Norac UC5 Topcon X30 Manuel utilisateur
Spray Height Controlle
r
GVM (Prowler)
Enhanced Stability
In
sta
ll
at
i
o
n
M
a
n
ua
l
GV01
Printed in Canada
Copyright 2009 by NORAC Systems International Inc.
Reorder P/N: UC5-BC-GV01-INST Rev E (GVM Prowler Enhanced Stability)
NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and
without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information
contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
Contents
1Introduction.....................................................................................................1
2General UC5 System Layout.........................................................................2
3Kit Parts ...........................................................................................................3
4Pre-Install Checklist .......................................................................................7
5Ultrasonic Sensor Installation .......................................................................8
6Roll Sensor Installation ............................................................................... 13
7Module Installation ...................................................................................... 16
8Connecting the Sensors to the CANbus................................................... 20
9Hydraulic Installation .................................................................................. 21
10 Software Setup............................................................................................. 24
11 Cable Drawings ............................................................................................ 25
1
1Introduction
Congratulations on your purchase of the NORAC UC5 Spray Height Controller. This system
is manufactured with top quality components and is engineered using the latest technology to
provide operating reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage, improve
sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the system. A
thorough understanding of this manual will ensure that you receive the maximum benefit from
the system.
Your input can help make us better! If you find issues or have suggestions regarding the parts
list or the installation procedure, please don’t hesitate to contact us.
Every effort has been made to ensure the accuracy of the information contained in
this manual. All parts supplied are selected to specially fit the sprayer to facilitate
a complete installation. However, NORAC cannot guarantee all parts fit as
intended due to the variations of the sprayer by the manufacturer.
Please read this manual in its entirety before attempting installation.
2
2General UC5 System Layout
Figure 1 illustrates the general layout of the UC5 system components:
Figure 1: General UC5 System Layout
3
3Kit Parts
3.1 Kit Overview
Figure 2: GV01 System Parts
4
3.2 Hydraulic Plumbing
Figure 3: GV01 Hydraulic Plumbing
5
3.3 List of Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
B10 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1
C01 43220-07 CABLE UC5 NETWORK 14 AWG 7M 2
C02 43220-01 CABLE UC5 NETWORK 14 AWG 1M 1
C03 43210-03 CABLE UC5 NETWORK 18 AWG 3M 2
C04 43210-01 CABLE UC5 NETWORK 18 AWG 1M 2
C05 43210-20 CABLE UC5 NETWORK 18 AWG 20M 2
C10 43230-04 CABLE UC5 VALVE 2PIN DT TO 2PIN DT 4
C20 43240-01 CABLE UC5 INTERFACE TILT DT 1
C21 43240-07 CABLE UC5 INTERFACE MAIN DT (WITH AUX 1 & 2) 1
C30 43250-09 CABLE UC5 BATTERY GP TEE 1
E01 43710 UC5 CONTROLLER MODULE 1
E02 43720 UC5 VALVE MODULE 1
E03 43732 UC5 INPUT MODULE PASS THRU 1
E04 43741* UC5 ROLL SENSOR VER. 2 3
E05 43750 UC5 ULTRASONIC SENSOR 3
E10 43760 UC5 NETWORK COUPLER 3-WAY 1
E11 43765 UC5 NETWORK COUPLER 8-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 3
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
H01 44863-44 HOSE 122R2-06 270 IN L 6FJX90 3/8IN NPT WITH QUICK COUPLER 1
H02 44863-45 HOSE 122R2-06 270 IN L 6FJX90 1/4IN NPT WITH QUICK COUPLER 1
H03 44862-19 HOSE ASSEMBLY 122R2-04 20 IN L 4FJX 4FJX90 2
H10 44865-52 HYDRAULICS FITTING KIT - GV1 1
M02 UC5-BC-GV01-INST MANUAL INSTALLATION UC5 GVM (PROWLER) 1
P01 106034 UC5 NETWORK 2 PIN PLUG 4
P02 106035 UC5 NETWORK 12 PIN PLUG (A-KEY) 1
P03 106162 UC5 NETWORK 6 PIN PLUG 2
V01 44963D VALVE BLOCK ASSEMBLY 2 STATION CC/LS PROP DT 4 BOLT 1
* For systems purchased BEFORE October 1, 2011, the roll sensor part number is 43740.
6
3.4 Hydraulic Fitting Kit Details (P/N: 44865-52)
Item Part Number Name Quantity Picture
F02 103312 MALE ADAPTER - 6MB 6MJ 2
F03 104369 PLUG - 6MBP 2
F04 44928 ONE WAY ORIFICE INSERT - 0.047 2
F05 105588 TEE - 4FJXR 4MJT 2
F06 103719 MALE ADAPTER - 6MB 4MJ 2
F07 44926 ORIFICE INSERT 3/64 2
6 M B - 6 M OR X 90
SIZE IN
1/16TH'S
GENDER: MALE
OR FEMALE
90° ANGLE
SWIVEL
TYPE
GENDER
SIZE
TYPE:
B - ORB
J - JIC
OR - FLAT
FACE
P - PIPE
Fitting Name
Example:
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.
7
4Pre-Install Checklist
The pre-install checklist is necessary to check the existing sprayer functionality before the
installation.
1. Unfold the sprayer over a flat, unobstructed area (i.e. no power lines…etc.).
2. Ensure all boom-fold operations are functional (place a check mark in boxes below).
3. Bring engine to field-operational RPM and record below.
4. Record the time (seconds) it takes for a full stroke for all boom functions. To ensure
repeatable measurements, take the average of 3 trials.
5. Not all sprayers will have the functions listed below in Figure 4.
Ensure the boom has sufficient travel so it does not contact the ground during
these tests.
Figure 4: Pre-Install Boom Speeds
Autres manuels pour UC5 Topcon X30
55
Table des matières
Autres manuels Norac Contrôleurs
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4+ Roll Control Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4.5 Manuel utilisateur
Norac
Norac UC4 Total Control Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac Gregson Maverick 120 Series Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac UC4+ Mode d’emploi
Norac
Norac UC4+ Manuel utilisateur
Norac
Norac NITRO Manuel utilisateur
Norac
Norac UC5 Topcon X30 Manuel utilisateur
Norac
Norac UC4+ 1200/1600 Manuel utilisateur
