Nortel BayStack 5520-48T-PWR Manuel utilisateur

ERS 5000 Series Installation

Release: 6.0

Document Revision: 04.03

www.nortel.com

NN47200-300

Release: 6.0

Publication: NN47200-300

Document release date: 13 April 2009

Printed in Canada

This document contains Nortel confidential and proprietary information. It is not to be copied, disclosed or

distributed in any manner, in whole or in part, without Nortel’s express written authorization. While the information

in this document is believed to be accurate and reliable, except as otherwise expressly agreed to in writing

NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER

EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without

notice.

Contents

Regulatory information and safety precautions 7

International regulatory statements of conformity 7

National electromagnetic compliance (EMC) statements of compliance 7

National safety statements of compliance 11

National Environmental Statements of Compliance 12

Restriction on Hazardous Substances Directive Compliance Statement 12

WEEE Directive Compliance Statement 13

Translations of safety messages 13

Safety messages 13

New in this Release 19

Features 19

Other changes 19

Document changes 19

5600 Series power options 19

Introduction 21

Installation fundamentals 23

Electrostatic discharge prevention 23

Ethernet Routing Switch 5000 series models 24

Common hardware features 27

Universal Serial Bus ports on the Nortel Ethernet Routing Switch 5000

Series 28

Placement options and cables 29

Environmental requirements 29

Placement options 29

Single and multiple switch arrangements 31

Identifying cables to use with the Ethernet Routing Switch 39

Connecting a transceiver to the switch or switch stack 40

Understanding transceiver connections 40

Preparing for power requirements of the switch 42

Nortel Ethernet Routing Switch 5510-24T and 5510-48T 43

Nortel Ethernet Routing Switch 5520-24T-PWR and 5520-48T-PWR 43

Nortel Ethernet Routing Switch 5530-24TFD 44

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

5500 Series power options 44

5600 Series power options 46

Ordering the phone dongle 49

Installing the switch 51

Installation tasks 51

Installation Preparation 53

Switch placement 53

Power connection 54

Hardware installation verification 55

Preparations for network connectivity 56

IP address information configuration 57

Stack configuration 58

Procedures for installation of the switch 61

Installation preparation 61

Verifying environment suitability 61

Verifying the contents of the box 64

Switch placement 66

Mounting on a table or shelf 66

Mounting on a wall 68

Installing a front mounted switch in an equipment rack 70

Installing a rear mounted switch in an equipment rack 71

Power connection 73

Installing a power supply module in a 5600 Series switch 73

Connecting an AC cord to switch 74

Installing a redundant power supply in a 5500 Series switch 75

Installing DC-DC converter in a 5500 Series switch 76

Connecting a DC power source to a 5600 Series switch 77

Hardware installation verification 77

Checking LEDs 77

Preparations for network connectivity 81

Cabling a standalone switch 81

Installing transceivers 82

IP address information configuration 83

Connecting a console 83

Accessing the console menu 84

Assigning IP parameters using the console menu 84

Assigning IP parameters using the console menu and NNCLI 85

Assigning IP parameters using the UI button 86

Assigning IP parameters using Web-based Management 86

Verifying assigned IP address is reachable 88

Stack configuration 88

Cabling a stack 89

Selecting a base unit 92

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

Selecting a base unit using the UI button 92

Setting non-base units 93

Setting non-base units using the UI button 93

Resetting a stack using the UI button 94

Common procedures 95

Abandoning a command 95

Installation reference 97

RJ-45 connector pin assignments 97

Nortel Ethernet Routing Switch 5510 and 5530 97

Console port pin assignments 98

AC power cord specifications 98

Nortel Ethernet Routing Switch 5520-24T-PWR and 5520-48T-PWR 99

Power specifications 100

Nortel Ethernet Power Supply 10 power specification 100

Nortel Ethernet Redundant Power Supply 15 power specification 100

Nortel Ethernet DC-DC converter module 100

Procedures

Abandoning a command entered using the UI button 95

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

Regulatory information and safety

precautions

This module contains the international regulatory statements of conformity

and safety precautions and translations for the Nortel Ethernet Routing

Switch 5500 Series.

International regulatory statements of conformity

This is to certify that the Nortel Networks Ethernet Routing Switch 5500

Series equipment was evaluated to the international regulatory standards

for electromagnetic compliance (EMC) and safety and were found to have

met the requirements for the following international standards:

•EMC - Electromagnetic Emissions - CISPR 22, Class A

•EMC - Electromagnetic Immunity - CISPR 24

•Electrical Safety - IEC 60950, with CB member national deviations

Further, the equipment has been certified as compliant with the national

standards as detailed below.

For regulatory statements of conformity and safety precautions and

translations for the Nortel Ethernet Routing Switch 5600 Series, see

Nortel Ethernet Routing Switch 5600 Series Regulatory Information

(NN47201-101).

National electromagnetic compliance (EMC) statements of

compliance FCC statement (USA Only)

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the Federal Communications

Commission (FCC) rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy. If it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

8Regulatory information and safety precautions

communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case users will be required to take

whatever measures may be necessary to correct the interference at their

own expense.

ICES statement (Canada only)

Canadian Department of Communications Radio Interference Regulations

This digital apparatus (Nortel Ethernet Routing Switch 5500 Series)

does not exceed the Class A limits for radio-noise emissions from

digital apparatus as set out in the Radio Interference Regulations of the

Canadian Department of Communications.

Règlement sur le brouillage radioélectrique du ministère des

Communications

Cet appareil numérique (Nortel Ethernet Routing Switch 5500 Series)

respecte les limites de bruits radioélectriques visant les appareils

numériques de classe A prescrites dans le Règlement sur le brouillage

radioélectrique du ministère des Communications du Canada.

CE marking statement (Europe only)

EN 55022 statements

This is to certify that the Nortel Ethernet Routing Switch 5500 Series

equipment is shielded against the generation of radio interference in

accordance with the application of Council Directive 2004/108/EC.

Conformity is declared by the application of EN 55022 Class A (CISPR

22). CAUTION

This device is a Class A product. In a domestic environment,

this device can cause radio interference, in which case the user

may be required to take appropriate measures.

EN 55024 statement

This is to certify that the Nortel Ethernet Routing Switch 5000 Series

equipment is shielded against the susceptibility to radio interference

in accordance with the application of Council Directive 2004/108/EC.

Conformity is declared by the application of EN 55024 (CISPR 24).

EN 300386 statement

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

National electromagnetic compliance (EMC) statements of compliance 9

The Ethernet Routing switch 5500 Series complies with the requirements

of EN 300386 V1.3.3 for emissions and for immunity for a Class A device

intended for use in either Telecommunications centre or locations other

than telecommunications centres given the performance criteria as

specified by the manufacturer.

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

10 Regulatory information and safety precautions

European Union and European Free Trade Association (EFTA) notice

All products labeled with the CE marking comply with R&TTE

Directive (1999/5/EEC) which includes the Electromagnetic

Compliance (EMC) Directive (2004/108/EC) and the Low

Voltage Directive (2006/95/EC) issued by the Commission of the

European Community.

Compliance with these directives implies conformity to the following

European Norms (ENs). The equivalent international standards are listed

in parenthesis.

•EN 55022 (CISPR 22)–Electromagnetic Interference

•EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)–Electromagnetic

Immunity

•EN 61000-3-2 (IEC 610000-3-2)–Power Line Harmonics

•EN 61000-3-3 (IEC 610000-3-3)–Power Line Flicker

VCCI statement (Japan/Nippon only)

This is a Class A product based on the standard of the Voluntary Control

Council for Interference (VCCI) for information technology equipment.

If this equipment is used in a domestic environment, radio disturbance

may arise. When such trouble occurs, the user may be required to take

corrective actions.

BSMI statement (Taiwan only)

This is a Class A product based on the standard of the Bureau of

Standards, Metrology and Inspection (BSMI) CNS 13438, Class A.

MIC notice (Republic of Korea only)

This device has been approved for use in Business applications only per

the Class A requirements of the Republic of Korea Ministry of Information

and Communications (MIC). This device may not be sold for use in a

non-business application.

ERS 5000 Series Installation

NN47200-300 04.03

13 April 2009

Autres manuels pour BayStack 5520-48T-PWR

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nortel Changer

Nortel

Nortel 1600 Series Mode d’emploi

Nortel

Nortel 2350 Manuel utilisateur

Nortel

Nortel 2500 Seriess Manuel de l'opérateur

Nortel

Nortel 425-48T Manuel utilisateur

Nortel

Nortel 251 Manuel utilisateur

Nortel

Nortel Passport 2430 Schéma de câblage

Nortel

Nortel DMS-250 Manuel utilisateur

Nortel

Nortel BayStack 400-S Manuel utilisateur

Nortel

Nortel BayStack 450-12F Manuel utilisateur

Nortel

Nortel Application Switch Manuel utilisateur

Nortel

Nortel Passport 1424T Mode d’emploi

Nortel

Nortel Versalar 15000 Manuel utilisateur

Nortel

Nortel Passport Module 8672A Mode d’emploi

Nortel

Nortel BayStack 420-24T Manuel utilisateur

Nortel

Nortel 4050 Guide rapide

Nortel

Nortel 1200N Manuel utilisateur

Nortel

Nortel Passport 4400 Series Manuel

Nortel

Nortel Passport 8608GTE Manuel utilisateur

Nortel

Nortel Passport 8608 Manuel utilisateur

Nortel

Nortel 4070 Manuel utilisateur

Nortel

Nortel BayStack 100-S Mode d’emploi

Nortel

Nortel Passport 8600 Series Manuel utilisateur

Nortel

Nortel 5500 series Manuel utilisateur

Nortel

Nortel DMS-100 Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur