Nokia 32 Fiche technique

NOKIA 32

FEATURE GUIDE

CONTENTS

1. INTRODUCTION................................................................................................................1

2. FEATURE LIST..................................................................................................................1

2.1 SUPPLEMENTARY SERVICES.................................................................................1

2.1.1 HOW THE SUPPLEMENTARY SERVICES WORK...............................................2

2.1.1.1 Number identification ....................................................................................2

2.1.1.2 Call forwarding (Call offering).......................................................................2

2.1.1.3 Call waiting (Call completion).......................................................................3

2.1.1.4 In-call handling..............................................................................................3

2.1.1.5 Call restriction...............................................................................................4

2.1.1.6 Security options.............................................................................................5

2.2 SMS (SHORT MESSAGE SERVICE).........................................................................5

2.3 VOICE MAIL ................................................................................................................6

2.4 HIGH SPEED CIRCUIT SWITCHED DATA (HSCSD)...............................................6

2.5 GENERAL PACKET RADIO SERVICE (GPRS) ........................................................6

2.6 CALLING LINE IDENTIF ICATION (CLI).....................................................................6

2.7 CHARGE ADVICE INFORMATION (CAI) ..................................................................8

2.8 AUTOMATIC AREA CODE (AAC) AND ROUTING ...................................................9

2.9 FASTER CALL SETUP ...............................................................................................9

2.10 AUTOPIN SECURITY FEATURE............................................................................. 10

3. ACTIVATING AND USING CONFIGURATION MODE................................................... 10

3.1 CHANGING THE LOOP INTERRUPTION TIME ..................................................... 10

3.2 CHANGING THE POLARITY REVERSAL TIME ..................................................... 11

3.3 CHANGING CALLING LINE IDENTIFICATION (CLI) MODE.................................. 11

3.4 SELECTING NETWORK........................................................................................... 12

3.5 CHANGING APPLICATION MODULE EXTENSION MODES.................................12

3.6 SELECTING CALL MONITOR METHOD IN EXTENSION MODE.......................... 13

Legal Notice

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the

prior written permission of Nokia is prohibited.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company

names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements

to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental,

consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any

kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness

for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia

reserves the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

1. INTRODUCTION

This document goes through the main features of Nokia 32 PBX connectivity terminal. It lists

the features, describes how they are used and how settings can be changed. Additional

information is available also in the user’s guide and product specification of the Nokia 32

terminal, and Nokia 30 product documentation.

2. FEATURELIST

The features listed here are presented and described in this document:

•Supplementary services

•Short Message Service

•Voice mail

•High Speed Circuit Switched Data (HSCSD)

•General Packet RadioService (GPRS)

•Calling Line Identification (CLI)

•Charge Advice Information (CAI)

•Automatic Area Code (AAC)

•Faster Call Setup

•AutoPIN

•Extension Call End Detection

•Extension In Calling modes

•Extension Out Calling modes

2.1 SUPPLEMENTARY SERVICES

These features are network services. They are special services provided by wireless network

service providers and differ from one network and country to another. For details, check with

the local network service provider. The Nokia 32 terminal supports the GSM Phase 2/2+

Supplementary Services

•Number identification (see chapter 2.6)

•Call forwarding

•Call completion

•In -call handling

•Call transfer

•Call restriction

•High Speed Circuit Switched Data (HSCSD) (See chapter 2.4)

•General Packet Radio Service (GPRS) (See chapter 2.5)

•Security Options

2.1.1 How the supplementary services work

The activation, deactivation, request and registration of a supplementary service function in

the same way as in a mobile phone. The dialled supplementary service sequence will be

executed after 4 second’s dial time-out. The Nokia 32 terminal responds to supplementary

service activation, deactivation, request and registration by sending OK or error tones from

the telephone set’s receiver.

Table 1: OK and error tones

Tone Indication

OK ______

Error _ _ _ _

2.1.1.1 Number identification

Calling Line Identification Presentation (CLIP)

The CLIP (Calling Line Identification Presentation) feature displays the caller’s number on an

external CLI (Calling Line Identity) device. The CLI device must be connected between the

Nokia 32 terminal and the DTMF telephone. In order to connect the CLI, signalling mode

must be activated.

Note that the CLIP function usually has to be activated by the network operator.

To request this function, key in *#30#.

Calling Line Identification Restriction (CLIR)

The CLIR (Calling Line Identification Restriction) feature offers the user an opportunity to

prevent his/her number from being shown to the recipient of the call. The network operator

sets the CLIR either to ON or OFF state for the subscriber. It is also possible to revert to the

CLIR status for one call at a time.

If, for example the CLIR is disabled (the phone number will be shown to the recipient of the

call), invoke the CLIR by keying in#31#PhoneNumber. The phone makes a normal call to

the PhoneNumber but therecipient of the call will not be able to see the Nokia 32 terminal’s

phone number.

If the CLIR has been set permanently to ON (the phone number is not shown to therecipient

of the call), key in *#31# to show the number.

2.1.1.2 Call forwarding (Call offering)

These functions allow the user to forward incoming calls.

Table 2:Call forwarding functions

Function Request Activation Deactivation

Call forwarding;

Unconditional (CFU) *#21#*21*PhoneNumber# ##21#

Call forwarding;

Busy (CFB) *#67# *67*PhoneNumber# ##67#

Call Forwarding;

No reply (CFNRy)

*#61# *61*PhoneNumber# ##61#

Call Forwarding;

Not reachable (CFNRc)

*#62# *62*PhoneNumber# ##62#

•Unconditional call forwarding, also called call offering, allows incoming calls to be

directed to another number (network service).

•Busy call forwarding allows the subscriber to direct incoming calls to another number

when the telephone set is busy. Usually, the CFB service has to be first activated by

calling the operator’s service number (network service).

•No reply call forwarding enables the subscriber to direct incoming calls to another

number when the calls are not answered. Usually the CFNRy service has to be

activated first by calling the operator’s service number (network service).

•Not reachable call forwarding allows the subscriber to direct incoming calls to

another number when the network is not in service or the terminal is powered off.

Usually the CFNRy service has to be first activated by calling to the operator service

number (network service).

2.1.1.3 Call waiting (Call completion)

Call waiting, also called call completion, alerts the subscriber of another incoming call during

a phone call (network service).

To request call waiting, key in *#43#.

To activate call waiting, key in *43#.

To deactivate call waiting, key in #43#.

2.1.1.4 In-call handling

These functions allow the user to switch between phone calls. The service is controlled by

the R (register recall) button.

Table 3:In-call handling functions

Function Action

Call in progress, release call waiting 0R

Answer call waiting, release active call 1R

Answer call waiting, hold active call 2R

Switch between active and held call R

Release active call 1R

Release held call 0R

Release all calls but waiting call On-hook

Hold active call and set up new call R number

To transfer a call to a different number:

1 Hold the active call by pressing R (register recall).

2 Dial the new number to which the call is to be transferred.

3 Press 4 and the R (register recall) button.

2.1.1.5 Call restriction

To activate or deactivate the barring of supplementary services, the user needs the network

passwordfrom thenetwork operator.

Table 4: Call restriction functions

Function Request Activation Deactivation

Barring of all

outgoing calls *#33# *33*NetworkPassword# #33*NetworkPassword#

Barring of all

international calls *#331# *331*NetworkPassword# #331*NetworkPassword#

Barring of all

incoming calls *#35# *35*NetworkPassword# #35*NetworkPassword#

Note:Restricting calls in some networks may restrict the ability to make

emergency calls. If this is the case in your network, ALL USERS OF THE

TERMINAL MUST BE INFORMED by appropriate warning signs on ALL phones

connected to the terminal.

The effect of call restriction varies among networks so each operator must provide

its own warning signs that accurately describe any emergency restrictions.

2.1.1.6 Security options

These functions provide the user with security options.

Table 5:Functions of security options

Security function Action

Change PIN **04*Old_PIN*New_PIN*New_PIN#

Change PIN2 **042*Old_PIN2*New_PIN2*New_PIN2#

Change PIN2 when

PIN2 is not known

**052*PUK2*New_PIN2*New_PIN2#

To unblock PIN Enter PUK code and press #. Enter a new PIN code and press

#. Verify the new PIN code and press #.

To change registration

password1*03*PCC*Old_NetworkPassword*New_NetworkPassword*

New_NetworkPassword#

To change all barring

service password1*03*330*PCC*Old_NetworkPassword*New_NetworkPassword*

New_NetworkPasswd#

To change outgoing

barring service

password1

*03*333*PCC*Old_NetworkPassword*New_NetworkPassword*

New_NetworkPassword#

To change incoming

barring service

password1

*03*353*PCC*Old_NetworkPassword*New_NetworkPassword*

New_NetworkPassword#

The Password Control Code (PCC) is needed to change the password. The PCC code can

be requested from the network operator.

2.2 SMS (SHORT MESSAGE SERVICE)

The Nokia 32 terminal supports both Mobile Originated (MO) and Mobile Terminated (MT)

short message services with the help of AT commands. A PC and a data cable are needed

when using the SMS feature.

Further description for using SMS (and other data services) can be found in the Nokia 30

product documentation, which is available at www.nokia.com.

When an SMS message is received, it is indicated to the customer with light and tone

indicators.

When SMS is received, led number three (3) is blinking green/red.

Figure 1: Nokia 32 terminal led numbering

When SMS is received, following tone can be heard from the telephone receiver:

SMS received tone _ _ _ _ _ _ _ _ _ _ _ _

2.3 VOICE MAIL

The Nokia 32 terminal supports the GSM network voice mail service. If the network sends an

SMS of received voice mail, the terminal will indicate the received SMS with light indicators

and also by means of tone in the telephone set’s receiver.

2.4 HIGH SPEED CIRCUIT SWITCHED DATA (HSCSD)

The GSM terminal supports High Speed Circuit Switched Data that enables a data

transmission speed of up to 43.2 kbps. The High Speed Circuit Switched Data (HSCSD)

relies on the simultaneous use of multiple GSM timeslots. The HSCSD is a network service.

More information and instructions about HSCSD canbe found in the Nokia 30 product

documentation, which is available at www.nokia.com.

2.5 GENERAL PACKET RADIO SERVICE (GPRS)

GPRS utilises packet switched technology where information is transmitted in small bursts of

data. The GPRS mobile station class of the No kia 32 terminal is class B. This means that

both GPRS connections and circuit switched connections are possible, although it has to be

defined which one is used each time. The Nokia 32 supports GPRS multi-slot class 6, thus

multiple timeslots can be used for data transfer at the same time: 3+1, 2+2 or 2+1 slots.

More information and instructions about GPRS canbe found in the Nokia 30 product

documentation, which is available at www.nokia.com.

2.6 CALLING LINE IDENTIFICATION (CLI)

The Calling Line Identification (CLI) feature displays the caller’s number with an external

calling line display device. Two signalling methods are available, ETSI FSK (European

Telecommunications Standards Institute Frequency Shift Keying) and DTMF (Dual Tone

Multi Frequency). The signalling mode varies depending on the operator and the country.

The default mode is ETSI FSK.

Note:Nokia does not provide The CLI devices. For details and availability, contact

your service provider.

The CLI mode used can be changed either with Nokia 32 Configurator software or with a

landline telephone.

To change the CLI mode with Configurator software, select ‘Nokia 32’ menu in the

Configurator and then ‘Line Adapter Settings’ (see figure 2 below).

Figure 2: Changing CLI mode

For instructions how to change the CLI mode with a telephone set, see section Activating

and using configuration mode.

Autres manuels pour 32

Table des matières

Autres manuels Nokia Terminal tactile

Nokia

Nokia DNT2Mi-fp Manuel utilisateur

Nokia

Nokia 32 Manuel utilisateur

Nokia

Nokia 30 GSM Manuel utilisateur

Nokia

Nokia G-010G-T Manuel utilisateur

Nokia

Nokia XS-010X-Q Manuel utilisateur

Nokia

Nokia 30 GSM Instructions d'installation

Nokia

Nokia SERIES 30 Manuel utilisateur

Nokia

Nokia Mobile Phone Manuel utilisateur

Nokia

Nokia 7368 ISAM ONT G-240W-C Manuel utilisateur

Nokia

Nokia Cardphone 2.0 Manuel utilisateur

Nokia

Nokia G-010G-A Manuel utilisateur

Nokia

Nokia DNT2Mi sp/mp Manuel utilisateur

Nokia

Nokia G-0425G-A Manuel utilisateur

Nokia

Nokia XS-2426G-A Manuel utilisateur

Nokia

Nokia ONT G-010S-A Manuel utilisateur

Nokia

Nokia 7368 Manuel utilisateur

Nokia

Nokia 7368 Manuel utilisateur

Nokia

Nokia 22 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur