Nokia RH-57 Series Guide de démarrage rapide

Nokia Customer Care

2112 (RH-57) Series Transceivers

Issue 1 07/2004 Company Confidential ©2004 Nokia Corporation

Disassembly/Assembly

2112 (RH-57)

Disassembly/Assembly Nokia Customer Care

Page 2 ©2004 Nokia Corporation Company Confidential Issue 1 07/2004

Disassembly Instructions

Use the following instructions to disassemble the 2112. Use the reverse order to

assemble the phone.

1. Press the release button before removing the C-cover.

2. Remove the A-cover.

3. Always protect the window with a protection film to avoid dust and scratches.

4. Unscrew the six T6 screws using the order shown. For assembly, you must use

the reverse order and a Torx T6 PLUS with torque of 20Ncm.

Torque 20Ncm

for assembly

Nokia Customer Care Disassembly/Assembly

2112 (RH-57)

Issue 1 07/2004 ©2004 Nokia Corporation Company Confidential Page 3

5. Separate the module from the B-cover and unplug the display connector

carefully by removing the UI shield from system module.

6. Separate the UI shield from the system module carefully. The key dome is

attached with adhesive tape, which must not be touched.

7. Separate the LCD from the UI shield by pressing out the LCD using a clean cloth.

Prevent the key dome tape from getting dirty.

8. Always protect the LCD window with a protection foil to avoid dust and

scratches.

2112 (RH-57)

Disassembly/Assembly Nokia Customer Care

Page 4 ©2004 Nokia Corporation Company Confidential Issue 1 07/2004

9. Remove the earpiece. Note the guiding pin when re-assembling.

10. The shielding is attached with hooks at its backside. To remove the shielding from

the B-cover, first expand the B-cover, then push the shielding upwards.

11. Remove the power button key.

12. Use the SRT-6 to lift up the antenna.

Nokia Customer Care Disassembly/Assembly

2112 (RH-57)

Issue 1 07/2004 ©2004 Nokia Corporation Company Confidential Page 5

13. Remove the antenna.

14. Use tweezers to remove the vibra motor.

15. Use tweezers to pull up the microphone.

16. To remove the DC jack, place tweezers between the spring contacts and under

the jack. You need to use additional force to pull the jack upwards.

2112 (RH-57)

Disassembly/Assembly Nokia Customer Care

Page 6 ©2004 Nokia Corporation Company Confidential Issue 1 07/2004

17. Use a flathead screwdriver as a lever to remove the release spring.

18. Turn the B-cover as shown to allow the release button to fall out.

19. Open the SIM flap and turn it as shown in the picture.

20. Expand the B-cover carefully and remove the SIM flap.

Nokia Customer Care Disassembly/Assembly

2112 (RH-57)

Issue 1 07/2004 ©2004 Nokia Corporation Company Confidential Page 7

Exchange of Battery Connector X103

These are the two soldered support angles.

1. Use a side cutter to cut the support angles.

2. Push tweezers into the outside openings of the battery connector and lift up the

plastic cover.

3. Desolder all pins and clean the pads.

2112 (RH-57)

Disassembly/Assembly Nokia Customer Care

Page 8 ©2004 Nokia Corporation Company Confidential Issue 1 07/2004

You need a soldering iron with a higher temperature when cleaning or soldering

the ground pad.

Note the location markings to fit the connector precisely.

4. Tin one of the pads to fix the connector before soldering the following pins.

5. Place the connector between the markings and solder the first support angle. If

the position is exact, solder the other pins.

Autres manuels pour RH-57 Series

2

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels Nokia Émetteur-récepteur

Nokia

Nokia NSB-6 Series Mode d’emploi

Nokia

Nokia NSB-9 Mode d’emploi

Nokia

Nokia NPM-10 Series Mode d’emploi

Nokia

Nokia RH-21 Series Manuel utilisateur

Nokia

Nokia RH-57 Series Mode d'emploi

Nokia

Nokia NSB-1 Series Mode d’emploi

Nokia

Nokia NSW-1 Series Manuel utilisateur

Nokia

Nokia RH-27 Series Mode d’emploi

Nokia

Nokia NHM-7 series Mode d'emploi

Nokia

Nokia NSM-2 Series Instructions d'installation

Nokia

Nokia NME-2A Series Mode d’emploi

Nokia

Nokia RH-10 Series Mode d'emploi

Nokia

Nokia NSB-5 Series Instructions d'installation

Nokia

Nokia NHM-2nx Series Mode d'emploi

Nokia

Nokia NPM–9 Series Instructions d'installation

Nokia

Nokia NSE-6 SERIES Mode d’emploi

Nokia

Nokia RH-27 Series Mode d’emploi

Nokia

Nokia NKC-1X Series Instructions d'installation

Nokia

Nokia RH-21 Series Mode d’emploi

Nokia

Nokia NKC-1X Series Mode d’emploi

Nokia

Nokia RH-41 Series Mode d’emploi

Nokia

Nokia NSB-1 Series Instructions d'installation

Nokia

Nokia NSM-5 SERIES Mode d’emploi

Nokia

Nokia NPC-1 Series Mode d’emploi

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur