Tips: The auto-reconnection function will just effect in 15
seconds after the connection lost. If a new Bluetooth stereo
headset/ audio receiver is available (in pairing mode), TX will
try to pair with it and continuous the audio/music transfer with
the new paired Bluetooth stereo headset/ audio receiver.
Otherwise TX will goes into idle mode to save power, the blue
LED will flash in slow speed.
USING TX with WIRELESS TALKING
When you have successfully connected TX and Bluetooth
stereo headset/ audio receiver, press the talk button on your
Bluetooth stereo headset/ audio receiver, TX will receive the
MIC voice from Bluetooth stereo headset/ audio receiver. So
you get a 2 ways audio/voice communication at the same
time and enjoy the wireless talking freely. After finishing voice
talking, you can press talk button on stereo headset/audio
receiver to finish talking function.
Tips: To use wireless talking, your Bluetooth stereo headset/
audio receiver should have a microphone and support the
phone call function. And to make the wireless talking, you
need to use the “voice dial function” on your Bluetooth stereo
headset/ audio receiver, please refer the user guide of your
Bluetooth stereo headset/ audio receiver
SPECIAL USB AUDIO DONGLE MODE
Tx support a special USB audio dongle mode, it
connects through USB cable with PC and works as an
USB audio device, transmits the audio from PC directly,
the audio jack is not needed to use, if your stereo
headset/ receiver support the remote control function,
Tx can receive these commands and send to PC, to
control your PC music player software or SKYPE.
To set the TX into USB audio dongle mode
To enable the special USB audio dongle mode, you need to
do same operations step by step.
1. Put the power switch to OFF position.
2. Then connect the USB cable from PC to TX’s USB
connector, the amber LED will turn on to indicate
charging.
3. Put the power switch to ON position, after a while, the
amber LED is of and blue LED is begin to flash.
It shows the TX is on USB audio dongle mode, and you PC
will recognize an USB AUDIO DEVICE is plugging in. Then
the TX is start to search, pair and connect to you stereo
headset/ receiver automatically.
TX in USB audio dongle also supports wireless talking, and
when the SKYPE in the PC has incoming our outgoing call,
the TX will into wireless talking function automatically.
During the USB audio dongle mode, the TX has been
charged by PC via USB cable at same time.
