Netvox R313M Manuel utilisateur

Model：R313M

Wireless Door Bell Button

User Manual

This document contains proprietary technical information which is the property of

NETVOX Technology. It shall be maintained in strict confidence and shall not be

disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction.................................................................................................................2

2.Appearance..................................................................................................................2

3. Main Features .............................................................................................................3

4. Set up Instruction........................................................................................................4

5. Data Report.................................................................................................................6

6. Installation ................................................................................................................11

7. Important Maintenance Instruction ..........................................................................12

1. Introduction

The R313M is a door bell button device for Netvox ClassAtype devices based on the LoRaWAN

open protocol and is compatible with the LoRaWAN protocol.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power

consumption. Compared with other communication methods, LoRa spread spectrum modulation

method greatly increases to expand the communication distance. Widely used in long-distance,

low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low

power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure

interoperability between devices and gateways from different manufacturers.

2. Appearance

Indicator

Door Bell Button

Function Key

3. Main Features

Compatible with LoRaWAN

2 sections of 3V CR2450 button battery power supply

Door bell status detection

Simple operation and setting

Protection class IP30

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum

Configuration parameters can be configured via a third-party software platform, data can be read

and alerts can be set via SMS text and email (optional)

Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne

Improved power management for longer battery life

Battery Life

⁻Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html

⁻At this website, users can find battery life time for various models at different

configurations.

1. Actual range may vary depending on environment.

2. Battery life is determined by sensor reporting frequency and other variables.

4. Set up Instruction

On/Off

Power on

Insert batteries (users may need a screwdriver to open)

Insert two sections of 3V CR2450 button batteries and close the battery cover.

Note: Require 2 button batteries to supply power at the same time.

Turn on Press any function key and indicator flashes once meaning it is turned on

successfully.

Turn off

(Restore to factory setting)

Press and hold the function key for 5 seconds and green indicator flashes 20

times.

Power off Remove Batteries.

Note:

1. Remove and insert the battery; the device memorizes previous on/off

state by default.

2. On/off interval is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage

components.

3. If press any function key and insert batteries at the same time, it will

enter engineer testing mode.

Network Joining

Never joined the network

Turn on the device to search the network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Had joined the network

(not restore to the factory

setting)

Turn on the device to search the previous network.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Fail to join the network Suggest to check the device verification information on the gateway

or consult

your platform server provider.

Function Key

Press and hold for 5 seconds

Restore to factory setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once The device is in the network: green indicator flashes once and sends a report

The device is not in the network: green indicator remains off

Press doorbell button Trigger the doorbell alarm

Note: Users can configure the button pressing time to send alarm by command

Sleeping Mode

The device is on and in the

network

Sleeping period: Min Interval.

When the reportchange exceeds setting value or the state changes: send a data

report according to Min Interval.

Low Voltage Warning

ow Voltage

2.4V

5. Data Report

Data report configuration and sending period are as following:

Min Interval

(Unit:second)

Max Interval

(Unit:second) Reportable Change Current Change≥

Reportable Change

Current Change＜

Reportable Change

Any number between

1~65535

Any number between

1~65535 Can not be 0. Report

per Min Interval

Report

per Max Interval

The device will immediately send a version packet report along with an uplink packet including door bell

alarm.

The device sends data in the default configuration before any configuration is done.

Default setting

Maximum time: 3600s

Minimum time: 3600s

Battery change: 0x01 (0.1v)

Door bell button trigger:

Press the door bell button and immediately send a report.

R313M was pressed, Alarm=1

R313M was not pressed, Alarm=0

Note:

MinInterval is the sampling period for the Sensor. Sampling period >= MinInterval.

Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command

Resolver http://loraresolver.netvoxcloud.com:8888/page/index to resolve uplink data.

Example of ConfigureCmd

FPort：0x07

Bytes 1 1 Var (Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 byte

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

(1) Command Configuration:

MinTime = 1min、MaxTime = 1min、BatteryChange = 0.1v

Downlink：0155003C003C0100000000 003C(Hex) = 60(Dec)

Response：

8155000000000000000000（Configuration success）

8155010000000000000000（Configuration failure）

(2) Read Configuration:

Downlink：0255000000000000000000

Response：

8255003C003C0100000000（Current configuration）

Description Device Cmd

ID Device

Type NetvoxPayLoadData

Config

ReportReq

R313M

0x01

0x55

MinTime

(2bytes Unit:s) MaxTime

(2bytes Unit:s)

Battery

Change

(1byte Unit:0.1v)

Reserved

(4Bytes,Fixed

0x00)

Config

ReportRsp 0x81 Status

(0x00_success) Reserved

(8Bytes,Fixed 0x00)

ReadConfig

ReportReq 0x02 Reserved

(9Bytes,Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit:s) MaxTime

(2bytes Unit:s)

Battery

Change

(1byte Unit:0.1v)

Reserved

(4Bytes,Fixed

0x00)

Example of Config Button Press Time

FPort：0x0D

Default Press Time：0x00

(1) Command Configuration:

Trigger door bell after press button 2 seconds

Downlink：0102 *Please notice port number is 0x0D (13) when downlink command

Response：

8100 (Configuration success)

8101 (Configuration failure)

(2) Read Configuration:

Downlink：02

Response：8202 (Current configuration)

Description CmdID PayLoad(Fix byte,1byte)

SetButtonPressTimeReq 0x01

PressTime

(1bytes)

0x00_QuickPush_Less then 1 Second,

0x01_1 Second push,

0x02_2 Seconds push,

0x03_3 Seconds push,

0x04_4 Seconds push,

0x05_5 Seconds push,

Other value is reserved

SetButtonPressTimeRsp 0x81 Status

(0x00_Success 0x01_Failure)

GetButtonPressTimeReq 0x02

GetButtonPressTimeRsp 0x82

PressTime (1bytes)

0x00_QuickPush_Less then 1 Second,

0x01_1 Second push,

0x02_2 Seconds push,

0x03_3 Seconds push,

0x04_4 Seconds push,

0x05_5 Seconds push,

Other value is reserved

Example for MinTime/MaxTime logic

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change

i.e.BatteryVoltageChange=0.1V

MaxTime MaxTime

Sleeping(MinTime) Sleeping(MinTime)

Note:

MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration

regardless BtteryVoltageChange value.

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change

i.e. BatteryVoltageChange= 0.1V.

MaxTime

Sleeping(MinTime) sleeping sleeping sleeping

0H 15th M 30th M 45th M 1H

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wake up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Table des matières

Autres manuels netvox Accessoires

netvox

netvox R718LB Manuel utilisateur

netvox

netvox R718CK2 Manuel utilisateur

netvox

netvox R718VA Manuel utilisateur

netvox

netvox R313FA1 Manuel utilisateur

netvox

netvox R718PB15 Manuel utilisateur

netvox

netvox RA02C Manuel utilisateur

netvox

netvox R727 Manuel utilisateur

netvox

netvox R311B Manuel utilisateur

netvox

netvox Z311C Manuel utilisateur

netvox

netvox R72632A01 Manuel utilisateur

netvox

netvox Z713 Manuel utilisateur

netvox

netvox R816B Manuel utilisateur

netvox

netvox R718UBD Series Manuel utilisateur

netvox

netvox R718AD Manuel utilisateur

netvox

netvox R311FA1 Manuel utilisateur

netvox

netvox R315 Series Manuel utilisateur

netvox

netvox R718PQA Manuel utilisateur

netvox

netvox R311G Manuel utilisateur

netvox

netvox R718LB Manuel utilisateur

netvox

netvox R718E Manuel utilisateur

netvox

netvox R718PG-AS923 Manuel utilisateur

netvox

netvox R313CA Manuel utilisateur

netvox

netvox R313B Manuel utilisateur

netvox

netvox R313G Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

netvox R313M Manuel utilisateur

Manuels Accessoires populaires d'autres marques