NETGEAR Super-G WGT624 Guide de l'utilisateur

208-10123-01

April 2007

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Router Setup Manual

v1.0, April 2007

Trademarks

NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective

holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

iii

v1.0, April 2007

Contents

Router Setup Manual

Chapter 1

Connecting the Router to the Internet

What’s in the Box? ..........................................................................................................1-1

The Router Bottom Label .........................................................................................1-1

The Front of the Router ............................................................................................1-2

The Back of the Router ............................................................................................1-3

What You Need Before You Begin ..................................................................................1-3

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup ......................................1-4

Smart Wizard Setup .......................................................................................................1-4

Manual Setup .................................................................................................................1-5

Connecting Your Router ...........................................................................................1-5

Setting Up Your Router for Internet Access .............................................................1-8

Set Up and Test Basic Wireless Connectivity .................................................................1-9

Implement Appropriate Wireless Security ....................................................................1-10

Product Registration, Support, and Documentation .....................................................1-10

Chapter 2

Troubleshooting

Quick Tips .......................................................................................................................2-1

Be sure to always start your network in this sequence: ..........................................2-1

Make sure the Ethernet cables are securely plugged in. .........................................2-1

Make sure the network settings of the computer are correct. .................................2-1

Check the router status lights to verify correct router operation. .............................2-2

To Verify Basic Functioning ............................................................................................2-2

Power Light Not On ..................................................................................................2-2

Test Light Never Turns On or Stays On ...................................................................2-3

LAN or Internet Port Lights Not On ..........................................................................2-3

Troubleshooting Logging In to the Router ......................................................................2-3

v1.0, April 2007

Troubleshooting the Internet Service Connection ...........................................................2-4

Internet Connection ..................................................................................................2-4

Obtaining an Internet IP Address .............................................................................2-4

Troubleshooting PPPoE ...........................................................................................2-5

Troubleshooting Internet Browsing ..........................................................................2-6

Restoring the Default Configuration and Password ........................................................2-6

Advanced Troubleshooting Using the Ping Utility ...........................................................2-7

Testing the Path from a PC to Your Router ..............................................................2-7

Testing the Path from a PC to the Internet ...............................................................2-8

Appendix A

Technical Specifications

Appendix B

Related Documents

Connecting the Router to the Internet 1-1

v1.0, April 2007

Chapter 1

Connecting the Router to the Internet

This chapter describes how to connect your router and how to access the Internet through it.

What’s in the Box?

The product package should contain the following items:

• The router

• An AC power adapter (varies by region)

• Vertical stand

• A yellow Ethernet cable

•Resource CD, including:

– The Smart Wizard Installation Assistant

– This manual

• Warranty and Support Information cards

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the

carton, including the original packing materials, in case you need to return the product for repair.

The Router Bottom Label

View the label on the bottom of the router to identify the serial number, security PIN number, port

connectors, status lights, and default login information.

Router Setup Manual

1-2 Connecting the Router to the Internet

v1.0, April 2007

The Front of the Router

You can use the status lights on the front of the router to verify various conditions.

Figure 1-1

Table 1-1. Status Lights

Status Light Activity Description

1. Power On

Off Power is supplied to the router.

Power is not supplied to the router.

2. Test On

Blink

Off

The system is initializing or in the middle of a firmware upgrade.

Firmware is upgrading or restoring to factory default is done.

The system is ready and running.

3. Wireless

Blink

Off

Indicates that the Wireless port is enabled.

Data transfer

The wireless router radio is off. (See Advanced Wireless Settings in

the Reference Manual.)

4. Internet

On -- Amber

On -- Green

Blink -- Green

Off

The Ethernet cable is connected but the router has not gotten an

Internet address.

The router has an Internet address.

Data is being communicated with the Internet.

No link is detected on this port.

5. LAN (Local Area

Network) Lights

1-4

On (Green)

Blink (Green)

On (Amber)

Blink (Amber)

Off

The local port is connected to a 100 Mbps device.

Data is being transmitted at 100 Mbps.

The local port has detected a link with a 10 Mbps device.

Data is being transmitted at 10 Mbps.

No link is detected on this port.

Router Setup Manual

Connecting the Router to the Internet 1-3

v1.0, April 2007

The Back of the Router

The back of the router has the following port connections:

1. Power adapter port

2. Four local Ethernet ports for connecting the local computers

3. Internet port for connecting to a cable or ADSL modem

4. Factory default reset button

5. Wireless antenna

What You Need Before You Begin

Prepare the following before you set up your router:

• Internet service.

• The configuration information your Internet Service Provider (ISP) gave you. Depending on

how your Internet account was set up, your may need one or more of these settings for the

router to access the Internet:

– Host and Domain Names

– Internet Login Name and Password (frequently an email address and password)

– Domain Name Server (DNS) Addresses

Figure 1-2

Router Setup Manual

1-4 Connecting the Router to the Internet

v1.0, April 2007

– Fixed or Static IP Address

Your ISP should have provided you with all the information needed to connect to the Internet.

If you cannot locate this information, you can ask your ISP to provide it.

• For cable modem service, use the computer you first used to set up your Internet service.

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup

You have two methods available for setting up your router.

•Smart Wizard Setup: Click Setup on the CD to use the Smart Wizard.

– This option is the easiest. The wizard guides you through the setup process, automates

many of the steps, and verifies that necessary conditions exist and that steps you perform

have been successfully completed.

– This option requires a PC running Microsoft Windows.

•Manual Setup: This option is best if you cannot use the wizard on the CD, are replacing an

existing router, or are technically knowledgeable. Follow the instructions in this manual to set

up your router.

Use the setup option that best suites you.

Smart Wizard Setup

The wizard setup process should take about 20 minutes to complete.

1. Insert the NETGEAR Resource CD into a Windows PC. The CD will automatically start and

detect the language you are using on your PC. Accept the language option or change to a

different language.

2. Click Setup to start the Smart Wizard installation assistant. Follow the wizard instructions.

Note: If the CD does not automatically start, browse the CD and double-click on

Autorun.

Router Setup Manual

Connecting the Router to the Internet 1-5

v1.0, April 2007

Manual Setup

There are two steps to setting up your router:

1. Connect the router to the ADSL or cable modem, and connect a computer to the router.

2. Configure the router to use your Internet service.

Connecting Your Router

1. Connect the router, the computer, and the modem.

a. Turn off your computer.

b. Turn off and unplug the cable or ADSL broadband modem.

c. Locate the Ethernet cable (1) that connects your computer to the modem.

d. Disconnect the cable at the modem end only (2).

Note: Your computer has to be set to automatically get its TCP/IP network settings

from the router via DHCP. This is usually the case. If your are unsure about

this, use the wizard on the CD which automatically takes care of this for you,

or refer to the documentation for your computer.

Figure 1-3

Router Setup Manual

1-6 Connecting the Router to the Internet

v1.0, April 2007

e. Securely insert the free end of the cable (1) into a LAN port on the router, such as LAN

port 4 (3).

f. Securely insert the yellow cable (5) that came with your router into the yellow Internet

port of the router (4) and the other end into the modem (2).

Your network cables are connected and you are ready to start your network.

Figure 1-4

Figure 1-5

Autres manuels pour Super-G WGT624

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NETGEAR Routeur réseau

NETGEAR

NETGEAR ETHERNET SWITCH SW108 Manuel utilisateur

NETGEAR

NETGEAR PR2000 Manuel utilisateur

NETGEAR

NETGEAR WNR2000v2 - Wireless- N 300 Router Manuel utilisateur

NETGEAR

NETGEAR PR2000 Manuel utilisateur

NETGEAR

NETGEAR ProSafe FR114P Manuel utilisateur

NETGEAR

NETGEAR C6220 Manuel de l'opérateur

NETGEAR

NETGEAR RM356 RM356 RM356 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk RS400 Manuel utilisateur

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Manuel utilisateur

NETGEAR

NETGEAR ME101 - Wireless EN Bridge Network Converter Manuel utilisateur

NETGEAR

NETGEAR Super-G WGT624 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk R7100LG Manuel utilisateur

NETGEAR

NETGEAR GS308P Manuel utilisateur

NETGEAR

NETGEAR MR814 v3 Manuel utilisateur

NETGEAR

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet... Manuel utilisateur

NETGEAR

NETGEAR DG834G Manuel utilisateur

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Manuel utilisateur

NETGEAR

NETGEAR Nighthawk R7400 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4S AC2600 Manuel utilisateur

NETGEAR

NETGEAR RT328 Manuel utilisateur

NETGEAR

NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Manuel utilisateur

NETGEAR

NETGEAR XE102 - Wall-Plugged EN Bridge Manuel utilisateur

NETGEAR

NETGEAR WGR614v9 - 54 Mbps Wireless Router Guide de l'utilisateur

NETGEAR

NETGEAR Orbi RBR20 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur