NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Guide rapide

WG302v2, WAG302v2 –DHCP: Use and Configuration

The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The

WG302v2/WAG302v2 provides the pre-configured TCP/IP configuration for wireless clients

connected to the access point.

The WG302v2/WAG302v2 DHCP server only assigns network information to clients that connect

to the access point through security profiles that are on the same VLAN as security profile 1.

VLAN 1 is the default VLAN for all security profiles.

Enabling the DHCP server on the WG302v2/WAG302v2 causes Network Address

Translation (NAT) to be enabled on the access point - The WG302v2/WAG302v2 in this case

acts similar to a NAT router for the wireless clients who receive their network information from the

access point. All network traffics from the wireless client designated to the wired network are

NAT-ed to the access point’s LAN IP address.

As a result, the DHCP network (wireless network) configured in the WG302v2/WAG302v2 DHCP

settings must be in a different subnet than the wired network.

NETGEAR

Internet Access RouterFirewall

LOCAL

PWR TEST 1 2

LNK

INTERNET

ACT 4

100

LNK/ACT

3

MODEL

FR314

Router

192.168.0.1

Wireless Clients 192.168.1.2-192.168.2.50

Wired device 192.168.0.x

192.168.0.228

WG302v2/WAG302v2

In the above example, the wired network where the router and the access point resided is

192.168.0.0/24. When enabling the DHCP server on the WG302v2/WAG302v2, the DHCP

network must be in a different subnet than 192.168.0.0/24. In our example, we use

192.168.1.0/24.

To enable DHCP server on the WG302v2/WAG302v2, go to Advanced->IP Settings in the access

point’s management interface. Select the radio button to enable DHCP server. Enter the starting

and ending IP Address of the DHCP pool, subnet mask, gateway IP address, primary and

secondary DNS server addresses, primary and secondary WINS server addresses and lease

time. Click Apply.

Wireless clients connect to the WG302v2/WAG302v2 will receive one of the addresses from the

DHCP pool. However, DNS Server address assigned to the wireless client will always be the

same address as the default gateway address. It was because the WG302v2/WAG302v2 uses

DNS proxying. The wireless client’s DNS requests are sendt to the access point then proxy to the

designated DNS Server specified in the DHCP setting.

This is specific for v2 of WG302 and WAG302. WG302v1 and WAG302v1 DHCP server works

differently. Refer to the reference manuals of WG302v1 and WAG302v1 on how to setup DHCP

server on those access points.

Autres manuels pour WG302v1 - ProSafe 802.11g Wireless Access...

3

Ce manuel convient aux modèles suivants

2

Table des matières

Autres manuels NETGEAR Point d'accès sans fil

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR WAX214v2 Manuel utilisateur

NETGEAR

NETGEAR WG602 - 54 Mbps Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR WPN802 Manuel utilisateur

NETGEAR

NETGEAR Orbi PRO SRS60 Manuel utilisateur

NETGEAR

NETGEAR WAX615-100NAS Manuel utilisateur

NETGEAR

NETGEAR WN802Tv1 - Wireless-N Access Point Manuel utilisateur

NETGEAR

NETGEAR WND930 Manuel utilisateur

NETGEAR

NETGEAR ProSafe Premium WNDAP660 Manuel utilisateur

NETGEAR

NETGEAR PowerLine XWNB5602 Manuel utilisateur

NETGEAR

NETGEAR XWN5001 Manuel utilisateur

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Guide rapide

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Manuel utilisateur

NETGEAR

NETGEAR WAX630 Manuel utilisateur

NETGEAR

NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S Manuel utilisateur

NETGEAR

NETGEAR ProSAFE WN203-200PES Manuel utilisateur

NETGEAR

NETGEAR WNAP210 Manuel utilisateur

NETGEAR

NETGEAR ME102 - Wireless Access Point Manuel utilisateur

NETGEAR

NETGEAR prosafe WAC740 Manuel utilisateur

NETGEAR

NETGEAR WAC720 Manuel utilisateur

NETGEAR

NETGEAR Orbi RBE970B Manuel utilisateur

NETGEAR

NETGEAR WG302 - 802.11g ProSafe Wireless Access... Manuel utilisateur

NETGEAR

NETGEAR ProSafe Premium WNDAP620 Manuel utilisateur

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur