NETGEAR GS908 Manuel utilisateur

Installation

Connect the Switch to

Your Network

1. Connect a LAN port on the switch to a

LAN port on a router that is connected to

the Internet.

2. Connect your devices to the other LAN

ports on the switch.

3. Connect the power adapter to the switch

and plug the power adapter into an

electrical outlet.

4. Turn on the switch by moving the

OFF/ON slider next to the DC input

connector to the ON position.

The blue Power LED on the front of the

switch lights.

8-Port Gigabit Ethernet Unmanaged

Switch with Integrated Cable Management

Model GS908

ON/STANDBY

OPEN?CLOSE PLAY STOP

P-SCAN

POWER

DVDPLAYER

PROGRESSIVESCAN

GS908 switch

Router

Sample connections

Internet

The port LEDs light as follows:

• O. No link.

• Solid green. 1 Gbps link

• Solid yellow. 100 or 10 Mbps link

• Blinking green. 1 Gbps trac

• Blinking yellow. 100 or 10 Mbps trac

Note: To turn o all LEDs, press the LED On/O button.

Package contents

Uplink

OFF/ON sliderLED On/O

November 2017

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

Wall-Mount the Switch

1. Locate the two mount holes on the bottom panel of the switch.

2. Locate the M3.5 x 16 mm screws and anchors in the switch package.

3. Mark and drill two mounting holes in the wall where you want to

mount the switch.

The two mounting holes must be at a precise distance of 5.8 in.

(147.5 mm) from each other.

4. Insert the anchors into the wall and tighten the screws with a No. 2

Phillips screwdriver.

Leave about 0.125 in. (about 4 mm) of each screw protruding from

the wall so that you can insert the screws into the holes on the

bottom panel.

5. Line up the holes on the bottom panel with the screws in the wall and

mount the switch to the wall.

Speciﬁcations

Speciﬁcation Description

Network interfaces Eight RJ-45 connectors for 10BASE-T, 100BASE-TX, or

1000BASE-T

Network cable Category 5 (Cat 5) or better Ethernet cable

Power adapter input 100–240V 50/60 Hz

Power adapter output 12V @ 0.5A

Power consumption 3.1W maximum

Dimensions (W x D x H) 9.22 x 6.46 x 1.29 in. (234 x 164 x 33 mm)

Weight 0.79 lb (0.360 kg)

Operating temperature 32–104°F (0–40°C)

Operating humidity 10%–90% relative humidity, noncondensing

Support

For more information about the switch, visit

www.netgear.com/support/product/GS908.

Thank you for purchasing this NETGEAR product. You can visit

www.netgear.com/support to register your product, get help, access

the latest downloads and user manuals, and join our community. We

recommend that you use only ocial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en

français canadien à http://downloadcenter.netgear.com/other/.

(If this product is sold in Canada, you can access this document in

Canadian-French at http://downloadcenter.netgear.com/other/.)

For the current EU Declaration of Conformity, visit

http://kb.netgear.com/app/answers/detail/a_id/11621.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power

supply.

Table des matières

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR AirCard 781S Guide de dépannage

NETGEAR

NETGEAR R7960P Manuel utilisateur

NETGEAR

NETGEAR NIGHTHAWK R7000 Manuel utilisateur

NETGEAR

NETGEAR Orbi Pro WiFi 6 AX6000 Manuel utilisateur

NETGEAR

NETGEAR ProSafe FVS318v3 Manuel utilisateur

NETGEAR

NETGEAR PR2000 Manuel utilisateur

NETGEAR

NETGEAR DG834GT - 108 Mbps Super G Wireless ADSL... Manuel utilisateur

NETGEAR

NETGEAR Nighthawk RS400 Manuel utilisateur

NETGEAR

NETGEAR orbi RBK652S Manuel utilisateur

NETGEAR

NETGEAR Nighthawk M6 Pro Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4S D7800 Manuel utilisateur

NETGEAR

NETGEAR R6900v2 Manuel utilisateur

NETGEAR

NETGEAR C6300 Manuel utilisateur

NETGEAR

NETGEAR C6250 Manuel utilisateur

NETGEAR

NETGEAR Super-G WGT624 Guide de l'utilisateur

NETGEAR

NETGEAR XEB1004 - 85 Mbps Powerline EN Switch Manuel utilisateur

NETGEAR

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Guide rapide

NETGEAR

NETGEAR D6200 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk XR700 Manuel utilisateur

NETGEAR

NETGEAR FE508 - Hub Manuel utilisateur

NETGEAR

NETGEAR JGS524FNA Manuel utilisateur

NETGEAR

NETGEAR FS308 - Switch Manuel utilisateur

NETGEAR

NETGEAR DG834G Manuel

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur