NETGEAR WGR826V Manuel utilisateur

User’s Manual for Netgear WGR826V

Netgear Inc.

4500 Great America Parkway

Santa Clara, California 95054

USA.

Phone: (408) 907-8000

Fax: (408) 907-8097

Web Site: http://www.netgear.com

2004 by Netgear, Inc., Santa Clara, California, USA

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language, in any form or by any means, electronic, mechanical,

magnetic, optical, chemical, manual or otherwise without the prior written consent of Netgear.

Netgear makes no representations or warranties with respect to the contents of this document and

specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

Further, Netgear reserves the right to revise this document and to make changes from time to time in its

content without being obligated to notify any person of such revisions or changes.

Netgear values and appreciates any comments you may have concerning our products or this document.

Please address comments to:

NETGEAR Inc.

4500 Great America Parkway

Santa Clara, California 95054

Phone: (408) 907-8000

Fax: (408) 907-8097

Web Site: http://www.netgear.com

CUSTOMER SUPPORT

1-888-638-4327 (1-888-NETGEAR)

All other products or services mentioned herein may be registered trademarks, trademarks, or service

marks of their respective manufacturers, companies, or organizations.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT

SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE

EOUIPMENT.

RF exposure: Plcase include such a statcment in the user’s The antenna(s) used for this transmitter

must be installed to provide a separation distance of at least 20 cm from all persons and must not

be co-located or operating in conjunction with any other antenna or transmitter. End-users and

installers must be provided with antenna installation and transmitter operating conditions for

satisfying RF exposure.

Contents

1Introduction.........................................................................................4

2Quick Start ..........................................................................................4

3Settings and Configuration..................................................................5

3.1 Login..............................................................................................................5

3.2 Basic Settings ................................................................................................7

3.2.1 Basic Settings.......................................................................................................... 7

3.2.2 Logs....................................................................................................................... 10

3.2.3 Block sites............................................................................................................. 12

3.2.4 Rules .....................................................................................................................14

3.2.5 Services................................................................................................................. 16

3.2.6 Schedule................................................................................................................ 18

3.2.7 E-mail....................................................................................................................20

3.2.8 Router Status......................................................................................................... 22

3.2.9 Attached Devices .................................................................................................. 25

3.2.10 Set Password ......................................................................................................... 25

3.2.11 Diagnostics............................................................................................................ 26

3.2.12 Router Upgrade & Provisioning ........................................................................... 28

3.2.13 LAN IP Setup........................................................................................................ 32

3.2.14 Static Route........................................................................................................... 35

1 Introduction

This User’s Manual describes the configuration of the Netgear WGR826V VoIP TA.

2 Quick Start

Basic setting should go through several steps.

1. Log in.

2. Basic Settings

3. Set password.

4. Set LAN IP

5. Set Rules.

6. Set Schedule.

7. Remote Management.

3 Settings and Configuration

3.1 Login

Run a browser, such as, Inetrnet Explorer, and enter in the router’s administration IP address. For

example, “http://192.168.1.1”.

Enter the user name and password (By default, user name is set to “root”. No password – leave the filed

empty).

Successful login brings up the basic settings page.

There are 4 component windows here.

1) The title windows, which display the logo, manufacture’s name, box’s name and model

2) The manual window, which shows the list of different setting and configuration pages.

3) Configuration window

4) Help windows, which give detailed explanation of the each field in the setting and configuration

windows.

The WGR826V Settings pages allow you to configure, upgrade and check the status of your

NETGEAR Router.

Click an item in the leftmost column. The current settings or information for that area appear in the

center column.

Helpful information related to the selected Settings page appears in this column. If you are using

Internet Explorer, you may click an item in the center column to jump directly to the related help

section; otherwise, scroll down until you reach it.

3.2 Basic Settings

3.2.1 Basic Settings

Note: If you are setting up the Router for the first time, the default settings may work for you with no

changes.

Does Your Internet Connection Require A Login?

Select this option based on the type of account you have with your ISP. If you need to enter login

information every time you connect to the Internet or you have a PPPoE account with your ISP,

select Yes. Otherwise, select No.

Note: If you have installed PPP software such as WinPoET (from Earthlink) or Enternet (from

PacBell), then you have PPPoE. Select Yes. After selecting Yes and configuring your Router, you

will not need to run the PPP software on your PC to connect to the Internet.

Account Name

(also known as Host Name or System Name)

For most users, type your account name or user name in this box. For example, if your main mail

account is [email protected], then put JerAB in this box.

If your ISP has given you a specific Host name, then type it (for example, CCA7324-A).

Domain Name

For most users, you may leave this box blank, unless required by your ISP. You may type the

domain name of your ISP. For example, if your ISP's mail server is mail.xxx.yyy.zzz, you would type

xxx.yyy.zzz as the Domain Name.

If you have a Domain name given to you by your ISP, type it in this box. (For example, Earthlink

Cable may require a Host name of 'home' and Comcast sometimes supplies a Domain name.)

Internet IP Address

If you log in to your service or your ISP did not provide you with a fixed IP address, the Router will

find an IP address for you automatically when you connect. Select Get Dynamically From ISP.

If you have a fixed (or static IP) address, your ISP will have provided you with the required

information. Select Use Static IP Address and type the IP Address, Subnet Mask and Gateway IP

Address into the correct boxes.

For example:

• IP Address: 24.218.156.183

• Subnet Mask: 255.255.255.0

• Gateway IP Address: 24.218.156.1

DNS Address

The DNS server is used to look up site addresses based on their names.

If your ISP gave you one or two DNS addresses, select Use These DNS Servers and type the

primary and secondary addresses.

Otherwise, select Get Automatically From ISP.

Note: If you get 'Address not found' errors when you go to a Web site, it is likely that your DNS

servers aren't set up properly. You should contact your ISP to get DNS server addresses.

NAT (Network Address Translation)

NAT allows all LAN PCs to gain Internet access via this Router, by sharing this Router's WAN IP

address. In most situations, NAT is essential for Internet access via this Router. You should only

disable NAT if you are sure you do not require it. When NAT is disabled, only standard routing is

performed by this Router.

3.2.2 Logs

Your router will log security-related events such as denied incoming service requests, hacker probes,

and administrator logins, according to your settings on this screen.

If you have set up content filtering on the Block Sites page, you can also log when someone on

your network tried to access a blocked site.

If you have E-mail notification on, you'll receive these logs in an E-mail message. If you don't have

E-mail notification set up, you can view the logs here.

To delete all log entries:

• Click Clear Log.

To see the most recent entries:

• Click Refresh.

To E-mail the log now:

• Click Send Log.

Table des matières

Autres manuels NETGEAR Routeur sans fil

NETGEAR

NETGEAR WNR2200 - N300 Wireless Router Guide de l'utilisateur

NETGEAR

NETGEAR RANGEMAX WNDR3300 Manuel utilisateur

NETGEAR

NETGEAR N150R Manuel utilisateur

NETGEAR

NETGEAR WNDR3400 - N600 Wireless Dual Band Router Guide de l'utilisateur

NETGEAR

NETGEAR D6300 Manuel utilisateur

NETGEAR

NETGEAR RangeMax DGN3500 Manuel utilisateur

NETGEAR

NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem... Manuel utilisateur

NETGEAR

NETGEAR MR70 Manuel utilisateur

NETGEAR

NETGEAR R8000 Manuel utilisateur

NETGEAR

NETGEAR DGND3700 Manuel utilisateur

NETGEAR

NETGEAR DGN1000 - Wireless-N Router With Built-in DSL... Guide de l'utilisateur

NETGEAR

NETGEAR WNR3500Lv1 Guide de l'utilisateur

NETGEAR

NETGEAR Nighthawk RAX200 Manuel utilisateur

NETGEAR

NETGEAR DGN2200v3 Manuel utilisateur

NETGEAR

NETGEAR R6080 Manuel utilisateur

NETGEAR

NETGEAR DGN2200M - Wireless-N 300 Router Manuel utilisateur

NETGEAR

NETGEAR WPN824v1 - RangeMax Wireless Router Guide de l'utilisateur

NETGEAR

NETGEAR MR814 v3 Manuel utilisateur

NETGEAR

NETGEAR R6230 Manuel utilisateur

NETGEAR

NETGEAR MINGLE Manuel utilisateur

NETGEAR

NETGEAR NIGHTHAWK R7000 Manuel utilisateur

NETGEAR

NETGEAR R6300v2 Manuel utilisateur

NETGEAR

NETGEAR SXS80 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4 R7500 Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Draytek

Draytek Vigor2120 Series Manuel utilisateur

Sitecom

Sitecom WLR-4000 Manuel utilisateur