public speed dialing—DDD/VNET 7-15

Ten-digit routing 7-15

Test calls 7-18

IEC screening and routing 7-18

Restricted usage by date and time 7-18

Incoming exclusion 7-19

Time-of-day routing 7-19

Trunk group class-of-service screening 7-20

Retranslation 7-20

Satellite screening 7-20

Identifying voice/data and transmission rate—bearer capability 7-20

Data calls 7-21

Data call cause handling 7-22

Route advancing 7-23

Identifying call origin—calling number delivery 7-23

SETUP message 7-24

PTS-to-PRI call 7-25

SS7 network interworking 7-25

Table des matières

Autres manuels Nortel Changer

Nortel

Nortel BayStack 5510-24T Manuel utilisateur

Nortel

Nortel 2230 Dimensions

Nortel

Nortel 1200N Manuel utilisateur

Nortel

Nortel BayStack 325-24G Manuel utilisateur

Nortel

Nortel Passport 4400 Series Instructions de montage

Nortel

Nortel Contivity 600 Manuel utilisateur

Nortel

Nortel Passport 241-5101-200 Manuel utilisateur

Nortel

Nortel DMS-100 Series Manuel utilisateur

Nortel

Nortel BayStack 5520-24T-PWR Manuel utilisateur

Nortel

Nortel 2350 Manuel utilisateur

Nortel

Nortel 50 Series Manuel utilisateur

Nortel

Nortel BayStack 450-24T Mode d’emploi

Nortel

Nortel BayStack 5520-48T-PWR Guide de référence

Nortel

Nortel 2300 Series Manuel de service

Nortel

Nortel CVX 600 Manuel

Nortel

Nortel Contivity1510D Manuel de service

Nortel

Nortel 8005DC Manuel utilisateur

Nortel

Nortel BayStack 60-12T Manuel d'installation et d'exploitation

Nortel

Nortel 4600 Mode d’emploi

Nortel

Nortel Versalar 15000 Guide de démarrage rapide

Nortel

Nortel Versalar 15000 Manuel utilisateur

Nortel

Nortel Ethernet Routing Switch 8000Series Instructions de montage

Nortel

Nortel WLAN 2300 Series Manuel de l'opérateur

Nortel

Nortel 8000 Series Mode d’emploi

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur