NETGEAR ProSafe WNAP320 Manuel utilisateur

350 East Plumeria Drive

San Jose, CA 95134

USA

January 26, 2011

202-10724-01

v1.0

ProSafe Wireless-N Access

Point WNAP320

Reference Manual

2 |

ProSafe Wireless-N Access Point WNAP320 Reference Manual

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means without the written permission of NETGEAR, Inc.

Technical Support

Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,

visit us at http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR

Phone (Other Countries): See Support information card.

Trademarks

NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto Uplink, X-RAID2, and NeoTV are

trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are

registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or

trademarks of their respective holders.

Statement of Conditions

To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes

to the products described in this document without notice. NETGEAR does not assume any liability that may occur

due to the use, or application of, the product(s) or circuit layout(s) described herein.

Revision History

Publication Part Number Version Publish Date Comments

202-10724-01 v1.0 January 2011 First publication

Contents |3

Contents

Chapter 1 Introduction

About the ProSafe Wireless-N Access Point WNAP320 . . . . . . . . . . . . . . .6

What Is In the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

System Requirements . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Key Features and Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Supported Standards and Conventions . . . . . . . . . . . . . . . . . . . . . . . . . .8

Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

802.11b/g/n Standards–Based Wireless Networking . . . . . . . . . . . . . . .10

Autosensing Ethernet Connections with Auto Uplink . . . . . . . . . . . . . . .10

Hardware Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Top Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Bottom Panel with Product Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Chapter 2 Installation and Basic Configuration

What You Need before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Wireless Equipment Placement and Range Guidelines. . . . . . . . . . . . .14

Ethernet Cabling Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

LAN Configuration Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Computer Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Install and Configure the Wireless Access Point . . . . . . . . . . . . . . . . . . . .16

Connect the Wireless Access Point to Computer. . . . . . . . . . . . . . . . . .16

Configure Basic General System Settingsand Time Settings . . . . . . . .19

Configure IP Settings and Optional DHCP Server Settings . . . . . . . . . .21

Configure Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Test Basic Wireless Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Mount the Wireless Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Ceiling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Desk Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Chapter 3 Wireless Configuration and Security

Wireless Data Security Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Security Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Before You Change the SSID, WEP, and WPA Settings. . . . . . . . . . . .38

Configure and Enable Security Profiles . . . .. . . . . . . . . . . . . . . . . . . . .39

Configure RADIUS Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Restrict Wireless Access by MAC Address . . . . . . . . . . . . . . . . . . . . . . . .50

4| Contents

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Schedule the Wireless Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Configure Basic Wireless Quality of Service . . . . . . . . . . . . . . . . . . . . . . .52

Chapter 4 Management

Enable Remote Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

SNMP Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Secure Shell and Telnet Management. . . . . . . . . . . . . . . . . . . . . . . . . .57

Upgrade the Wireless Access Point Software . . . . . . . . . . . . . . . . . . . . . .58

Manage the Configuration File or Reset to Factory Defaults . . . . . . . . . . .60

Save the Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Restore the Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Restore the Wireless Access Point to the Factory Default Settings. . . .62

Reboot the Wireless Access Point without Restoring the

Default Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Change the Administrator Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Enable the Syslog Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Monitor the Wireless Access Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

View System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Monitor Wireless Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

View the Activity Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Traffic Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Enable Rogue AP Detection and Monitor Access Points. . . . . . . . . . . . . .72

Enable and Configure Rogue AP Detection. . .. . . . . . . . . . . . . . . . . . .72

View and Save Access Point Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Chapter 5 Advanced Configuration

Spanning Tree Protocol and 802.1Q VLAN . . . . . . . . . . . . . . . . . . . . . . . .76

Hotspot Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Configure Advanced Wireless Settings . . . . . .. . . . . . . . . . . . . . . . . . . . .79

Configure Advanced QoS Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Configure Wireless Bridging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Configure a Point-to-Point Wireless Network. . . . . . . . . . . . . . . . . . . . .85

Configure a Point-to-Multipoint Wireless Network . . . . . . . . . . . . . . . . .88

Configure the Wireless Access Point for Repeater Mode . . . . . . . . . . .92

Configure the Wireless Access Point for Client Mode . . . . . . . . . . . . . .96

Chapter 6 Troubleshooting

Basic Functioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

No LEDs Are Lit on the Wireless Access Point . . . . . . . . . . . . . . . . . . .98

The Active LED or the LAN LED Is Not Lit. . . . . . . . . . . . . . . . . . . . . . .99

The WLAN LED Does Not Light Up . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

You Cannot Access the Internet or the LAN from a

Wireless-Capable Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

You Cannot Configure the Wireless Access Point from a Browser . . . . .100

When You Enter a URL or IP Address a Time-Out Error Occurs. . . . . . .101

Troubleshooting a TCP/IP Network Using the Ping Utility . . . . . . . . . . . .101

Contents |5

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Testing the LAN Path to Your Wireless Access Point . . . . . . . . . . . . .101

Testing the Path from Your Computer to a Remote Device . . . . . . . . .102

Problems with Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Use the Packet Capture Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Appendix A Supplemental Information

Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Appendix B Command-Line Reference

Appendix C Notification of Compliance

Index

Chapter 1. Introduction |6

1. Introduction

This chapter introduces the ProSafe Wireless-N Access Point WNAP320 and describes some of

the key features. This chapter includes the following sections:

• About the ProSafe Wireless-N Access Point WNAP320 on this page

• What Is In the Box? on page 7

• System Requirements on page 7

• Key Features and Standards on page 7

• Hardware Description on page 10

About the ProSafe Wireless-N Access Point WNAP320

The ProSafe Wireless-N Access Point WNAP320 is the basic building block of a wireless

LAN infrastructure. It provides connectivity between wired Ethernet networks and

radio-equipped wireless notebook systems, desktop systems, print servers, and other

devices.

The wireless access point provides wireless connectivity to multiple wireless network devices

within a fixed range or area of coverage—interacting with a wireless network interface card

(NIC) through an antenna. Typically, an individual in-building wireless access point provides

a maximum connectivity area of about a 500-foot radius. The ProSafe Wireless-N Access

Point WNAP320 can support up to 64 users simultaneously in a range of several hundred

feet.

The ProSafe Wireless-N Access Point WNAP320 acts as a bridge between the wired LAN

and wireless clients. Connecting multiple wireless access points through a wired Ethernet

backbone can further increase the wireless network coverage. As a mobile computing device

moves out of the range of one wireless access point, it moves into the range of another. As a

result, wireless clients can freely roam from one wireless access point to another and still

maintain seamless connection to the network.

The autosensing capability of the ProSafe Wireless-N Access Point WNAP320 allows packet

transmission at up to 300 Mbps, or at reduced speeds to compensate for distance or

electromagnetic interference.

Chapter 1. Introduction |7

ProSafe Wireless-N Access Point WNAP320 Reference Manual

What Is In the Box?

The product package should contain the following items:

• ProSafe Wireless-N Access Point WNAP320

• Power adapter and cord (12 VCD, 1.0A)

• Straight-through Category 5 Ethernet cable

• NETGEAR WNAP320 Wireless-N Access Point Installation Guide

• Resource CD, which includes this manual

• Wall-mount kit made up of brackets and hardware

Contact your reseller or customer support in your area if there are any missing or damaged

parts.

Refer to the NETGEAR website at http://kbserver.netgear.com/main.asp for the telephone

number of customer support in your area. You should keep the Installation Guide, along with

the original packing materials, and use the packing materials to repack the wireless access

point if you need to return it for repair.

To qualify for product updates and product warranty, NETGEAR encourages you to register

on the NETGEAR website at http://my.netgear.com/registration/login.aspx.

System Requirements

Before installing the wireless access point, make sure that your system meets these

requirements:

• A 10/100/1000 Mbps local area network device such as a hub or switch

• The Category 5 UTP straight-through Ethernet cable with RJ-45 connector included in the

package, or one like it

• A 100–120V, 50–60 Hz AC power source

• A Web browser for configuration, such as Microsoft Internet Explorer 6.0 or later, or

Mozilla 1.5 or later

• At least one computer with the TCP/IP protocol installed

• An 802.11b/g- or 802.11n/g-compliant device, such as the NETGEAR WNDA3100

wireless adapter

Key Features and Standards

The ProSafe Wireless-N Access Point WNAP320 is easy to use and provides solid wireless

and networking support. It also offers a wide range of security options.

8| Chapter 1. Introduction

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Supported Standards and Conventions

The ProSafe Wireless-N Access Point WNAP320 supports the following standards and

conventions:

• Standards compliance.The wireless access point complies with the IEEE 802.11 b/g

standards for wireless LANs, and is Wi-Fi certified for 802.11n standard.

• Full WPA and WPA2 support. The wireless access point provides WPA and WPA2

enterprise-class strong security with RADIUS and certificate authentication as well as

dynamic encryption key generation. The WPA-PSK and WPA2-PSK preshared key

authentication is without the overhead of RADIUS servers but with all of the strong

security of WPA.

• Multiple BSSIDs. The wireless access point supports multiple BSSIDs. When a wireless

access point is connected to a wired network and a set of wireless stations, it is called a

basic service set (BSS). The basic service set identifier (BSSID) is a unique identifier

attached to the header of packets sent over a WLAN that differentiates one WLAN from

another when a mobile device tries to connect to the network.

The multiple BSSID feature allows you to configure up to eight SSIDs on your wireless

access point and assign different configuration settings to each SSID. All the configured

SSIDs are active, and the network devices can connect to the wireless access point by

using any of these SSIDs.

• DHCP client support.DHCP provides a dynamic IP address to PCs and other devices

upon request. The wireless access point can act as a client and obtain information from

your DHCP server; it can also act as a DHCP server and provide network information for

wireless clients.

• SNMP Support.Support for Simple Network Management Protocol (SNMP)

Management Information Base (MIB) management.

• 802.1Q VLAN (virtual LAN) support. A network of computers that behave as if they are

connected to the same network even though they might actually be physically located on

different segments of a LAN. VLANs are configured through software rather than

hardware, which makes them extremely flexible. VLANs are very useful for user and host

management, bandwidth allocation, and resource optimization.

Key Features

The ProSafe Wireless-N Access Point WNAP320 provides solid functionality, including the

following features:

• Multiple operating modes:

-Wireless access point. Operates as a standard 802.11b/g/n wireless access point.

-Point-to-point bridge. In this mode, the wireless access point communicates only

with another bridge-mode wireless station or wireless access point. Network

authentication should be used to protect this communication.

-Point-to-multipoint bridge. Select this only if this wireless access point is the master

for a group of bridge-mode wireless stations. The other bridge-mode wireless stations

Chapter 1. Introduction |9

ProSafe Wireless-N Access Point WNAP320 Reference Manual

send all traffic to this master, and do not communicate directly with each other.

Network authentication should be used to protect this traffic.

-Wireless repeater. In this mode, the wireless access point does not function as an

access point but communicates only with wireless stations that function in repeater

mode, point-to-point bridge mode, and point-to-multipoint-bridge mode. Network

authentication should be used to protect this communication.

-Client. In this mode, the wireless access point functions as a client bridge only, and

sends all traffic to a remote wireless access point or peer device.

• Hotspot settings. You can allow all HTTP (TCP, port 80) requests to be captured and

redirected to the URL you specify.

• Upgradeable firmware. Firmware is stored in a flash memory. You can upgrade it easily,

using only your Web browser, and you can upgrade it remotely. You can also use the

command-line interface.

• Rogue AP detection.The Rogue AP filtering feature ensures that unknown APs are not

given access to any part of the LAN.

• Access control.The Access Control MAC address filtering feature can ensure that only

trusted wireless stations can use the wireless access point to gain access to your LAN.

• Security profiles.When using multiple BSSIDs, you can configure unique security

settings (encryption, SSID, and so on) for each BSSID.

• Hidden mode. The SSID is not broadcast, assuring only clients configured with the

correct SSID can connect.

• Configuration backup. Configuration settings can be backed up to a file and restored.

• Secure and economical operation. Adjustable power output allows more secure or

economical operation.

• Power over Ethernet. Power can be supplied to the wireless access point over the

Ethernet port from any 802.3af-compliant midspan or end-span source.

• Autosensing Ethernet connection with Auto Uplink™ interface. Connects to

10/100/1000 Mbps IEEE 802.3 Ethernet networks.

• LED indicators. Power/Test, Active, LAN, and WLAN for each radio mode are easily

identified.

• Wi-FI Multimedia (WMM) support. WMM is a subset of the 802.11e standard. WMM

allows wireless traffic to have a range of priorities, depending on the kind of data.

Time-dependent information, like video or audio, has a higher priority than normal traffic.

For WMM to function correctly, wireless clients must also support WMM.

• Quality of Service (QoS) support. You can configure parameters that affect traffic

flowing from the wireless access point to the client station and traffic flowing from the

client station to the wireless access point. The QoS feature allows you to prioritize traffic,

such as voice and video traffic, so that packets do not get dropped.

• VLAN security profiles. Each security profile is automatically allocated a VLAN ID when

the security profile is modified.

10 | Chapter 1. Introduction

ProSafe Wireless-N Access Point WNAP320 Reference Manual

802.11b/g/n Standards–Based Wireless Networking

The ProSafe Wireless-N Access Point WNAP320 provides a bridge between wired Ethernet

LANs and 802.11b/g- and 802.11n-compatible wireless LAN networks. It provides

connectivity between wired Ethernet networks and radio-equipped wireless notebook

systems, desktop systems, print servers, and other devices. Additionally, the wireless access

point supports the following wireless features:

• Aggregation support

• Reduced InterFrame spacing support

• Multiple input, multiple output (MIMO) support

• Distributed coordinated function (CSMA/CA, back-off procedure, ACK procedure,

retransmission of unacknowledged frames)

• RTS/CTS handshake

• Beacon generation

• Packet fragmentation and reassembly

• Auto or long preamble

• Roaming among wireless access points on the same subnet

Autosensing Ethernet Connections with Auto Uplink

The ProSafe Wireless-N Access Point WNAP320 can connect to a standard Ethernet

network. The LAN interface is autosensing and capable of full-duplex or half-duplex

operation.

The wireless access point incorporates Auto UplinkTM technology. The Ethernet port

automatically senses whether the Ethernet cable plugged into the port should have a

“normal” connection such as to a computer or an “uplink” connection such as to a switch or

hub. That port then configures itself correctly. This feature also eliminates any concerns

about crossover cables, as Auto Uplink accommodates either type of cable to make the right

connection.

Hardware Description

This section describes the top and rear hardware functions of the ProSafe Wireless-N Access

Point WNAP320.

Autres manuels pour ProSafe WNAP320

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Point d'accès sans fil

NETGEAR

NETGEAR EX7000 Manuel utilisateur

NETGEAR

NETGEAR ProSAFE WNDAP380R Manuel utilisateur

NETGEAR

NETGEAR WN203 Manuel utilisateur

NETGEAR

NETGEAR WG602v2 - Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Manuel utilisateur

NETGEAR

NETGEAR Orbi Pro Instructions d'utilisation et d'entretien

NETGEAR

NETGEAR WG602NA Manuel utilisateur

NETGEAR

NETGEAR WN604-100NAS Manuel utilisateur

NETGEAR

NETGEAR WAX615 Manuel utilisateur

NETGEAR

NETGEAR WAC104 Manuel utilisateur

NETGEAR

NETGEAR ProSafe WG102-500 Manuel utilisateur

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR WAX615-100NAS Manuel utilisateur

NETGEAR

NETGEAR WAC124 Manuel utilisateur

NETGEAR

NETGEAR WAX610 Manuel utilisateur

NETGEAR

NETGEAR WAX220 Manuel utilisateur

NETGEAR

NETGEAR XWNB5201 Manuel utilisateur

NETGEAR

NETGEAR FWG114Pv2 - Wireless Firewall With USB Print... Manuel utilisateur

NETGEAR

NETGEAR WAX615 Manuel utilisateur

NETGEAR

NETGEAR PowerLine XWNB5602 Manuel utilisateur

NETGEAR

NETGEAR prosafe WAC740 Manuel utilisateur

NETGEAR

NETGEAR ProSafe WNAP320 Manuel utilisateur

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Instructions d'installation

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur