NETGEAR DGN2200v1 Manuel utilisateur

Version 1.1

VPN Configuration of ProSafe Client and Netgear DG Router

Prerequisites:

Software: VPNGL02 or VPNGL05 (Version 5.04)

Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7.

Introduction:

This document will guide you on how to create a VPN policy for any of the home DSL gateways

that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a

Virtual Private Network to be established over the internet.

Version 1.1

Checklist:

As we configure the Netgear DSL VPN Gateway, there will be information we’ll add which will

later be used in the configuration of the ProSafe Client Software. This information will be marked

with red numbered circles. The values we will use for this guide are already filled as light grey.

You can print this form to help keep track of this information.

Pre-Shared Key: _ _______________ 12345678 _

Client Identifier: ____ _____ _____client.com _

Router Identifier: __________ _____router.com _

Client’s IP Address: ________ _ _ __192.168.100.1 _

Router’s Network Address: ______ ___192.168.0.0 _

Router’s Network Mask: _ __ _______ 255.255.255.0 _

Router’s WAN IP Address: _ _____________ _86.41.176.179 _

➊

➋

➌

➍

➎

➏

❼

Version 1.1

Configuration of the VPN Policy on the DSL Gateway:

From the Router’s GUI, go to

VPN policies under Advanced –

VPN.

Click on Add Auto Policy.

➊The pre-shared key value

goes here.

This is your Pre-Shared Key.

➋Here we select “Fully

Qualified Domain Name”and

we give the client a name

This is your Client Identifier.

➌Here we select “Fully

Qualified Domain Name”and

we give the router a name

This is your Router Identifier.

➍Here we select “Single

Address”and we specify the

IP.

This is your Client’s IP

Address.

➎- ➏Here we select “Subnet

Address”and add the address

and mask of our router.

This is your Router’s

Network Address and

Router’s Network Mask.

To accept this settings, click

on “Apply”

➋

➌

➊

➏

➎

➍

Version 1.1

Configuration of the VPN Policy on the ProSafe Client:

Before you start configuring the VPN Client, go through the Checklist at the start and make sure

you have all the information listed there.

After installing the VPN Client

Software, click on the plus sign to

open the configuration panel.

Right click on “VPN Configuration”

and add a new Phase 1. It will be

added with the name Gateway.

Version 1.1

Click on gateway.

❼The Remote Gateway field will be

the value of your Router’s WAN

IP Address.

➊Input the Pre-Shared Key that

you have used when creating the

VPN Policy on the Router and

click on the OK Button.

Next, tick the checkbox next to

Use: Secure Gateway Tunnel.

➋The Local ID Type is DNS, and the

Value for the ID is your Client

Identifier.

➌The ID Type field will be the value

of your Router Identifier.

➌

❼

➊

➋

Version 1.1

With this, the configuration is completed. Now we can try our VPN configuration and connect to

our router.

Right click on the Phase 1 and

click on New Phase 2. It will be

added with the name “Tunnel”.

Click on Tunnel.

➍Here we enter the Client’s IP

Address.

➎Here we add the Router’s

Network Address.

➏Here we add the Router’s

Network Mask.

Make sure PFS is enabled with

DH2 (1020) Group.

After you are done, click on

Save.

➍

➎

➏

Version 1.1

Connecting:

To connect the VPN Tunnel we configured, do the following:

Go to Tools and click on Connection

Panel.

Double click on the tunnel we

created.

The tray notice box should tell us we

are connected.

The Connection Panel should show a

green button indicating we are

connected.

Now we should be able to access the resources at the DSL Gateway’s network from our Client

PC.

Autres manuels pour DGN2200v1

Table des matières

Autres manuels NETGEAR Routeur sans fil

NETGEAR

NETGEAR Nighthawk R6700v3 Manuel utilisateur

NETGEAR

NETGEAR LBR20 Manuel utilisateur

NETGEAR

NETGEAR WNDR4300 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk C7100V Manuel utilisateur

NETGEAR

NETGEAR WGR826V Manuel utilisateur

NETGEAR

NETGEAR Orbi RBK40 Manuel utilisateur

NETGEAR

NETGEAR JNR3000 Manuel

NETGEAR

NETGEAR WGR614 v8 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk AX8 Series Manuel utilisateur

NETGEAR

NETGEAR N150R Manuel utilisateur

NETGEAR

NETGEAR SXS80 Manuel utilisateur

NETGEAR

NETGEAR WNDR4000 - N750 WIRELESS DUAL BAND GIGABIT... Manuel utilisateur

NETGEAR

NETGEAR WNDR3400 - N600 Wireless Dual Band Router Manuel utilisateur

NETGEAR

NETGEAR JDGN1000 Manuel utilisateur

NETGEAR

NETGEAR Super-G WGT624 Manuel utilisateur

NETGEAR

NETGEAR MR814 v3 Manuel utilisateur

NETGEAR

NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre... Manuel utilisateur

NETGEAR

NETGEAR Orbi RBR10 Manuel utilisateur

NETGEAR

NETGEAR DGN2200v1 Manuel utilisateur

NETGEAR

NETGEAR D6100 Manuel utilisateur

NETGEAR

NETGEAR WGT634U 108 Mbps Wireless Media Router WGT634U... Manuel utilisateur

NETGEAR

NETGEAR Nighthawk CAX8 Manuel utilisateur

NETGEAR

NETGEAR WPN824N - RangeMax Wireless-N 150 Router Manuel utilisateur

NETGEAR

NETGEAR WNDRMAC Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Draytek

Draytek Vigor2120 Series Manuel utilisateur

Sitecom

Sitecom WLR-4000 Manuel utilisateur