NetUP Streamer HDMI 8x Manuel utilisateur

1/7, Ulofa Palme str., Moscow, Russia

+7 (495)510-1025 |info@netup.tv |http://netup.tv

NetUP Streamer HDMI 8x

User manual

9 April 2019

NetUP Streamer HDMI 8x. User manual

Contents

Introduction ............................................................................ 3

Appearance and illustration................................................................................................... 3

Specifications ......................................................................................................................... 5

Installation guide..................................................................... 6

Device’s installation flow chart.............................................................................................. 6

Packing list check ................................................................................................................... 6

Safety instructions ................................................................................................................. 6

Environment requirement ..................................................................................................... 7

Grounding requirement ......................................................................................................... 7

LCD screen feature description ................................................ 8

Initializing and general settings ............................................................................................. 8

1 System Param...................................................................................................................... 9

2 Modulator ......................................................................................................................... 10

3 Output Settings ................................................................................................................. 11

4 MUX Setting ...................................................................................................................... 11

5 Network Setting ................................................................................................................ 12

6 Configuration Setting ........................................................................................................ 13

7 Version .............................................................................................................................. 13

WEB NMS Operation ..............................................................14

Login ..................................................................................................................................... 14

Status.................................................................................................................................... 15

Encoder ................................................................................................................................ 16

MUX...................................................................................................................................... 17

Modulator ............................................................................................................................ 19

Output.................................................................................................................................. 19

TS Config............................................................................................................................... 22

System .................................................................................................................................. 23

Network................................................................................................................................ 24

Password .............................................................................................................................. 24

Troubleshooting.........................................................................................25

NetUP Streamer HDMI 8x. User manual

Introduction

NetUP Streamer HDMI 8x is an all-in-one device, that integrates encoding, (MPEG-4/AVC H.264)

multiplexing and modulation functions in a 1U case. It is capable of converting 8 HDMI signals and 1

ASI input to 2 DVB-T RF outputs in the frequency range of 30~999MHz. It is also equipped with 2 ASI

ports and an IP port. The source signal may come from a satellite receiver, closed-circuit television

camera, etc. The device’s output can be received by DVB-T standard TVs or DVB-T STBs.

This device can be used for advertising or monitoring purposes in public places such as metro, market

halls, theatres, hotels, resorts, etc.

Appearance and illustration

Front panel:

1 LCD screen

2 Indicators

Power

TS in – the input lock indicator

CH1-CH8 coding channels

All indicators will light on when the device is switched on

3 UP/DOWN, LEFT/RIGHT keys

4 ENTER key

MENU key

LOCK key

NetUP Streamer HDMI 8x. User manual

Rear panel:

HDMI ports

RF test port

RF output port

ASI input port

ASI output ports

DATA port (for IP signal output)

NMS (Network management port)

Power switch

Fuse

Power socket

Grounding pole

NetUP Streamer HDMI 8x. User manual

Specifications

Input 8×HDMI and 1×ASI

Video

Encoding

MPEG-4 AVC/H.264

Resolution

1920×1080_60p,1920×1080_50p

1920×1080_60i, 1920×1080_50i

1280×720_60p, 1280×720 _50p

720×576_50i, 720×480_60i

Bitrate

0.8Mbps~19Mbps (each channel)

Rate control

VBR/CBR

GOP Structure

IBBP

Advanced Pretreatment

Deinterlacing, Noise reduction, Sharpening

Audio

Encoding

MPEG-1 Layer 2, HE-AAC V2, LC- AAC

Sample rate 48KHz

Bitrate

64Kbps~384Kbps (each channel)

Multiplexing

1 ASI input multiplexed with local 8 channels of TS

PID remapping (automatically or manually)

Accurate PCR adjusting

Generate PSI/SI table automatically

Modulator

Standard

EN300744

FFT mode

2K, 8K

Bandwidth

6MHz, 7MHz, 8MHz

Constellation

QPSK, 16QAM, 64QAM

Guard Interval

1/4, 1/8, 1/16, 1/32

FEC

1/2, 2/3, 3/4, 5/6, 7/8

MER

≥42dB

RF frequency

30~960MHz, 1KHz step

RF output level

-30~ -10dbm (77~97 dbµV), 0.1db step

RF out

2×RF DVB-T out

Output

2×ASI to mirror one RF output, BNC interface

8×SPTS over UDP, RTP/RTSP, 1000Base-T Ethernet interface (unicast / multicast)

System

Control

LCD/keyboard controls, web NMS support

Update

Ethernet software & hardware upgrade

Other

parameters

Dimension (W×L×H)

482mm×328mm×44mm

Approx. weight

4kg

Temperature

0~45℃ (work); -20~80℃ (storage)

Power requirements

AC 100V-220V±10%, 50/60Hz

Power consumption

25W

NetUP Streamer HDMI 8x. User manual

Installation guide

Device’s installation flow chart

Before installing and connecting the device, carefully read the environment and

grounding requirements, as well as safety instructions for the sake of your safety and for

the safety of the device

Packing list check

Check items according to packing list. Normally it should include the following items:

•NetUP Streamer HDMI 8x

•Power Cord

•HDMI cable

•ASI cable

Safety instructions

•Before installing and connecting the device make sure that the device was not damaged during

delivery.

•Install the device in an appropriate place. The device is designed to work in a clean and dry room.

It must be operated and maintained free of dust.

•Before switching on the device make sure that it is adjusted to the mains voltage you intend to

use. Make sure that you keep within the specifications – AC 100V-220V±10%, 50/60Hz.

•Check that all the cables are connected properly. Connect cables only to a device that is turned

off.

Packing list

check

Connecting

grounding

wire and

power cord

Installing

device

Connecting

signal cable

Setting

parameter

Running

device

NetUP Streamer HDMI 8x. User manual

Environment requirement

Item

Requirement

Room space

When installing a rack in the room, make sure the distance between two

rows of racks is 1.2~1.5m and the distance to the wall is at least 0.8m.

Room floor

Electric isolation. Dust free. The volume resistivity of ground anti-static

material: 1×107~1×1010 Ω. Grounding current limiting resistance: 1M (Floor

bearing should be greater than 450Kg/m2).

Environment

temperature

5~40℃ (sustainable), 0~45℃ (short time).

Installing air-conditioning is recommended.

Relative temperature

20%~80% (sustainable); 10%~90% (short time).

Pressure

86~105KPa

Door & window

Install rubber strip for sealing door-gaps and dual level glasses for windows.

Walls

Can be covered with wallpaper or dark paint.

Fire protection

Fire alarm system and extinguisher.

Power

The device requires AC 100V-220V±10%, 50/60Hz.

Please carefully check before running.

Grounding requirement

•Connect the ground wire to the grounding hardware on the device. Ground resistance should be

no more than 1 Ω

Grounding is essential for device’s functionality, surge and electronic interference

protection

•Keep proper contact with the metal housing of the device

•Grounding wire must be made out of copper and as thick and short as possible

•Make sure the two ends of grounding wire conduct electricity and are not rusty

•It is prohibited to use any other devices as a part of grounding electric circuit

•All racks should be connected with a protective copper strip. Ground loops should be avoided

•Grounding wire’s contact area with the rack should be no less than 25mm2

NetUP Streamer HDMI 8x. User manual

LCD screen feature description

NetUP Streamer HDMI 8x has the LCD screen and keys on its front panel. You can use them to control

and configure the device. Here is the description of keys’ functions:

Cancel unsaved changes, resets to previous settings and returns to the previous

ENTER

Select a menu item and activates a parameter for modifying, or confirms the

changes after modification

LEFT / RIGHT

UP / DOWN

Navigate through the menu and choose between the available options

LOCK

Lock or unlock the screen. After pressing the lock key, the system will ask if you

want to save the current changes. If you select “No”, the LCD will display the

current configuration state

Initializing and general settings

After powering on the device, it will take a few seconds to initialize the system, and then the LCD will

show the device’s name and multiplex bitrate or max modulating bitrate in the first row, while

channels’ respective input video resolution, frame rate and real-time encoding bitrate in the second

row in turn. It shows as below:

Encoder Modulator 12.4/32.5Mbps

1 1080I 50 11.356M 2 1080I 50 11.356M

Press LOCK to enter the main menu and set the input and output parameters. The LCD will display the

following pages:

1 System Param

2 Modulator

3 Output Setting

4 Mux Setting

5 Network Setting

6 Config Setting

7 Version

Use UP / Down to move through the list. The arrow icon (►) indicates which item has

been selected. Press ENTER to get to the submenu

NetUP Streamer HDMI 8x. User manual

1 System Param

The System Param menu contains eight submenus, one for each of the eight encoding channels:

1.1 Channel 1

------------------

1.8 Channel 8

Select a channel and press ENTER to get to the submenu:

1 Video Param

2 Audio Param

3 Prg info

Select an item and press ENTER again.

1 Video Param

The Video Param menu gives you access to the following settings:

Item

Valid values

1.1 Bitrate (Mbps)

08.000

range from 0.8 to 19 Mbps

1.2 Bitrate Mode

[1] CBR

CBR – Constant Bit Rate;

VBR – Variable Bit Rate

1.3 Profile

[1] HIGH

HIGH or MAIN

1.4 Level

[1] 1.2

range from 1.2 to 10

Parameter’s current value is displayed under its name

1) Press ENTER to start editing.

2) Use UP / DOWN to select one of the possible values for the parameter. If you need to

enter a numeric value, first use LEFT / RIGHT to move the cursor to the desired

position, and then set the value using the UP / DOWN buttons.

3) Press ENTER to apply changes or press MENU to return to the parameter list.

NetUP Streamer HDMI 8x. User manual

2 Audio Param

The Audio Param menu gives you access to the following settings:

Item

Valid values

2.1 Audio Bitrate

[1] 64 Kbps

range from 64 to 384 Kbps

2.2 Audio Format

[1] MPEG1-Layer II

MPEG1 Layer II, LC-AAC and HE-AAC

3 Prg info

The Prg info menu gives you access to the following settings:

Item

Valid values

3.1 Program Number

0x0101

integer

2 Modulator

The Modulator menu gives you access to the following settings:

Item

Valid values

Bandwidth

[1] 6M

6М, 7М and 8М

Constellation

[1] QPSK

QPSK, 16QAM or 64QAM

FFT

[1] 2К

2К or 8К

Guard Interval

[1] 1/4

1/4, 1/8, 1/16, 1/32

Code rate

[1] 1/2

1/2, 2/3, 3/4, 5/6, 7/8

RF Frequency 1/2

750.00MHz

range from 30 to 90 MHz with 1K step

RF level

-10.0 dbm

range from -30 to -10 dbm (77~97dbµV) with 0.1db step

RF On 1/2

►Off

Off or On

Table des matières

Autres manuels NetUP Lecteur multimédia

NetUP

NetUP Streamer 16xC Manuel utilisateur

NetUP

NetUP HDMI 8x v3 Manuel utilisateur

NetUP

NetUP Streamer HDMI 1x v2 Manuel utilisateur

NetUP

NetUP Streamer HDMI 1x Manuel utilisateur

NetUP

NetUP Streamer Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques

Visual Land

Visual Land Impulse Manuel utilisateur

limHD

limHD 200i Manuel utilisateur

Transcend

Transcend DMP10 Manuel utilisateur

Philips

Philips GoGear Muse SA2MUS08 Manuel utilisateur

Fantec

Fantec MM-HDRL Manuel utilisateur

Dune HD

Dune HD Duo 4K Manuel utilisateur

IAdea

IAdea HMP-505S Manuel utilisateur

Camos

Camos MMS-1000 Manuel utilisateur

Energy

Energy 75 Series Manuel utilisateur

Z3 Technology

Z3 Technology DME-03 Manuel utilisateur

Sony

Sony SVR-2000 Guide de l'utilisateur

Meicheng

Meicheng HD-1080K12 Manuel utilisateur

DENAFRIPS

DENAFRIPS ARCE Manuel utilisateur

Topaz

Topaz CMS Media Player Instructions d'utilisation

InFocus

InFocus LightCast Manuel utilisateur

IconBiT

IconBiT XDS1003D Manuel utilisateur

Quanmax

Quanmax QDSP-2090 Series Manuel utilisateur

Samsung

Samsung MP-80S Manuel utilisateur