NETGEAR WG102 - ProSafe Wireless Access Point Manuel utilisateur

October 2004

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Phone 1-888-NETGEAR

Reference Manual for the

NETGEAR WG102 ProSafe

802.11g Wireless Access

Point

October 2004

Technical Support

Please register to obtain technical support. Please retain your proof of purchase and warranty

information.

To register your product, get product support or obtain product information and product

documentation, go to http://www.NETGEAR.com. If you do not have access to the World Wide

Web, you may register your product by filling out the registration card and mailing it to

NETGEAR customer service.

You will find technical support information at:

http://www.NETGEAR.com/ through the customer service area. If you want to contact technical

support by telephone, see the support information card for the correct telephone number for your

country.

Trademarks

NETGEAR is a registered trademark of NETGEAR, INC. Windows is a registered trademark of Microsoft

Corporation. Other brand and product names are trademarks or registered trademarks of their respective

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the

right to make changes to the products described in this document without notice. NETGEAR does not

assume any liability that may occur due to the use or application of the product(s) or circuit layout(s)

described herein.

Modifications made to the product, unless expressly approved by Netgear, could void the user’s authority to

operate the equipment. NETGEAR does not assume any liability that may occur due to such condition.

October 2004

FCC Statement

DECLARATION OF CONFORMITY

We Netgear,

4500 Great America Parkway

Santa Clara, CA 95054, USA

Tel: +1 408 907 8000

declare under our sole responsibility that the product(s)

WG102 (Model Designation)

802.11g ProSafe Wireless Access Point (Product Name)

complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

To assure continued compliance, any changes or modifications not expressly approved by

the party responsible for compliance could void the user's authority to operate this

equipment. (Example - use only shielded interface cables when connecting to computer or

peripheral devices).

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

October 2004

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try and correct the interference by one or more of the

following measures:

• Reorient or locate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Placement and Range Guidelines

Indoors, computers can connect over 802.11 wireless networks at a maximum range of several hundred feet

for 802.11b/g devices. However, the operating distance or range of your wireless connection can vary

significantly, based on the physical placement of the wireless access point.

For best results, identify a location for your wireless access point according to these guidelines:

• Away from potential sources of interference, such as PCs, large metal surfaces, microwaves, and 2.4 GHz cordless

phones.

• In an elevated location such as a high shelf that is near the center of the wireless coverage area for all mobile

devices.

Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly

connect to the wireless access point.

RF Exposure Warning for North America, and Australia

Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device

(see below) must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons.

Further, the antennas shall not be colocated with other antenna or radio transmitter.

October 2004

Antenna Statement for North America and Australia

In addition to its own antenna, the WG102 device has been approved for use with the following detachable

antennas and antenna cables:

* WG102 maximum radiated power in North America and Australia: 19 dBm – cable loss + antenna gain

Please go to www.netgear.com and use the search feature to find an updated list of wireless accessories

approved to be used with the WG102 in North America and Australia.

Industry Canada Compliance Statement

This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment

Regulations ICES 003.

Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur

NMB-003.

The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. The use of this

device in a system operating either partially or completely outdoors may require the user to obtain a license

Approved

Antennas Antenna Gain

and type Approved Antenna

Cable Antenna

Cable Length Maximum

Transmitted Power*

NETGEAR

ANT24D18 18dBi,directional

outdoor/indoor NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 18 dBi ant.

NETGEAR

ANT2409

9 dBi,

omnidirectional

outdoor/indoor

NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 9 dBi ant.

NETGEAR

ANT24O5 5 dBi, ceiling/wall

indoor NETGEAR

ACC-10314-01 thru 05 1.5 m to 30 m 18 dBm + 5 dBi ant.

October 2004

for the system according to the Canadian regulations. For further information, contact your local Industry

Canada office.

Europe - EU Declaration of Conformity

A printed copy of the EU Declaration of Conformity certificate for this product is provided in the WG102

product package.

This device is a 2.4/5.0 GHz dual band low power RF device intended for home and office use in EU and EFTA member

states. In some EU / EFTA member states some restrictions may apply. Please contact local spectrum management

authorities for further details before putting this device into operation.

Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the

European Union (1999/5/EC). This equipment meets the following conformance standards:

EN 300 328, EN 301 489-17, EN 60950-1 Safety of Information Technology Equipment, Including Electrical Business

Equipment EN 300 328 V1.4.1 (2003-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband

Transmission system; data transmission equipment operating in the 2.4 Ghz ISM band and using spread spectrum

modulation techniques; Part 1: Technical characteristics and test conditions; Part 2; Harmonized EN covering essential

requirements under article 3.2 of the R&TTE Directive.

EN 301 489-1, Aug. 2002; EN 301 489-17, Aug. 2002 - Electromagnetic compatibility and radio spectrum matters

(ERM); electromagnetic compatibility (EMC); standard for radio equipment and services: Part 1: Common technical

requirements; Part 17: Specific conditions for Wideband Data and Hiperlan equipment.

EN 55 022 Declaration of Conformance

This is to certify that the NETGEAR WG102 ProSafe 802.11g Wireless Access Point is shielded against the generation

of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is

declared by the application of EN 55 022 Class B (CISPR 22).

0681

October 2004

Compliance with the applicable regulations is dependent upon the use of shielded cables. It is the responsibility of the

user to procure the appropriate cables.

Requirements For Operation in the European Community

Countries of Operation & Conditions of Use in the European Community

This device is intended to be operated in all countries of the European Community. Requirements for indoor vs. outdoor

operation, license requirements and allowed channels of operation apply in some countries as described below.

Note: The user must use the web-based configuration GUI provided with this product to ensure the channels of

operation are in conformance with the spectrum usage rules for European Community countries as described

below.

• This device requires that the user or installer properly enter the current country of operation in the Wireless

Settings page as described in the user guide, before operating this device.

• This device will automatically limit the allowable channels determined by the current country of operation.

Incorrectly entering the country of operation may result in illegal operation and may cause harmful interference to

other system. The user is obligated to ensure the device is operating according to the channel limitations, indoor/

outdoor restrictions and license requirements for each European Community country as described in this document.

• This device may be operated indoors or outdoors in all countries of the European Community using the 2.4GHz

band: Channels 1 - 13, except where noted below.

•InItaly the end-user must apply for a license from the national spectrum authority to operate this device

outdoors.

•InFrance outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels 1 - 7.

October 2004

Declaration of Conformity in Languages of the European Community

English Hereby, NETGEAR Inc. declares that this Radio LAN device is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Finnish Valmistaja NETGEAR Inc. vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Dutch Hierbij verklaart NETGEAR Inc. dat het toestel Radio LAN device in overeenstemming is met de

essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG



Bij deze NETGEAR Inc. dat deze Radio LAN device voldoet aan de essentiële eisen en aan de

overige relevante bepalingen van Richtlijn 1999/5/EC.

French Par la présente NETGEAR Inc. déclare que l'appareil Radio LAN device est conforme aux

exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE

Swedish Härmed intygar NETGEAR Inc. att denna Radio LAN device står I överensstämmelse med de

väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Danish Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr Radio LAN device overholder

de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF

Hiermit erklärt NETGEAR Inc. dass sich dieser/diese/dieses Radio LAN device in

Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten

Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)

German

Hiermit erklärt NETGEAR Inc. die Übereinstimmung des Gerätes Radio LAN device mit den

grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie

1999/5/EG. (Wien)

Greek ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ NETGEAR Inc. ǻǾȁȍȃǼǿ ȅȉǿ Radio LAN device ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ

ȉǿȈ ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ

Italian Con la presente NETGEAR Inc. dichiara che questo Radio LAN device è conforme ai requisiti

essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Spanish Por medio de la presente NETGEAR Inc. declara que el Radio LAN device cumple con los

requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva

1999/5/CE

Portuguese NETGEAR Inc. declara que este Radio LAN device está conforme com os requisitos essenciais e o

disposições da Directiva 1999/5/CE.

October 2004

Antenna Statement for the European Community

Please note that the 100mW EIRP limit and regulations could vary in Europe from country to country.

Please check the regulations in your country.

The antenna cable type and length must comply with European regulations. Refer to the table below for

approved antenna and cable accessories.

In addition to its own antenna, the WG102 device has been approved for use with the following detachable

antennas and antenna cables:

* WG102 maximum radiated power in the European Community: 15 dBm – cable loss + antenna gain

Please go to www.netgear.com and use the search feature to find an updated list of wireless accessories

approved to be used with the WG102 in the European Community.

Bestätigung des Herstellers/Importeurs

Es wird hiermit bestätigt, daß das NETGEAR WG102 ProSafe 802.11g Wireless Access Point gemäß der im

BMPT-AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben

einiger Geräte (z.B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die

Anmerkungen in der Betriebsanleitung.

Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt

gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.

Certificate of the Manufacturer/Importer

It is hereby certified that the NETGEAR WG102 ProSafe 802.11g Wireless Access Point has been suppressed

in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some

Approved

Antennas Antenna Gain

and type Approved

Antenna Cable Minimum

Antenna

Cable

Length

Minimum

Antenna

Cable

Attenuation

Maximum

Transmitted

Power*

NETGEAR

ANT24D18

18 dBi,

directional

outdoor/indoor

NETGEAR

ACC-10314-05 30 m 18 dB -3 dBm + 18 dBi

= 15 dBm EIRP

NETGEAR

ANT2409

9 dBi,

omnidirectional

outdoor/indoor

NETGEAR

ACC-10314-04

ACC-10314-05

10 m 6.1 dB 8.9 dBm + 9 dBi

= 17.9 dBm EIRP

NETGEAR

ANT24O5 5 dBi, ceiling/wall

indoor

NETGEAR

ACC-10314-01

thru 05 1.5 m 1.1 dB 14 dBm + 5 dBi

= 19 dBm EIRP

October 2004

equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain

restrictions. Please refer to the notes in the operating instructions.

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market

and has been granted the right to test the series for compliance with the regulations.

Autres manuels pour WG102 - ProSafe Wireless Access Point

Table des matières

Autres manuels NETGEAR Point d'accès sans fil

NETGEAR

NETGEAR WG602v1 - Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR WAX214 Manuel utilisateur

NETGEAR

NETGEAR ProSafe WNAP320 Manuel utilisateur

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR WND930 Manuel utilisateur

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Instructions d'installation et d'entretien

NETGEAR

NETGEAR WAG102 - ProSafe Dual Band Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR WAC505 Manuel utilisateur

NETGEAR

NETGEAR WAX630 Manuel utilisateur

NETGEAR

NETGEAR HE102 - Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR Orbi RBR40 Manuel utilisateur

NETGEAR

NETGEAR WG602v2 - Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR WAX214v2 Manuel utilisateur

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR WAX214 Manuel utilisateur

NETGEAR

NETGEAR WN802T-100NAS Manuel utilisateur

NETGEAR

NETGEAR ProSAFE WN203-200PES Manuel utilisateur

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Guide rapide

NETGEAR

NETGEAR WNHDE111 Manuel utilisateur

NETGEAR

NETGEAR ProSafe WNAP320 Manuel utilisateur

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR ProSafe WG102-500 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur