NetUP Streamer Manuel utilisateur

NetUP Streamer.

User’s manual

2



Contents

1Introduction

Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Notation conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About NetUP Streamer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Numbering of NetUP Streamer inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

All-in-one solution from NetUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2LCD panel

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Statistics screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Set IP address and subnet mask. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Generate new administrator’s password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3Web interface

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

How to get started? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Streaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

IPTV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

System administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

System configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

System status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4System maintenance

Backup copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Editing IP table rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Network troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

NetUP server troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

NetUP server factory reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3

Introduction

Intended audience

This manual is intended for IPTV service providers using NetUP solutions. An overall knowledge of TV broadcasting

systems and IP networking is assumed. The document covers basic functionality of device, recommendations for its

configuration and operation.

Notation conventions

About NetUP Streamer

NetUP Streamer allows to receive and relay streams from the following sources:

–satellites;

–terrestrial antennas;

–cable networks;

–IP providers;

–streams of Internet broadcasting;

–IP cameras;

–storage.

Headend stations NetUP Streamer are presented in three models:

– NetUP Streamer mini – the compact headend station allows to receive streams from 4 satellite transponders and

relay 50 or more channels;

– NetUP Streamer 8x – the station for TV providers which allows to receive streams from 8 satellite transponders and

relay 100 or more channels with the total speed of over 900Mbps;

– NetUP Streamer 16x – the station for TV providers which has redundant power supply and hot-swap storage and

allows to receive streams from 16 satellite transponders and relay 200 or more channels.

Additional features requires a separate license. To purchase the license, please contact the NetUP managers.

Code blocks;

Notes

Warnings related to incomplete compatibility with older versions of NetUP.tv NetUP.tv

Generic warnings

NetUP Streamer may be supplied with additional features: transcoding and content encryption before

broadcasting and create a mosaic channel

4

Numbering of NetUP Streamer inputs 

Numbering of NetUP Streamer inputs

Inputs located on the rear panel of NetUP Streamer and numbered as follows:

All-in-one solution from NetUP

NetUP Streamer may use as a stand-alone solution and as part of the NetUP IPTV Combine.

NetUP IPTV Combine is an unique all-in-one device. It includes all the tools necessary for the operator:

– Middleware – provides communication between content sources and customer’s TV set-top boxes.

– Billing – manages the customer base and commercial services.

–Streamer – receives and relays content to a local network or the Internet.

– VoD/TVoD server – stores content.

NetUP IPTV Combine, similar to NetUP IPTV Streamer, is represented by three models:

– IPTV Combine mini – a compact station for networks serving up to 50 customers, with full functionality;

– IPTV Combine 8x – an Ideal solution for networks serving up to 500 customers, for example, for hotels, cruise

liners;

– IPTV Combine 16x – a productive solution for large companies.

To know more information about NetUP IPTV Combine, please contact the NetUP managers.

Adapter

CAM

NetUP Streamer mini

Adapter

10CAM

Adapter

CAM

NetUP Streamer 8x

Adapter

10CAM

CAM

Adapter

NetUP Streamer 16x

5

LCD panel

Introduction

In order to set up the NetUP’s server equipped with LCD panel, do the following:

1. Plug the network and power cables into the device.

2. Switch power on. You shall see Startup... on the LCD panel.

3. Use the LCD manager for the initial setup of the system.

Statistics screen

Among other items, the LCD menu contains two statistics screens. The default screen displays the network adapters

traffic transfer rate. The lower line of the screen presents the total rate of input and output traffic separated by “/”.

Use Up and Down buttons to navigate through menu elements. Press Up to switch to the CPU load screen.

First number is the total CPU load. Three subsequent numbers give, correspondingly, the portions of CPU load related

to user tasks (u), system tasks (s), and awaiting data from the peripherals (w). Press Down to return to the traffic

statistics screen.

Press Down to navigate to the rest of menu items:

– Reboot system – restart server

– Shutdown system – shutdown server

– Generate (Reset) password – generate a new admin password

Set IP address and subnet mask

1. Select the Network setup screen and press Enter to go to settings menu.

2. Press Up and Down to select the network interface and press Enter.

3. If you need to edit IP address press Enter and then press Up or Down to select an octet for editing. The selected

octet will be indicated by a symbol " > ".

4. Select the last octet of the IP address and press Enter to go to edit the subnet mask.. Press Up or Down to

increase or decrease the number of mask bits. Press Enter to go to the save settings dialog.

5. Select Save changes to save the IP address and the mask and select Discard to cancel settings. Buttons Up and

Down switch between options, with currently selected option emphasized with brackets. Press Enter to confirm

the selection.

6. When the settings are done, set up your DNS server (via its config file) to associate the IPaddress just entered with

mw.iptv domain name.

LCD manager provides a convenient way to monitor the CPU and LAN interface load on the device front panel,

as well as to assign IP addresses to network adapters.

Generate password allows to reset the administrator’s password. The new administrator’s password is

displayed on the LCD until a key is pressed on the front panel

< IPTV [I/0]^ >

12.0 / 0.55 Mbps

< IPTV [CPU]v >

20% 0u 20s 0w

Select interface

Interface 1

IP address:

> 10. 2. 0. 12

Enter

6

Generate new administrator’s password 

Generate new administrator’s password

1. Starting from the statistic screen, press Up until you see the Reset Password.

2. Press Enter to generate new password and apply it to all system components. The password will be displayed on

the LCD screen.

7

Web interface

Overview

Web interface is used for setting up various server parameters and client's STBs.

To access the web interface, enter an IP address of Middleware server in your browser's address bar. On the opened

page enter the login and the password specified in the equipment passport.

The left panel of the web interface contains links to settings pages, pages are organized into groups. The presence of

pages and groups depends on the hardware configuration of the server and the privileges of the currently logged in

system user.

For the NetUP Streamer server administrator, the web interface includes:

How to get started?

1. Open the DVB to IP gateway page (the Streaming group) in the web interface.

It is strongly recommended to change the password immediately after logging in for the first time. For more info,

see Security on page 23

Group Page Function

Streaming DVB to IP gateway Control the NetUP Streamer, see CAM module parameters, set up

transponders and output streams

IPTV SNMP agents Set up SNMP, download the MIB file

System

administration

Files Download the Administrator’s Guide

Power Management Reboot and shutdown server

Update Update firmware

Status Get info about the services

Backup Manage backup

System

configuration

Network Manage network interfaces and VLANs

Routing Manage user routing rules

Security Change the admin password

Date and time Select timezone and set up server time

Licence Download licenses

System status About Get info about components, license and server hardware

Connections Get info about NetUP.tv systems

Storage Get info about disk space usage

8

How to get started? 

2. Click Expand input on an input panel. If the input signal is not configured or turned off, the expanded panel

displays only adapter settings. If the input signal is enabled, click Expand input settings to show the adapter

settings panel.

3. Set the input parameters in one of the following ways:

– manually – select Input mode (DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C Annex A, ISDB-T) and fill in all the

parameters. Each of Input modes has its own set of parameters, and the list of available modes depends on the

DVB adapter type. For more info, see Input modes on page 13

– get settings from satellite database or browse network – click on the Get transponder settings button on

the right and select the option: Satellite database or Browse network. In the opened window select one of the

available transponders to fill in its parameters in the form

– upload settings from preset – click Select a preset and choose one from the list. The preset settings will be

displayed in the form. If necessary, you can change parameter values.

4. Check the Enable input box.

5. Click on Apply button to active the settings. As a result, the panel displays input signal quality indicators and the

list of programs for the selected frequency.

Browse network is available for DVB-S and DVB-S2

Changing parameter values in the web form does not affect the preset. For more info, see Configure an input

using a preset on page 14

If you use a preset to set up an input, click on Apply and choose one of the actions: Apply input settings or

Apply both input and streaming settings, because the preset can store not only the parameters to configure

the input, but also the parameters to configure output streams.



If the preset stores only the parameters to configure the input, the panel displays the Load button

9

Streaming 

Streaming

DVB to IP gateway

This page displays all available inputs. Each input has its own panel. 

If an Input is enabled, the panel displays mode and frequency of the input stream, signal decoding information, and

CAM name. 

If an Input is not enabled, the panel displays Input is stopped.

The following actions are available on the page:

1. Tune the page interface 

Click on the Interface options button and select Settings. In the opened window, enable or disable the available

options and click Close. For more info, see Interface options on page 10

2. Get channel list 

Click on the Interface options button and select Get channel list. In the opened window, select a format: XML or

M3U, and click Download or Copy.

3. Get EPG 

Click on the Interface options button and select Get EPG. In the opened window, select a format: JSON or

XMLTV,and click Download or Copy link to EPG.

4. Expand the panel with input settings 

Left-click on the corresponding button on the input panel you want to configure. For more info, see Input panel on

page 10

Inputs in the web interface are numbered as inputs on the rear panel of the NetUP Streamer (see Streamer on

page 2)

10

Streaming 

Interface options

Click the button in the upper-right corner of the DVB to IP gateway page to open the Interface options window and

enable / disable the following options:

– Edit streams for one program in a single dialog – enable the option if you want to set up all output streams for

one program in a single common window. For more info, see Set up streaming on page 18.

– Display no more than two destinations for each service in the services list – enable the option if you want

to display no more than two destinations for each service in the common list of services in the input panel.

– Show failed to unscramble warnings – disable the option if you want to hide warnings about decoding errors

on the NetUP DVB to IP gatewaypage.

– Use MSym/s as symbol rate units – enable the option if you want to switch symbol rate units. Default symbolic

speed is in KSym/s.

– Enable interface tutorial – enable the option if you want to run a short tutorial on NetUP DVB to IP gateway.

– Interface language – select English or Russian for the interface.

Input panel

Click Expand input on an input panel to access its settings.

If you have already configured the signal for the selected input, the expanded input panel displays:

–Signal quality indicators

Table des matières

Autres manuels NetUP Lecteur multimédia

NetUP

NetUP Streamer HDMI 1x Manuel utilisateur

NetUP

NetUP HDMI 8x v3 Manuel utilisateur

NetUP

NetUP Streamer HDMI 8x Manuel utilisateur

NetUP

NetUP Streamer HDMI 1x v2 Manuel utilisateur

NetUP

NetUP Streamer 16xC Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques

Visual Land

Visual Land Impulse Manuel utilisateur

limHD

limHD 200i Manuel utilisateur

Transcend

Transcend DMP10 Manuel utilisateur

Philips

Philips GoGear Muse SA2MUS08 Manuel utilisateur

Fantec

Fantec MM-HDRL Manuel utilisateur

Dune HD

Dune HD Duo 4K Manuel utilisateur

IAdea

IAdea HMP-505S Manuel utilisateur

Camos

Camos MMS-1000 Manuel utilisateur

Energy

Energy 75 Series Manuel utilisateur

Z3 Technology

Z3 Technology DME-03 Manuel utilisateur

Sony

Sony SVR-2000 Guide de l'utilisateur

Meicheng

Meicheng HD-1080K12 Manuel utilisateur

DENAFRIPS

DENAFRIPS ARCE Manuel utilisateur

Topaz

Topaz CMS Media Player Instructions d'utilisation

InFocus

InFocus LightCast Manuel utilisateur

IconBiT

IconBiT XDS1003D Manuel utilisateur

Quanmax

Quanmax QDSP-2090 Series Manuel utilisateur

Samsung

Samsung MP-80S Manuel utilisateur