NETGEAR WGR614v2 Manuel utilisateur

Installation Guide

Follow these quick steps to install your router.

Before you begin, locate the broadband Internet configuration settings

from your cable company. You can also consult the Install Assistant on the

GearBox™ CD for 54 Mbps Wireless Router.

1Connect the Router

a. Turn off your computer and cable or DSL modem.

b. Disconnect the Ethernet cable from your computer (A) which

connects to your cable or DSL modem.

c. Connect the Ethernet cable from your cable or DSL modem to

the Internet port (A) on the WGR614.

d. Connect the Ethernet cable which came with the router from a

Local port on the router (B) to your computer.

e. Turn on the cable or DSL modem and wait about 30 seconds for

the lights to stop blinking.

f. Now, turn on your computer. If software usually logs you in to

your Internet connection, do not run that software or cancel it if

it starts automatically.

g. Verify the following:

When you turn the router on, the power light goes on.

The local lights are lit for any connected computers.

The Internet light is lit, indicating a link has been

established to the cable or DSL modem.

Note: For wireless placement and range guidelines, and wireless

configuration instructions, please see the Reference Manual on

the GearBox CD for 54 Mbps Wireless Router.

2Log In to the Router

Note: To connect to the router, your computer needs to be

configured to obtain an IP address automatically via DHCP. For

instructions on how to do this, please see Appendix C in the

Reference Manual on the GearBox CD for 54 Mbps Wireless Router.

a. Connect to the router by typing http://192.168.0.1 in the address

field of Internet Explorer or Netscape®Navigator.

Cable or DSL modem

b. For security reasons, the router has its own user name and

password. When prompted, enter admin for the router user

name and password for the router password, both in lower

case letters.

Note: The user name and password are not the same as any user

name or password you may use to log in to the Internet.

3Connect to the Internet

a. You are now connected to the router. If you do not see the menu

above, click the Setup Wizard link on the upper left of the

main menu.

b. Click Next to follow the steps in the Setup Wizard to input the

router configuration settings. See the green ISP Guide for help

with identifying your ISP settings.

c. At the end of the Setup Wizard, click the Test button to verify

your Internet connection and register your product.

Note: If you were unable to connect to the router, please refer to

“Basic Functioning”in the “Troubleshooting”chapter of the

Reference Manual on the GearBox CD for 54 Mbps Wireless Router.

Cable/DSL 54 Mbps Wireless Router WGR614

Wireless Router

WGR614

Cable or DSL modem

Wireless Router

WGR614

Cable or DSL modem

All manuals and user guides at all-guides.com

all-guides.com

*M-10059-01*

M-10059-01 March 2003

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT

SHIPPED WITH YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can pro-

vide you with faster expert technical support and timely notices of product

and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only)

See Support information card for other countries.

E-mail: support@NETGEAR.com

www.NETGEAR.com

Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States

and/or other countries. Microsoft and Windows are registered trademarks of Microsoft

Corporation in the United States and/or other countries. Other brand and product names

are trademarks or registered trademarks of their respective holders. Information is subject to

All manuals and user guides at all-guides.com

Ce manuel convient aux modèles suivants

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR SRK60 Manuel utilisateur

NETGEAR

NETGEAR orbi CBK40 Manuel utilisateur

NETGEAR

NETGEAR SXK30 Manuel utilisateur

NETGEAR

NETGEAR R6300 Manuel utilisateur

NETGEAR

NETGEAR XE102 - Wall-Plugged EN Bridge Manuel utilisateur

NETGEAR

NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium... Manuel utilisateur

NETGEAR

NETGEAR Nighthawk AC1900 D7000v2 Manuel utilisateur

NETGEAR

NETGEAR RBR850 Manuel utilisateur

NETGEAR

NETGEAR SRK60B04 Manuel utilisateur

NETGEAR

NETGEAR XE104 - 85 Mbps Wall-Plugged EN Switch... Manuel utilisateur

NETGEAR

NETGEAR RP614 - Web Safe Router Manuel utilisateur

NETGEAR

NETGEAR DGN2000 - Wireless Router Manuel utilisateur

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Manuel utilisateur

NETGEAR

NETGEAR Orbi Manuel utilisateur

NETGEAR

NETGEAR R6400v1 Manuel utilisateur

NETGEAR

NETGEAR ProSafe FVS318N Manuel utilisateur

NETGEAR

NETGEAR N300 Manuel utilisateur

NETGEAR

NETGEAR R7960P Manuel utilisateur

NETGEAR

NETGEAR N450 WNR2500 Manuel utilisateur

NETGEAR

NETGEAR MCA1001v2 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk D7000 Manuel utilisateur

NETGEAR

NETGEAR orbi RBK652S Manuel utilisateur

NETGEAR

NETGEAR Nighthawk AX4 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk CAX30 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur